Example of Using the scif in Asynchronous Mode

Download 157.27 Kb.

View original pdf

Page	3/25
Date	22.01.2021
Size	157.27 Kb.
	#55672

1 2 3 4 5 6 7 8 9 ... 25

example-of-using-the-scif-in-asynchronous-mode
stm32-stm8 embedded software solutions, stm32-stm8 embedded software solutions, stm32-stm8 embedded software solutions, Обзор Bluetooth, лекция 9

Figure 1 Example of Connection for SCIF (Asynchronous Mode) Operation SH7780 Group

SH7780 Group

Example of Using the SCIF in Asynchronous Mode (Serial Data Transfer)

REJ06B0717-0100/Rev.1.00 March 2008 Page 2 of 25
1. Preface
1.1 Specification
SCIF channel 0 is used in asynchronous mode to transfer data. Data received by the connected device are sent back after reception is completed. An overview of the communication is given below and a connection example is shown in figure 1.
• Bit rate 115200 bps
• Format bit data length, parity bit added, 1 stop bit
SH7780
Connected unit
SCIF0_RXD
ch-0 receive data pin
TXD
Transmit data pin
RXD
Receive data pin
SCIF0_TXD
ch-0 transmit data pin
Figure 1 Example of Connection for SCIF (Asynchronous Mode) Operation

SH7780 Group

Example of Using the SCIF in Asynchronous Mode (Serial Data Transfer)

Download 157.27 Kb.

Share with your friends:

1 2 3 4 5 6 7 8 9 ... 25