Open Systems Manager (Front Cover)
Download 0.88 Mb. View original pdf
|
| SHUTDOWN PROCEDURE in Section 4 to shutdown the INESM01 module. Push and turn the two front panel captive retaining latches ½-turn to unlatch the module. It is unlatched when the slots on the latches are vertical and the open end of the slots faces away from the module. Slide the module out of its module mounting unit back- plane connector so that power is removed from the module. Remove the J connector of the NKSM01 or NKSM11 cable from the module mounting unit backplane. 5. Remove the J and J connectors of the NKSM01 or NKSM11 cable from the P and P connectors on the NTSM01 termination unit. Connect the J connector of the NKSM01 or NKSM11 cable to the P connector on the NTSM01 termination unit. Connect the J connector of the NKSM01 or NKSM11 cable to the P connector on the NTSM01 termination unit. Connect the J connector of the NKSM01 or NKSM11 cable to the backplane of the module mounting unit assigned to the INESM01 module. Fully insert the INESM01 module into its module mounting unit and turn the captive latches turn to lock the module in place. Download 0.88 Mb. Share with your friends:
|