Use SCP command on R3 to pull the configuration file from R1.
Use SCP to copy the configuration file that you created in Step2a to R3.
R3# copy scp: flash:
Address or name of remote host []? 10.2.2.1
Source username [R3]? admin
Source filename []? R1-Config
Destination filename [R1-Config]? [Enter]
Password: cisco12345
!
2007 bytes copied in 9.056 secs (222 bytes/sec)
Unfortunately it wont copy to R3 only copies to itself
Save the configuration.
Save the running configuration to the startup configuration from the privileged EXEC prompt.
R1# copy running-config startup-config
In Part 3 of this lab, you will:
The role-based CLI access feature allows the network administrator to define views, which are a set of operational commands and configuration capabilities that provide selective or partial access to Cisco IOS EXEC and configuration (config) mode commands. Views restrict user access to the Cisco IOS CLI and configuration information. A view can define which commands are accepted and what configuration information is visible.
Note: Perform all tasks on both R1 and R3. The procedures and output for R1 are shown here.
Share with your friends: | 
