For highway construction oregon department of transportation salem, oregon


SP02560 (2015 Specifications: 11-13-14)



Download 1.43 Mb.
Page38/38
Date29.01.2017
Size1.43 Mb.
#12506
1   ...   30   31   32   33   34   35   36   37   38



SP02560 (2015 Specifications: 11-13-14)



SECTION 02560 - FASTENERS



(Follow all instructions. If there are no instructions above a subsection, paragraph, sentence, or bullet, then include them in the project. The specifications may be modified to include project specific specifications, but all additions, deletions, or modifications must be sent to the ODOT Technical Resource and Senior Specifications Engineer for review and approval.)
Comply with Section 02560 of the Standard Specifications modified as follows:
02560.30  Tie Rods and Anchor Bolts - Replace this subsection with the following subsection:
02560.30  Tie Rods, Anchor Bolts, and Anchor Rods:
(a)  Steel Tie Rods, Anchor Bolts, and Anchor Rods - Steel tie rods, anchor bolts, and anchor rods shall conform to: AASHTO M 314, Grade 36 or 55; ASTM F 1554, Grade 36 or 55.
(b)  High-Strength Tie Rods, HighStrength Anchor Bolts, and HighStrength Anchor Rods - High-strength tie rods, highstrength anchor bolts, and highstrength anchor rods shall conform to: AASHTO M 314, Grade 105; ASTM F 1554, Grade 105; or ASTM A 449, Type 1.
(c)  Nuts - Nuts for tie rods, anchor bolts, and anchor rods shall conform to the requirements of the following, or equivalent:
Plain Steel Tie Rods, Anchor Bolts, and Anchor Rods:
All - Heavy Hex AASHTO M 291 (ASTM A 563), Grade A
Galvanized Steel Tie Rods, Anchor Bolts, and Anchor Rods:
All - Heavy Hex AASHTO M 291 (ASTM A 563), Grade A, C, D, or DH
Plain Or Galvanized High-Strength Tie Rods, HighStrength Anchor Bolts, and HighStrength Anchor Rods:
All - Heavy Hex AASHTO M 291 (ASTM A 563), Grade DH
(d)  Washers - Washers for anchor bolts shall conform to ASTM F 436, Type 1.
02560.40  Galvanizing and Coating of Fasteners, Tie Rods, and Anchor Bolts - Replace this subsection title with the title "Galvanizing and Coating:"
02560.40(a)  Galvanizing of Fasteners, Tie Rods, and Anchor Bolts - Replace this subsection with the following subsection:
02560.40(a)  Galvanizing of Fasteners, Tie Rods, Anchor Bolts, and Anchor Rods - Hot-dip galvanize fasteners, tie rods, anchor bolts, anchor rods, nuts, and washers according to AASHTO M 111 (ASTM A 123) or AASHTO M 232 (ASTM A 153) as appropriate to the product.
When specified, mechanically galvanize fasteners according to ASTM B 695, Class 50, Type 1.
Match galvanized bolts, tie rods, anchor bolts, and anchor rods with appropriate galvanized nuts for assembly. Ship nuts in the same container consisting of bolts, tie rods, anchor bolts, or anchor rods.
Overtap nuts for galvanized fasteners, galvanized tie rods, galvanized anchor bolts, and galvanized anchor rods according to AASHTO M 291 (ASTM A 563).
Measure the zinc thickness on the wrench flats or top of bolt head of galvanized bolts and on the wrench flats of galvanized nuts.
02560.60(a)  Rotational Capacity Test - In the paragraph that begins "Test all highstrength fasteners…", replace the first sentence with the following sentence:
Test all high-strength fasteners, except highstrength tie rods, highstrength anchor bolts, and highstrength anchor rods, according to Method 1 or 2 below, as applicable.
02560.60(b)  Other Test Requirements - Replace the two paragraphs that begin "Provide three extra high strength bolt assemblies…" and "Provide three extra high strength tie rod and…" with the following two paragraphs:
Provide three highstrength bolt assemblies per size per lot for check testing.
Provide one highstrength tie rod assembly, one highstrength anchor bolt assembly, and one highstrength anchor rod assembly per size per lot for check testing.
SP02910 (2015 Specifications: 04-23-15)

SECTION 02910 - SIGN MATERIALS



(Follow all instructions. If there are no instructions above a subsection, paragraph, sentence, or bullet, then include them in the project. The specifications may be modified to include project specific specifications, but all additions, deletions, or modifications must be sent to the ODOT Technical Resource and Senior Specifications Engineer for review and approval.)
Comply with Section 02910 of the Standard Specifications modified as follows:
02910.33(d)  Nonreflective Black Screened Legend - Replace this subsection, except for the subsection number and title, with the following:
Furnish material for nonreflective black screened legends that is compatible with the sign sheeting, as recommended by the sign sheeting manufacturer.







SECTION 02920 - COMMON ELECTRICAL MATERIALS

Comply with Section 02920 of the Standard Specifications modified as follows:


02920.21(c)  Traffic Signal Circuits  Replace this subsection, except for the subsection number and title, with the following:
On ODOT facilities, color coding of traffic signal circuits shall conform to the wiring color code shown or specified.
On Washington County facilities, the #14 AWG, multi-conductor cables ran for traffic signal circuits shall meet the requirements of IMSA Specification 20-1. Provide color coding of the conductors as shown in Table 02920.21-1.
Table 02920.21-1

Traffic Signal Color Code

#14 AWG IMSA 20-1 Traffic Signal Cable




Function

(Phase)

20 Conductor

[Feed]

10 Conductor

[Branch]

7 Conductor

[Branch]

5 Conductor

[Branch]

4 Conductor

[Branch]

Main Street

Phase Red

Red

Red

Red

Red

Red

Phase Yellow

Orange

Orange

Orange

Orange

Orange

Phase Green

Green

Green

Green

Green

Green

Side Street

Phase Red

Red/Black

Red/Black

Red

Red

Red

Phase Yellow

Orange/Black

Orange

Orange

Orange

Black

Phase Green

Green/Black

Green/Black

Green

Green

Green

Left Turn

Phase Red

Black/Red

White/Black

White/Black

Red

Red

Phase Yellow

White/Red

Black

Black

Orange

Black

Phase Green

Black/White

Blue

Green

Green

Green

Overlap

Phase Red

Red/Green

White/Black

White/Black

Red

Red

Yellow/Flashing Yellow Arrow

Orange/Red

Black

Black

Orange

Black

Phase Green

Blue/Red

Blue

Blue

Green

Green

Main Street

Phase

Don’t Walk



Red/White

Red

Red

Red



Phase Walk

Green/White

Green

Green

Green



Side Street

Phase

Don’t Walk



Black

Red/Black

Red

Red



Phase Walk

Blue/White

Green/Black

Green

Green



Push-Button

Common

White/Black

White/Black

White/Black

Orange



Main Street Phase

Blue

Blue

Blue

Black



Side Street Phase

Blue/Black

Black

Black

Black



Spare

White

White







AC Common

(Branch Only)







White






02920.22  Cable –  The following sentence is added to the end of the list item that begins "Industrial Ethernet Cable":
The cable shall be rated for minimum 300 V.
02920.22  Cable – The following list item is added after the list item that begins "Industrial Ethernet Cable ":
Network Patch Cord – Unshielded Category-6 cable with 24 AWG stranded, bare copper conductors and factory terminated with RJ-45 connectors and strain relief boots.
*****



Download 1.43 Mb.

Share with your friends:
1   ...   30   31   32   33   34   35   36   37   38




The database is protected by copyright ©ininet.org 2024
send message

    Main page