Sip firmware Release 1 for ip phone 1140e administration


Table 35Device ID configuration



Download 1.47 Mb.
View original pdf
Page60/76
Date14.08.2023
Size1.47 Mb.
#61855
1   ...   56   57   58   59   60   61   62   63   ...   76
NN43113-300 02.05 1140E Adm
Table 35
Device ID configuration
Device ID :
XXXXXXXXX

Password: Enter the Password used by the provisioning server for authentication of the IP Phone E. Note TFTP does not require a Password. FTP and HTTP do require a password.
Table 36
Password configuration
Password :
XXXXXXXXX
19
Configure the PVQMon IP address.
If this server is available on the network, enter the PVQMon IP
address.
Table 37
PVQMon IP configuration
PVQMon IP :
0. 0. 0. SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks

Configure the device settings
95
20
Configure the NAT Traversal Method. Use one of the following methods to traverse Network Address Translation (NAT) devices for the IP Phone E with SIP Firmware.
The next five tables show menu items in the Device Settings menu that apply to configuring the NAT Traversal Method.

NAT Signal
Select either None, SIPPING, or STUN to define the NAT
traversal mode for SIP signaling.
Table 38
NAT Signal configuration
NAT Traversal
NAT Signal :
STUN
None
SIP Ping
STUN

NAT Media
Select either None or STUN to define NAT traversal mode for signaling.
Table 39
NAT media configuration
STUN
None
NAT Media :
STUN

NAT TTL:
Enter the Time to Live (TTL) in seconds for the NAT traversal.
Table 40
NAT TTL configuration
NAT TTL :
000

STUN SIP Enter an IP address for the STUNS IP device.
SIP Firmware Release 1.1 for IP Phone E Administration
NN43113-300 Standard May Copyright © 2008, Nortel Networks



Download 1.47 Mb.

Share with your friends:
1   ...   56   57   58   59   60   61   62   63   ...   76




The database is protected by copyright ©ininet.org 2024
send message

    Main page