3.2.7.5.3
|
RPM of fan
|
:
|
|
|
3.2.7.5.4
|
Material of fan
|
:
|
|
|
3.2.8.
|
Induction system
|
|
|
|
3.2.8.1.
|
Supercharging: yes/no(1)
|
:
|
|
|
3.2.8.1.1.
|
Make(s)
|
:
|
|
|
3.2.8.1.2.
|
Type(s)
|
:
|
|
|
3.2.8.1.3.
|
Description of system [example: maximum boost pressure …..... kPa, waste gate (where appropriate)]
|
:
|
|
|
3.2.8.2.
|
Intercooler: with/without(1)
|
:
|
|
|
3.2.8.3.
|
Description and drawings of induction pipe work and accessories (plenum chamber, heating device, additional air intakes, etc.):
|
:
|
|
|
3.2.8.3.1.
|
Description of induction manifold (with drawings and/or photos):
|
:
|
|
|
3.2.8.3.2.
|
Air filter,
|
:
|
|
|
3.2.8.3.2.1.
|
Make
|
:
|
|
|
3.2.8.3.2.2.
|
Type
|
:
|
|
|
3.2.8.3.2.3
|
Part no./Identification number(ID)/Drawing No.
|
:
|
|
|
3.2.8.3.2.4
|
Schematic dimensional drawing
|
:
|
|
|
3.2.8.3.3.
|
Inlet silencer, drawings
|
:
|
|
|
|
or
|
:
|
|
|
3.2.8.3.3.1.
|
Make(s)
|
:
|
|
|
3.2.8.3.3.2.
|
Type(s)
|
:
|
|
|
3.2.9.
|
Exhaust system
|
|
|
|
3.2.9.1.
|
Drawing of complete exhaust system with identification (if proprietary) or part no (if non-proprietary)
|
:
|
|
|
3.2.9.2
|
Silencer (if proprietary)
|
:
|
|
|
3.2.9.2.1
|
Make
|
:
|
|
|
3.2.9.2.2
|
Type
|
:
|
|
|
3.2.9.2.3
|
Number
|
:
|
|
|
3.2.9.2.4
|
Part no./Identification number (ID)/Drawing No.
|
|
|
|
3.2.10.
|
Minimum cross-section of the inlet and exhaust ports
|
:
|
|
|
3.2.11.
|
Induction system or equivalent data
|
|
|
|
3.2.11.1.
|
Maximum valve lift, opening and closing angles in relation to the dead centers, or data concerning the settings of other possible systems
|
:
|
|
|
3.2.11.2.
|
Reference and/or setting ranges(1)
|
:
|
|
|
3.2.12.
|
Anti-air pollution measures adopted
|
|
|
|
3.2.12.1.
|
Crankcase-gas recycling device, solely in the case of four-stroke engines description and drawings):
|
:
|
|
|
3.2.12.2.
|
Additional anti-pollution devices, if any (where present and not included under another heading)
|
:
|
|
|
3.2.12.2.1.
|
Catalytic converter make and identification
|
:
|
|
|
3.2.12.2.1.1
|
Type
|
:
|
|
|
3.2.12.2.1.2
|
Number of catalytic converters and elements
|
:
|
|
|
3.2.12.2.1.3
|
Dimensions, shape and volume of the catalytic converter(s)
|
:
|
|
|
3.2.12.2.1.4
|
Substrate(structure and material )
|
:
|
|
|
3.2.12.2.1.5
|
Cell density
|
:
|
|
|
3.2.12.2.1.6
|
Type of casing for the catalytic converter(s)
|
:
|
|
|
3.2.12.2.3
|
Total charge of precious metal g/vehicle.
|
:
|
|
|
3.2.12.2.4
|
Relative concentration (%) of Pt : Rh : Pd
|
:
|
|
|
3.2.12.2.5
|
Diagram indicating the arrangement and position of catalyst w.r.t. exhaust manifold.
|
:
|
|
|
3.2.13
|
Secondary Air Injection (yes/no) (1)
|
:
|
|
|
3.2.13.1
|
Make and identification
|
:
|
|
|
3.2.14
|
Fuel temperature 0C: (for diesel engines at the injection pump inlet)
|
:
|
|
|
3.2.14.1
|
Minimum
|
:
|
|
|
3.2.14.2
|
Maximum
|
:
|
|
|
3.2.15
|
Lubricant Temperature 0C (Location of measurement be specified )
|
:
|
|
|
3.2.15.1
|
Minimum
|
:
|
|
|
3.2.15.2
|
Maximum
|
:
|
|
|
3.3.
|
Electric traction motor (yes / no)
|
:
|
|
|
3.4.
|
Lubrication system
|
|
|
|
3.4.1.
|
Description of system
|
:
|
|
|
3.4.1.1
|
Location of oil reservoir (if any)
|
:
|
|
|
3.4.1.2
|
Feed system (pump/injection into induction system/mixed with the fuel, etc.)(1)
|
:
|
|
|
3.4.1.3
|
Lubrication oil grade
|
:
|
|
|
3.4.2.
|
Lubricant mixed with the fuel
|
:
|
|
|
3.4.2.1.
|
Percentage
|
:
|
|
|
3.4.3.
|
Oil cooler: yes/no(1)
|
:
|
|
|
3.4.3.1.
|
Drawing(s):
|
:
|
|
|
|
Or
|
:
|
|
|
3.4.3.1.1.
|
Make(s)
|
:
|
|
|
3.4.3.1.2.
|
Type(s):
|
:
|
|
|
3.5
|
Electronic Control Unit (ECU)
|
:
|
|
|
3.5.1
|
Make
|
:
|
|
|
3.5.2
|
Type/Part no./Identification number(ID)/Drawing No.
|
:
|
|
|
3.5.3
|
Calibration Identification number(ID) (If applicable)
|
:
|
|
|
3.5.4
|
Adjustment possibilities ,( Yes / No )
|
:
|
|
|
3.6
|
Exhaust Gas Re-circulating System
|
:
|
|
|
3.6.1
|
Brief description of the system
|
:
|
|
|
3.6.2
|
Type ( Cooled / Non-cooled/ Progressive/ On-Off/ Any Other )
|
:
|
|
|
