Методическая разработка по развитию навыков технического чтения на английском языке для студентов 2-го курса

DVDs can de double-sided

• 
  each side can have two layers
  
• 
  top layer 4.7GB, bottom layer 3.8GB, total capacity = 17 GB
  
• 
  data transfer rate twice rate of CD-ROM
  

MPEC Video

Explain to your partner with the help of these notes what MPEG Video is and how it operates.
MPEG = method of compressing/decompressing video signals to reduce size by up to 95%

• 
  video sequences stored in series of frames
  
• 
  intraframe (I-frame) every 1/3^rd second has most important picture information
  
• 
  between I-frames are predicted frames (P-frames) and bidirectional frames
  
• 
  (B-frames)
  
• 
  P- and B-frames store changes only
  
• 
  P- and B-frames preserve video quality between I-frames
  
• 
  Human eye can’t detect information discarded
  

A. Find the answers to these questions in the following text.

1. 
   Into what two components is the data stream split?
   
2. 
   What information does an Intra frame contain?
   
3. 
   What is stored in the P-frames following an I-frame?
   
4. 
   What is stored in a P-frame in the case of a bouncing ball?
   
5. 
   What gives the massive reduction in the amount of information needed to reproduce a video sequence?
   
6. 
   Why is a new I-frame used after a few P-frames?
   
7. 
   What is stored in a B-frame?
   
8. 
   Why do B-frames not propagate errors?
   

Following I-frames will be one or more predicted frames (P-frames). The difference between the P-frame and the I-frame it is based on is the only data that is stored for this P-frame. For example, in the case of a bouncing ball, the P picture is stored simple as a description of how the position of the ball has changed from the previous I-frame. This takes up a fraction of the space that would be used if you stored the P-frame as a picture in its own right. Shape or colour changes are also stored in the P-frame. The next P-frame may also be based on this P-frame and so on. Storing differences between the frames gives the massive reduction in the amount of information needed to reproduce the sequence. Only a few P-frames are allowed before a new I-frame is introduced into the sequence as a new reference point, since a small margin of error creeps in with each P-frame.

Between I and P-frames are bi-directional frames (B-frames), based on the nearest I or P-frames both before and after them. In our bouncing ball example, in a B-frame the picture is stored as the difference between the previous I or P-frame and the B-frame and as the difference between the B-frame and the following I or P-frame. To recreate the B-frame when playing back the sequence, the MPEG algorithm uses a combination of two references. There may be a number of B-frames between I or P-frames. No other frame is ever based on a B-frame so they don’t propagate errors like P-frames.

Typically, you will have two or three Bs between Is or Ps, and perhaps three to five P-frames between Is.

1. 
   JPEG is the most common compression system used for video.
   
2. 
   P-frames only store the changes in the image.
   
3. 
   There is always at least one P-frame between two I-frames.
   
4. 
   B-frames store the complete picture information.
   
5. 
   There can only be one B-frame between each I a and P-frame.
   
6. 
   There are typically about four P-frames between each I-frame.
   

2. Match the words in Table A with the statements in Table B.

STARTER

1. Describe the function of these components of a typical network system:
1) a file server 5) a LAN

2) a bridge 6) a gateway

3) a router 7) a modem

4) a backbone

2. Now read these definitions to check your answers. You may also refer to a dictionary.
A bridge is a hardware and software combination used to connect the same type of networks. Bridges can also partition a large network into two smaller ones and connect two LANs that are nearby each other.

A router is a special computer that directs communicating messages when several networks are connected together. High-speed routers can serve as part of the Internet backbone.

A gateway is an interface that enables dissimilar networks to communicate, such as two LANs based on different topologies or network operating systems.

A backbone is the main transmission path, handling the major data traffic, connecting different LANs together.

A LAN is a network contained within a small area, for example a company department.

A modem is a device for converting digital signals to analogue signals and vice versa to enable a computer to transmit and receive data using an ordinary telephone line.

Download 374.28 Kb.

Share with your friends: