• Click
Open.
• In the PuTTY Security Alert window, click
Yes.
•
Enter the admin username and password cisco12345 in the PuTTY window.
• At
the R privileged EXEC prompt, enter the
show users command.
Rb show users What users are connected to router Rat this time
Line User Hosts)
Idle Location 0 con 0 admin idle 00:45:40
*196 vty 0 admin idle 00:00:00 Interface User Mode Idle Peer Address
_____________________________________________________________________________
_______
• Close the PuTTY SSH session window.
• Try to open a Telnet session to your router from PC-A. Were you able to open the Telnet session Explain.
___No.
the Telnet session fails because only SSH
is enabled for the vty lines • Open a PuTTY SSH session to the router from PC-A. Enter the
user01 username and password
user01pass in the PuTTY window to try connecting for user who does not have privilege level of
15.
If you were able to login, what was the prompt Unauthorized access strictly prohibited messege displayed
_____________________________________________________________________________
_______
• Use the
enable command to enter privilege EXEC mode and enter
the enable secret password Share with your friends: