Configure the serial interfaces to use OSPF authentication

Configure the serial interfaces to use OSPF authentication.

1. 
   Use the ip ospf authentication command to assign the key-chain to the serial interface on R1 and R3.
   

R1(config-if)# ip ospf authentication key-chain NetAcad

R1(config)#

Feb 17 21:24:45.309: %OSPF-5-ADJCHG: Process 1, Nbr 10.2.2.2 on Serial0/0/0 from FULL to DOWN, Neighbor Down: Dead timer expired

R3(config)# interface s0/0/1

R3(config-if)# ip ospf authentication key-chain NetAcad

R3(config)#

*Feb 17 21:23:14.078: %OSPF-5-ADJCHG: Process 1, Nbr 10.2.2.2 on Serial0/0/1 from FULL to DOWN, Neighbor Down: Dead timer expired

2. 
   Use the ip ospf authentication command to assign the key-chain to both serial interfaces on R2.
   

R2(config-if)# ip ospf authentication key-chain NetAcad

R2(config)# interface serial 0/0/1

R2(config-if)# ip ospf authentication key-chain NetAcad

R2(config-if)#

Feb 17 21:36:25.114: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.1.1 on Serial0/0/0 from LOADING to FULL, Loading Done

Feb 17 21:36:30.686: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.3.1 on Serial0/0/1 from LOADING to FULL, Loading Done

3. 
   
   Download 162.04 Kb.
   
   Share with your friends: