QSB13: METAL RAW MATERIAL SPECIAL REQUIREMENTS

QSB15: CERTIFICATION OF MATERIAL CONFORMANCE

1. 
   From materials furnished by ATK and utilized for manufacture and test.
   
2. 
   From materials for which the Supplier has specific data or other objective evidence of conformance to applicable specifications available for examination.
   

The certificate must contain the signature and title of an authorized representative of the Supplier.

A sample of raw material, heat treated to the condition of the part delivered to ATK, of a suitable size for hardness and composition testing is required with each shipment.

The following documentation shall be included:

1. 
   Certification of raw materials and/or processes. All certifications shall include traceability to the ATK part number, purchase agreement number, and purchase agreement line item (e.g. job number, lot number, heat treat number).
   
2. 
   Supplier's shipper/receiver for raw materials and /or processes referencing the ATK purchase agreement number.
   
3. 
   Origin of raw materials, traceable to the ATK purchase agreement number,part number, and lot number.
   
4. 
   Lot/date code, heat and batch number traceable to the ATK purchase agreement number, part number, and lot number.
   
5. 
   Process certifications and test reports traceable to the ATK purchase agreement number, part number, and lot number.
   
6. 
   Sample of raw material. Sample shall be labeled with the following:
   
   1. 
      ATK purchase agreement, purchase agreement line item, and ATK part number.
      
   2. 
      Material part number (e.g. Al Alloy 7075-T73, Al Alloy 6061-T6, TI-6AL-4V).
      
   3. 
      If the purchase agreement requires the part to be heat treated, two samples are required: one shall be of the raw material and the other shall be from the heat treated material.
      

QSB16: FUNCTIONAL TEST REPORTS

Functional test reports shall be submitted. All functional test reports shall reference the purchase agreement number, the Supplier’s name and address, and the independent laboratory’s name and address, if applicable. The part number, serial or lot number, date and run time (if applicable), and a summary of the test results shall accompany each shipment. An authorized Supplier representative, either by a dated inspection stamp or signature, date, and title shall validate all test reports. A typed name submitted by the Supplier is a legally acceptable substitute. NOTE: Functional tests include, but are not limited to: static, vibration, acoustic, thermal cycle, electronic, and hydraulic.

QSB17: DIMENSIONAL INSPECTION REPORT

The Supplier shall submit dimensional inspection acceptance data, identifiable to the item supplied, with each shipment. The data shall include the sampling plan (if applicable), actual dimensions, and quantities inspected, accepted, and rejected. Unless otherwise specified, 100% inspection of all materials, notes, and features is required on all items. The sampling plan, if approved by ATK, shall be specified in the purchase order line item detail notes.

QSB18: CHEMICAL, PHYSICAL, AND/OR MECHANICAL TEST REPORTS

One copy of test reports indicating chemical composition, physical, and/or mechanical properties including actual test data/results identifiable to each lot, batch, or heat treat lot shall accompany each shipment of material. Test data shall include actual values obtained from testing of the submitted material (lot). Test methods used shall agree with the methods stated in the specification or drawing. An authorized Supplier representative (including sub-tier supplier representatives), either by a dated inspection stamp or signature, date, and title, shall validate all test reports. A typed name submitted by the Supplier is a legally acceptable substitute. For electrical or RF wire and cable, the report shall include electrical inspections and tests in accordance with the applicable specifications. The manufacturer name and lot number of materials must be identified on each document.

QSB19: MATERIAL CERTIFICATIONS

The Supplier shall submit a certificate of conformance (C of C) for all raw materials purchased from a sub-tier supplier and used in items delivered to ATK. Specific requirements shall be included in the purchase agreement line item detail notes.

QSB20: WEIGHT REPORT

The Supplier shall submit a weight report for each item. Traceability shall be maintained to all part numbers, serial or lot numbers, materials designations, and any other specified data or information.

QSB21: MANUFACTURING LOCATION

The Supplier shall include the location of the item manufacturer in the acceptance documentation.

QSB22: MANUFACTURER CAGE CODE

The Supplier shall include the Commercial and Government Entity (CAGE) code of the item manufacturer in the acceptance documentation.

Directory: suppliers -> atk -> files
suppliers -> Dfars clauses
files -> Alliant Techsystems Inc. General Terms and Conditions
files -> Alliant techsystems inc., Tactical systems division offeror representations and certifications
suppliers -> Network Penetration Reporting and Contracting for Cloud Services

Download 242.99 Kb.

Share with your friends: