Type 10BaseT Installation (Twisted Pairs) The TSM termination unit has an RJ-45 eight-pin socket for Type 10BaseT cable. The cable has a mating RJ-45 type eight-pin modular plug. To install. Insert the modular plug atone end of the interface cable into the RJ-45 connector (P) on the TSM termination unit. Attach the other end of the cable to an input port of a 10BaseT concentrator. Type Base Installation (Thin Ethernet) The TSM termination unit has a BNC connector for Type 10Base2 cable. This connection requires a T-connector. Figure 3-4. INOSM01 Cable Diagram (Page 1 of 2) P4 P1 P3 P2 TO KEYBOARD P1 P2 P1 P3 P3 P2 P4 P5 P5 P6 HARD DISK DRIVE P8A P8B 1 1 1 1 1 1 1 FLOPPY DISK DRIVE INDDM01 INSCS01 INESM01 TO MAU TRANSCEIVER FOR THICK ETHERNET CABLE THIN ETHERNET CABLE TWISTED PAIRS NETWORK CABLE J1 J2 J3 P1 P3 VIDEO ADAPTER SCSI ADAPTER TO MONITOR 1949283_650 CABLE INCLUDED WITH INSCS01 MODULE P11 P4 P5 P3 P8 P9 P2 P1 P10 P7 P6 F1 P13 P12 E2 C OM E 1 NTSM01 TO P ON IMMPI01 MODULE CABLES INCLUDED WITH INDDM01 MODULE 1948752 1050 CABLE INCLUDED WITH INOSM01 MANAGER VDC NKSM01 NKSM11 T00577A POWER CONNECTION 1949 186 3
