D. M. K. M dissanayake
Install an SSH client on PC-A and PC-C
Download 409.56 Kb. View original pdf
|
| Install an SSH client on PC-A and PC-C. • If the SSH client is not already installed, download either TeraTerm or PuTTY. • Save the application to the desktop. Note: The procedure described here is for PuTTY and pertains to PC-A. • Verify SSH connectivity to R from PC-A. • Launch PuTTY by double-clicking the putty.exe icon. • Input the R Fa IP address 192.168.1.1 in the Host Name (or IP address) field. • Verify that the SSH radio button is selected. • Click Open. • In the PuTTY Security Alert window, click Yes. • Enter the admin username and password cisco12345 in the PuTTY window. • At the R privileged EXEC prompt, enter the show users command. Rb show users What users are connected to router Rat this time Line User Hosts) Idle Location 0 con 0 admin idle 00:45:40 *196 vty 0 admin idle 00:00:00 Interface User Mode Idle Peer Address _____________________________________________________________________________ _______ • Close the PuTTY SSH session window. • Try to open a Telnet session to your router from PC-A. Were you able to open the Telnet session Explain. ___No. the Telnet session fails because only SSH is enabled for the vty lines • Open a PuTTY SSH session to the router from PC-A. Enter the user01 username and password user01pass in the PuTTY window to try connecting for user who does not have privilege level of 15. If you were able to login, what was the prompt Unauthorized access strictly prohibited messege displayed _____________________________________________________________________________ _______ • Use the enable command to enter privilege EXEC mode and enter the enable secret password Download 409.56 Kb. Share with your friends:
|