A smart Internet of Things (IoT) enabled System for Home Energy Management, Control and Automation


Project Documentation and Presentation



Download 0.89 Mb.
View original pdf
Page12/14
Date30.06.2023
Size0.89 Mb.
#61624
1   ...   6   7   8   9   10   11   12   13   14
Project Proposal 19U18212PSA 19U0479
3.1.6 Project Documentation and Presentation

At this stage we shall prepare project documentation inform of a Final Year Project Report. Prepare a presentation for the project. Present the project to the instructor and/or class.


15
3.2 Expected Outcomes
Here are some expected outcomes the system should be able to perform in the test and evaluation phase

Accurate measurement of energy consumption: The system should be able to accurately measure the energy consumption of different devices in the house. The measurements should be consistent and reliable.

Real-time monitoring: The system should be able to provide real-time feedback on energy consumption to the user. This will allow the user to identify which devices are using the most energy and take steps to reduce their usage.

Control over energy usage: The system should be able to control the energy usage of different devices in the house. This may include turning off devices when they are not in use.

User-friendly interface: The system should have a user-friendly interface that is easy to use and understand. This will help ensure that the user can take full advantage of the system's capabilities.

Reliable performance: The system should be reliable and perform consistently overtime. It should be able to handle changes in the user's energy consumption patterns and adapt accordingly.

Safety: The system should be designed and implemented with safety in mind. It should not pose any safety hazards to the user or the house.
3.3 Work Plan
Task
Duration
Start Date
End Date
Project planning and research
3 weeks
05/12/2022 26/12/2022 Design and prototyping of the system
6 weeks
27/12/2022 07/02/2023 Programming the Arduino microcontroller
3 weeks
08/02/2023 01/03/2023 Integration of sensors and actuators
2 weeks
02/03/2023 16/03/2023 Testing and debugging the system
3 weeks
17/03/2023 07/04/2023 User interface design and implementation
4 weeks
17/03/2023 14/04/2023 Final system integration and testing
3 weeks
08/04/2023 29/04/2023 Project documentation and presentation
2 weeks
30/04/2023 14/05/2023
Table 1 Work plan of the project


16
Figure 8 Gantt chart of the project

Download 0.89 Mb.

Share with your friends:
1   ...   6   7   8   9   10   11   12   13   14




The database is protected by copyright ©ininet.org 2024
send message

    Main page