Com 226 comp trouble shooting II theory book


Power-On Self Test (POST)



Download 1.89 Mb.
View original pdf
Page13/140
Date13.01.2021
Size1.89 Mb.
#55619
1   ...   9   10   11   12   13   14   15   16   ...   140
com-226-computer-troubleshooting-ii-theory
Power-On Self Test (POST) The first thing that the BIOS does when it boots the PC is to perform what is called the
Power-On Self-Test, orb POSTb for short. The POST is a builtin diagnostic program that checks the hardware to ensure that everything is present and functioning properly, before the BIOS begins the actual boot. It later continues with additional tests such as the memory test and then it lists any devices that it finds attached to the computer’s internal IDE controllers. (that is seen on the screen of the monitor) as the boot process is proceeding. The POST runs very quickly, and you will normally not even noticed that it is happening- unless it finds a problem. You may have encountered a PC that, when turned on, made beeping sounds and then stopped without booting up. That is the POST telling you

something is wrong with the machine. The speaker is used because this test happens so early on, before the video is activated These beep patterns can be used to diagnose many hardware problems with the PC. The exact patterns depend on the maker of the BIOS the most common are Award and AMI BIOS.

Download 1.89 Mb.

Share with your friends:
1   ...   9   10   11   12   13   14   15   16   ...   140




The database is protected by copyright ©ininet.org 2024
send message

    Main page