General information
Download 0.55 Mb.
|
- Navigate this page:
- AIR REEL
HURST HOSEThere shall be six (6) 100’ sections of genuine Hurst brand hydraulic hose provided. Each section of this hose shall be the following colors:
CASCADE AIR SYSTEM STORAGE BOTTLE(S)- ASME The cascade system shall be provided with an air storage system consisting of:
CONTAINMENT FILLING STATION - TWO (2) POSITION An Eagle SideWinder X2 mobile fill station shall be provided. The fill station shall have the capacity for filling two (2) SCBA cylinders simultaneously or separately. The enclosure shall be designed to contain the impact of suddenly expanded high pressure air and all displaced fragments in the unlikely event of a cylinder or fill component rupture. The containment design shall feature a loading door that is trapped inside the fill enclosure cabinet frame when closed. The enclosure shall include an automatic, safety interlock to prevent filling unless the loading door is completely in the closed position and a safety relief valve to protect operators in the event that the SCBA fill pressure exceeds 4750 PSIG. The external construction of the high pressure, breathing air fill station shall be appliance-like; using formed, fabricated steel structures and panels without visible welds, burrs or grinding marks. The fill station must allow the complete fill process to be accomplished from the front and include an access door control that enhances the enclosure containment design, is simple to operate and requires minimal physical operator effort. Two (2) fill whips, each fitted with a cylinder fill adapter, shut-off valve and pressure bleed valve shall be located within the enclosure. The access door assembly shall include two (2) integral, steel cylinder sleeves to secure the SCBA cylinders while being filled. The assembly shall include a handle permitting the operator to slide the access door clear of the enclosure frame and swing-out the cylinder sleeves towards the operator for loading and unloading cylinders with minimal effort. The access door shall be supported on the enclosure frame with an adjustable bearing bushing on each side assuring a balanced and smooth rotation when opening and closing. The SCBA cylinder fill control system shall include a regulated air control panel with all components, devices and piping arrangement necessary to direct supplied compressed high pressure breathing air to the SCBA cylinders being filled. Additionally, an inlet CGA connection and flow valve shall be provided to direct high pressure breathing air from an external source to the air storage system. The control system shall include a dual regulator package for safely filling SCBA cylinders with two (2) different pre-set pressures. The package shall include installation of the standard and an additional regulator behind the panel at pre-set pressures. A selector button located at the control panel shall be required to select air flow from the regulator with the highest pre-set pressure. A pneumatic actuator valve shall return the air flow to the low pressure regulator after every high pressure fill cycle. FILL CONTROL PANEL The cascade air system fill control system shall include a control panel with all components, devices and piping necessary to provide breathing air from the storage cylinders to the SCBA bottles being filled. The control panel shall be custom fabricated from stainless steel. The fill control system shall be designed for the number of storage banks listed above. The system shall permit filling or drawing down each air storage cylinder, independently of each other, while filling SCBA/SCUBA cylinders. The system shall allow regulating the fill pressure into any SCBA cylinder to prevent over-pressurization. A regulated air outlet gauge shall be provided downstream of the regulator to view the regulated pressure. All gauges provided shall all be liquid filled, 2 ½”, 0-7500 psi. Valves shall be 6000 psi working pressure, soft seat type. The adjustable pressure regulator shall be a one handed, self relieving, 6000 psi type. At a minimum the fill control panel shall include the following:
All panel components shall be clearly marked with permanently affixed, engraved nameplates.
AIR REELOne (1) CMW Products #6011 air reel shall be provided in compartment D-4. The reel shall be used for 100’ of 3/8” air hose for air tools as specified. The reel shall be provided with a 12-volt electric rewind switch that is guarded to prevent accidental operation and labeled for its intended use. The switch shall be protected with a breaker and installed at a height not to exceed 72 inches above the operators standing position. A captive roller assembly shall be provided to aid in the payout and loading of the reel. A ball stop shall be provided to prevent the air hose from being wound on the reel. A label shall be provided in a readily visible location adjacent to the reel. The label shall indicate size and length of the air hose. The air hose shall be 3/8” hose, 100’ in length. The location of this reel will be the D-4 compartment, mounted high, above the rollup door. Directory: specifications specifications -> Petroleum Development Oman L. L. C. Document Title: Specification for hse cases specifications -> Health, safety and environment specification specifications -> Kieran Goodson bsc Games Technology specifications -> Test cryostat for encapsulated, 36-fold segmented agata detectors General specifications -> General The agata cryostat (see Figs. 1 and 2) specifications -> For highway construction oregon department of transportation salem, oregon specifications -> Typical Properties of ensolite efo crushed cellular foam specifications -> Typical Properties of ensolite sfo crushed cellular foam Download 0.55 Mb. Share with your friends:
|