150.235 I-1 DISTRICT - LIGHT INDUSTRIAL/HIGH-TECH/HEAVY COMMERCIAL DISTRICT
PURPOSE
The I-1 Light Industrial/High-Tech/Heavy Commercial District is intended to provide areas for light industrial, high-tech, and heavy commercial uses without creating adverse effects on the surrounding land use. Industrial activities shall occur wholly within a building and storage of all material shall be stored within a building or an area that is screened by a wall or fence, with exceptions for storage of commercial product sales displays or items for sale.
All permitted principal uses in a C-2 District.
Heavy Commercial and light industrial uses including but not limited to the following:
Heavy Commercial permitted uses;
Bottling works to include craft/artisan breweries and distilleries, small scale breweries, but excluding large scale breweries and distilleries
Building material sales yard, excluding concrete mixing
Road or building contractor's equipment storage building or yard
Sales and rental of road or building contractor's equipment
Draying, freighting or trucking yard or terminal
Fuel yard including bulk storage of petroleum products for local distribution, as distinguished from a petroleum products terminal for extensive storage and regional distribution purposes
Ice manufacture or cold storage
Experimental or testing laboratory
Printing plant
Warehousing, wholesale merchandise
Storage, excluding auto wrecking, junk or scrap materials
Wholesale food market
Vehicle storage yard
Light Industrial Permitted Uses;
Assembly
Manufacturing, Light
Steel product manufacturing, low impact
Steel plating
Fabricating
High technology manufacturing
Research and development center
Distribution center
Spur railroad tracks
Food production/processing
Agricultural Permitted Uses;
Agricultural businesses
Agricultural crop production
Chick hatchery
Feed or grain storage, liquid fertilizer storage
Poultry dressing
Processing of agricultural product
Institutional Uses
Public utility service yard
Electrical switching or transforming station
Government operation (non-office)
Recycling collection point
Uses Compliance
Uses within this District shall comply with the following:
Effluents
The emission of smoke, particulate matter, noxious or toxic gases or other effluents shall conform to the standards and regulations of state and federal agencies, as well as other requirements imposed by law.
Dust
No dust of any kind produced by an industrial operation is permitted to escape beyond the confines of the building in which it is produced; and all walks, driveways and parking areas shall be dust-proofed.
Odor
No noxious odor produced by an industrial operation shall be permitted to extend beyond the lot lines. These industries shall present detailed plans for the elimination of noxious odors before a permit will be granted.
Glare
No glare from all on-site lighting may be seen from any street or any RE, R-1, R-2, R-3, MH, OS, C-1, C-2, DFB-C, DFB-T, and DFB-B Districts.
Heat
Produce no heat humanly perceptible at or beyond the lot boundaries.
Noise
The noise level produced within the building shall not be disruptive beyond the lot boundaries.
150.236 I-2 DISTRICT - HEAVY INDUSTRIAL DISTRICT
PURPOSE
The I-2 Heavy Industrial District is intended to establish and preserve areas for industrial and related uses of such a nature that do not create serious problems of compatibility with other land uses, and to make provision for certain commercial uses which are most appropriately located as neighbors of industrial uses or which provide necessary services to the people in these areas.
PERMITTED PRINCIPAL USES
Any I-1 permitted principal use
Rendering Plant
Processing of hazardous products
Steel product manufacturing, high impact
Recycling
Junkyards
All I-2 permitted uses including; Fabricating, wholesaling, assembly, manufacturing, warehousing, bulk storage and processing industries shall conform to the following requirements:
Enclosed buildings
All operations are conducted within enclosed buildings, and all materials and products are stored within enclosed buildings or are effectively screened by a wall or fence not less than six feet high.
Minimum distance
The minimum distance between any boundary line of an RE, R-1, R-2, R-3, MH, OS, C-1, or C-2 District and an I-2 building or structure is 50 feet; an I-2 parking area used by passenger vehicles is 15 feet; and an I-2 driveway, parking area or loading dock used by trucks, tractors, semi-trailers, or trailers is 150 feet.
Effluents
The emission of smoke, particulate matter, noxious or toxic gases or other effluents shall conform to the standards and regulations of state and federal agencies, as well as other requirements imposed by law.
Dust
No dust of any kind produced by an industrial operation is permitted to escape beyond the confines of the building in which it is produced and all walks, driveways and parking areas shall be dust-proofed.
Odor
No noxious odor produced by an industrial operation shall be permitted to extend beyond the lot lines. These industries shall present detailed plans for the elimination of noxious odors before a permit will be granted.
Glare
No glare from all on-site lighting may be seen from any street or any RE, R-1, R-2, R-3, MH, OS, C-1, C-2, DFB-C, DFB-T, and DFB-B Districts.
Heat
Produce no heat humanly perceptible at or beyond the lot boundaries
Noise
The noise level produced within the building shall not be disruptive beyond the lot boundaries.
Share with your friends: |