Com 226 comp trouble shooting II theory book



Download 1.89 Mb.
View original pdf
Page130/140
Date13.01.2021
Size1.89 Mb.
#55619
1   ...   126   127   128   129   130   131   132   133   ...   140
com-226-computer-troubleshooting-ii-theory
274 Conflict Troubleshooting

Step 8: Only one conflict is listed Look fora resource setting that doesn’t conflict
1. In the Resource settings box, double-click the icon next to the resource setting that is conflicting. If you see a message that says You must clear the Use Automatic Settings box before you can change a resource setting click OK to close the message, and then clear the Use automatic settings box.
2. Scroll through the available resource settings.
3. For each setting, look at the Conflicting device list box to see if it conflicts with any other hardware.
4. If you find a free setting, click OK. Did you find a setting that doesn’t conflict with any other hardware
- If you can find a setting which does not conflict, go to Step 13.
- If you cannot find a setting that does not conflict, go to Step 14.
- If you see a message stating that the resource setting cannot be modified, go to Step 1 Step 9: No conflicts are listed If there are no conflicts listed in the Conflicting device list
box, either you are not viewing resources for the correct device, or the conflict has already been resolved (you need to restart your computer to allow Windows 95 to configure the hardware. Look at the top of the dialog box to see if you are viewing resources for the correct device.

There is no further solution to this problem. If restarting Windows 95 does not clear the problem, you might simply need to remove the conflicting device. Step 10: The device is conflicting Now you need to identify which hardware is conflicting
1. Click Set configuration manually.
2. In the Conflicting device list box, identify the other hardware that is using the conflicting resources. Is more than one resource conflict listed
- If more than one resource conflict is listed, go to Step 16.
- If only one resource conflict is listed, go to Step 17.
- If no conflicts are listed, go to Step 9. Step 11: Only one device is conflicting Do you want to disable the device that is causing all the conflicts
- If you wish to disable the conflicting device, go to Step 18.
- If you must use the hardware that is causing the conflicts, go to Step 17. Step 12: More than one device is conflicting Look for resource settings that don’t conflict
1. In the Resource settings box, double-click the icon next to a resource setting that is conflicting. If you see a message that says You must clear the Use Automatic Settings box



Download 1.89 Mb.

Share with your friends:
1   ...   126   127   128   129   130   131   132   133   ...   140




The database is protected by copyright ©ininet.org 2024
send message

    Main page