Step 4: Save the configuration on routers R1 and R3.
Save the running configuration to the startup configuration from the privileged EXEC prompt.
In Part 4 of this lab, you will:
Secure the Cisco IOS image and configuration files.
Configure SNMPv3 security using an ACL.
Using NTP, configure a router as a synchronized time source for other devices.
Configure syslog support on a router.
Install a syslog server on a PC and enable it.
Configure the logging trap level on a router.
Make changes to the router and monitor syslog results on the PC.
Note: Perform all tasks on both R1 and R3. The procedure and output for R1 is shown here.
Share with your friends: | 
