Com 226 comp trouble shooting II theory book
Download 1.89 Mb. View original pdf
|
| 278 Conflict Troubleshooting 3. Click OK until you return to the hardware list. 4. Click the plus sign (+) next to the type of hardware that you want to disable. 5. Double-click the hardware that you want to disable. 6. In the Device usage area, click the box next to the configuration marked Current to remove the check mark. 7. Click the Resources tab. 8. If there is a Set configuration manually button, Windows 95 can disable and free up resources used by this hardware without your removing its card from your computer. Do you see a Set configuration manually button? - If the button exists, you can effectively disable the device, so go to Step 19. - If the button is not available, go to Step 25. Step 22: All devices are in use Write down a list of all devices using resources 1. Scroll through the resource settings. On apiece of paper, write down the name of each piece of conflicting hardware and its setting. 2. Click Cancel until you return to the hardware list. Rearrange resource settings for conflicting hardware 1. On the hardware list, click the plus sign (+) next to the hardware type for the first item on your written list. 2. Double-click the hardware. 3. Click the Resources tab. 4. Double-click the resource setting that you wrote down. If you see a message that says You must clear the Use automatic settings box before you can change a resource setting click OK to close the message, then clear the Use automatic settings box. 5. Scroll through the available resource settings. For each setting, look in the Conflicting device list box to see if it conflicts with any other hardware. 6. If you find a free setting other than the one you wrote down, write down the new values, and continue. 7. If you do not find a free setting, repeat steps 1 through 5 until you run out of hardware to try or you find a free setting. Did you find a free resource setting - If you found free resources, go to Step 26. - If you could not locate free resources, go to Step 27. Step 23: Resource information is available Check to see if the device can use a different resource 1. Click the Resources tab. 2. In the Resource settings box, double-click the resource setting that you need to free for the other device. If you see a message that says You must clear the Use Automatic Settings box before you can change a resource setting click OK to close the message, then clear the Use automatic settings box. Download 1.89 Mb. Share with your friends:
|