2. section (Continued) 6 Call Layer 3 Processing
Download 1.98 Mb.
|
- Navigate this page:
- 2.6.4.1.2.2 Service Subfunctions
2.6.4.1.2.1 Use of Variables2.6.4.1.2.1.1 Maintaining the Service Request Sequence Number The mobile station shall maintain a service request sequence number variable, SERV_REQ_NUMs for use with service negotiation. Upon entering the Mobile Station Control on the Traffic Channel State, the mobile station shall set SERV_REQ_NUMs to 0. Each time the mobile station sends a new Service Request Message, it shall set the SERV_REQ_SEQ field of the message to the current value of SERV_REQ_NUMs, and shall then set SERV_REQ_NUMs equal to (SERV_REQ_NUMs + 1) modulo 8. 2.6.4.1.2.1.2 Maintaining the Service Negotiation Indicator Variable The mobile station shall maintain a service negotiation indicator variable, SERV_NEGs, to indicate which type of negotiation to use, either service negotiation or service option negotiation. The mobile station shall set SERV_NEGs to enabled whenever service negotiation is to be used, and shall set SERV_NEGs to disabled whenever service option negotiation is to be used. The precise rules for setting SERV_NEGs are specified in 2.6.4.2 and 2.6.6.2.5.1. For CDMA operation in Band Class 1, the mobile station shall set SERV_NEGs to enabled. 2.6.4.1.2.1.3 Maintaining the Service Option Request Number The mobile station shall maintain a service option request number variable, SO_REQs, for use with service option negotiation. The mobile station shall set SO_REQs to a special value, NULL, if the mobile station does not have an outstanding service option request. If the mobile station has an outstanding service option request, the mobile station shall set SO_REQs to the number of the service option associated with the outstanding request.
• Normal Service Subfunction - While this subfunction is active, the mobile station processes service configuration requests from the user and from the base station. • Waiting for Service Request Message Subfunction - While this subfunction is active, the mobile station waits to receive a Service Request Message. • Waiting for Service Response Message Subfunction - While this subfunction is active, the mobile station waits to receive a Service Response Message. • Waiting for Service Connect Message Subfunction - While this subfunction is active, the mobile station waits to receive a Service Connect Message, a General Handoff Direction Message, or a Universal Handoff Direction Message containing a service configuration record. • Waiting for Service Action Time Subfunction - While this subfunction is active, the mobile station waits for the action time associated with a new service configuration and then sends a Service Connect Completion Message. • SO Negotiation Subfunction - While this subfunction is active, the mobile station supports service option negotiation with the base station. This subfunction is only used while operating in Band Class 0. The SO Negotiation Subfunction supports service option negotiation. All of the other service subfunctions support service negotiation. At any given time during Traffic Channel operation, only one of the service subfunctions is active. For example, when the mobile station first enters the Traffic Channel Initialization Substate of the Mobile Station Control on the Traffic Channel State, the Normal Service Subfunction, the Waiting for Service Connect Message Subfunction or the SO Negotiation Subfunction is active. Each of the other service subfunctions may become active in response to various events which occur during the Traffic Channel substates. Typically, the mobile station processes events pertaining to service configuration and negotiation in accordance with the requirements for the active service subfunction, however, some Traffic Channel substates do not allow for the processing of certain events pertaining to service configuration and negotiation, or specify requirements for processing such events which supersede the requirements of the active service subfunction.
2.6.4.1.2.2.1 Normal Service Subfunction While this subfunction is active, the mobile station processes service configuration requests from the user and from the base station. While the Normal Service Subfunction is active, the mobile station shall perform the following: • The mobile station shall process Forward and Reverse Traffic Channel frames in accordance with the current service configuration. The mobile station shall discard any Forward Traffic Channel frame which has a format that is not supported by the mobile station. The mobile station may discard any type of Forward Traffic Channel traffic that is not signaling traffic and is not part of the current service configuration. • To initiate service negotiation for a new service configuration, the mobile station shall send a Service Request Message to propose the new service configuration. The mobile station shall activate the Waiting for Service Response Message Subfunction. • For any service option connection that is part of the current service configuration, the mobile station may send a Service Option Control Message to invoke a service option specific function in accordance with the requirements for the associated service option. • If SERV_NEGs changes from enabled to disabled (see 2.6.6.2.5.1), the mobile station shall activate the SO Negotiation Subfunction. • If the mobile station receives one of the following service negotiation messages, the mobile station shall process the message according to the specified requirements: 1. Service Connect Message: If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds. 2. Service Option Control Message: If the service option connection specified by the message is part of the current service configuration, and the service option specified by the message is the same as the service option associated with the service option connection, the mobile station shall interpret the action time of the message as specified in 2.6.4.1.5, and shall process the message in accordance with the requirements for the service option; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds. 3. Service Request Message: The mobile station shall process the message as follows:
– If the purpose of the message is to reject a proposed service configuration, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000010’) within T56m seconds. – If the purpose of the message is to propose a service configuration, the mobile station shall process the message as follows: + If the mobile station accepts the proposed service configuration, the mobile station shall send a Service Response Message to accept the proposed service configuration within T59m seconds. The mobile station shall activate the Waiting for Service Connect Message Subfunction. + If the mobile station does not accept the proposed service configuration and does not have an alternative service configuration to propose, the mobile station shall send a Service Response Message to reject the proposed service configuration within T59m seconds. + If the mobile station does not accept the proposed service configuration and has an alternative service configuration to propose, the mobile station shall send a Service Response Message to propose the alternative service configuration within T59m seconds. The mobile station shall activate the Waiting for Service Request Message Subfunction.
If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds. 6. Universal Handoff Direction Message: If the SERVICE_INCLUDED field is included in this message and is set to ‘1’: If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds. • If the mobile station receives one of the following service option negotiation messages, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000010’) within T56m seconds: 1. Service Option Request Order 2. Service Option Response Order 3. Service Option Control Order
2.6.4.1.2.2.2 Waiting for Service Request Message Subfunction While this subfunction is active, the mobile station waits to receive a Service Request Message. Upon activation of the Waiting for Service Request Message Subfunction, the mobile station shall set the subfunction timer for T68m seconds. While the Waiting for Service Request Message Subfunction is active, the mobile station shall perform the following: • If the subfunction timer expires, the mobile station shall activate the Normal Service Subfunction. • The mobile station shall process Forward and Reverse Traffic Channel frames in accordance with the current service configuration. The mobile station shall discard any Forward Traffic Channel frame which has a format that is not supported by the mobile station. The mobile station may discard any type of Forward Traffic Channel traffic that is not signaling traffic and is not part of the current service configuration. • The mobile station shall not initiate service negotiation for a new service configuration. • For any service option connection that is part of the current service configuration, the mobile station may send a Service Option Control Message to invoke a service option specific function in accordance with the requirements for the associated service option. • If SERV_NEGs changes from enabled to disabled (see 2.6.6.2.5.1), the mobile station shall activate the SO Negotiation Subfunction. • If the mobile station receives one of the following service negotiation messages, the mobile station shall process the message according to the specified requirements: 1. Service Connect Message: If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds and shall activate the Normal Service Subfunction. 2. Service Option Control Message: If the service option connection specified by the message is part of the current service configuration, and the service option specified by the message is the same as the service option associated with the service option connection, the mobile station shall interpret the action time of the message as specified in 2.6.4.1.5, and shall process the message in accordance with the requirements for the service option; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds. 3. Service Request Message: The mobile station shall process the message as follows:
+ If the mobile station accepts the proposed service configuration, the mobile station shall send a Service Response Message to accept the proposed service configuration within T59m seconds. The mobile station shall activate the Waiting for Service Connect Message Subfunction. + If the mobile station does not accept the proposed service configuration and does not have an alternative service configuration to propose, the mobile station shall send a Service Response Message to reject the proposed service configuration within T59m seconds. The mobile station shall activate the Normal Service Subfunction. + If the mobile station does not accept the proposed service configuration and has an alternative service configuration to propose, the mobile station shall send a Service Response Message to propose the alternative service configuration within T59m seconds. The mobile station shall reset the subfunction timer for T68m seconds.
4. Service Response Message: The mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000010’) within T56m seconds. 5. General Handoff Direction Message: If the SERVICE_INCLUDED field is included in this message and is set to ‘1’: If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds, and shall activate the Normal Service Subfunction. 6. Universal Handoff Direction Message: If the SERVICE_INCLUDED field is included in this message and is set to ‘1’: If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds and shall activate the Normal Service Subfunction.
• If the mobile station receives one of the following service option negotiation messages, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000010’) within T56m seconds: 1. Service Option Request Order 2. Service Option Response Order 3. Service Option Control Order
2.6.4.1.2.2.3 Waiting for Service Response Message Subfunction While this subfunction is active, the mobile station waits to receive a Service Response Message. Upon activation of the Waiting for Service Response Message Subfunction, the mobile station shall set the subfunction timer for T68m seconds. While the Waiting for Service Response Message Subfunction is active, the mobile station shall perform the following: • If the subfunction timer expires, the mobile station shall activate the Normal Service Subfunction. • The mobile station shall process Forward and Reverse Traffic Channel frames in accordance with the current service configuration. The mobile station shall discard any Forward Traffic Channel frame which has a format that is not supported by the mobile station. The mobile station may discard any type of Forward Traffic Channel traffic that is not signaling traffic and is not part of the current service configuration. • The mobile station shall not initiate service negotiation for a new service configuration. • For any service option connection that is part of the current service configuration, the mobile station may send a Service Option Control Message to invoke a service option specific function in accordance with the requirements for the associated service option. • If SERV_NEGs changes from enabled to disabled (see 2.6.6.2.5.1), the mobile station shall activate the SO Negotiation Subfunction. • If the mobile station receives one of the following service negotiation messages, the mobile station shall process the message according to the specified requirements:
If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds and shall activate the Normal Service Subfunction.
– If the purpose of the message is to reject a proposed service configuration, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000010’) within T56m seconds.
+ If the mobile station accepts the proposed service configuration, the mobile station shall send a Service Response Message to accept the proposed service configuration within T59m seconds. The mobile station shall activate the Waiting for Service Connect Message Subfunction. + If the mobile station does not accept the proposed service configuration and does not have an alternative service configuration to propose, the mobile station shall send a Service Response Message to reject the proposed service configuration within T59m seconds. The mobile station shall activate the Normal Service Subfunction. + If the mobile station does not accept the proposed service configuration and has an alternative service configuration to propose, the mobile station shall send a Service Response Message to propose the alternative service configuration within T59m seconds. The mobile station shall activate the Waiting for Service Request Message Subfunction.
4. Service Response Message: The mobile station shall process the message as follows: – If the service request sequence number (SERV_REQ_SEQr) from the message does not match the sequence number of the Service Request Message for which the mobile station is expecting a response, the mobile station shall not process the other layer 3 fields of the message. – If the purpose of the message is to reject the service configuration proposed in the corresponding Service Request Message, the mobile station shall activate the Normal Service Subfunction. The mobile station may indicate to the user that the requested service configuration has been rejected.
+ If the mobile station accepts the proposed service configuration, the mobile station shall send a Service Request Message to accept the proposed service configuration within T59m seconds. The mobile station shall activate the Waiting for Service Connect Message Subfunction. + If the mobile station does not accept the proposed service configuration and does not have an alternative service configuration to propose, the mobile station shall send a Service Request Message to reject the proposed service configuration within T59m seconds. The mobile station shall activate the Normal Service Subfunction. + If the mobile station does not accept the proposed service configuration and has an alternative service configuration to propose, the mobile station shall send a Service Request Message to propose the alternative service configuration within T59m seconds. The mobile station shall reset the subfunction timer for T68m seconds.
If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds and shall activate the Normal Service Subfunction.
If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = '00000111') within T56m seconds and shall activate the Normal Service Subfunction. • If the mobile station receives one of the following service option negotiation messages, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000010’) within T56m seconds:
1. Service Option Request Order 2. Service Option Response Order 3. Service Option Control Order
2.6.4.1.2.2.4 Waiting for Service Connect Message Subfunction While this subfunction is active, the mobile station waits to receive a Service Connect Message. Upon activation of the Waiting for Service Connect Message Subfunction, the mobile station shall set the subfunction timer for T65m seconds. While the Waiting for Service Connect Message Subfunction is active, the mobile station shall perform the following: • If the subfunction timer expires, the mobile station shall activate the Normal Service Subfunction. • The mobile station shall process Forward and Reverse Traffic Channel frames in accordance with the current service configuration. The mobile station shall discard any Forward Traffic Channel frame which has a format that is not supported by the mobile station. The mobile station may discard any type of Forward Traffic Channel traffic that is not signaling traffic and is not part of the current service configuration. • The mobile station shall not initiate service negotiation for a new service configuration. • For any service option connection that is part of the current service configuration, the mobile station may send a Service Option Control Message to invoke a service option specific function in accordance with the requirements for the associated service option. • If SERV_NEGs changes from enabled to disabled (see 2.6.6.2.5.1), the mobile station shall activate the SO Negotiation Subfunction. • If the mobile station receives one of the following service negotiation messages, the mobile station shall process the message according to the specified requirements:
If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds and shall activate the Normal Service Subfunction.
3. Service Request Message: The mobile station shall process the message as follows: – If the purpose of the message is to reject a proposed service configuration, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000010’) within T56m seconds.
+ If the mobile station accepts the proposed service configuration, the mobile station shall send a Service Response Message to accept the proposed service configuration within T59m seconds. The mobile station shall reset the subfunction timer for T65m seconds. + If the mobile station does not accept the proposed service configuration and does not have an alternative service configuration to propose, the mobile station shall send a Service Response Message to reject the proposed service configuration within T59m seconds. The mobile station shall activate the Normal Service Subfunction. + If the mobile station does not accept the proposed service configuration and has an alternative service configuration to propose, the mobile station shall send a Service Response Message to propose the alternative service configuration within T59m seconds. The mobile station shall activate the Waiting for Service Request Message Subfunction.
If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds and shall activate the Normal Service Subfunction.
If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall activate the Waiting for Service Action Time Subfunction; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds and shall activate the Normal Service Subfunction. • If the mobile station receives one of the following service option negotiation messages, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000010’) within T56m seconds:
1. Service Option Request Order 2. Service Option Response Order 3. Service Option Control Order
2.6.4.1.2.2.5 Waiting for Service Action Time Subfunction While this subfunction is active, the mobile station waits for the action time associated with a new service configuration. If the action time was specified by a Service Connect Message, the mobile station shall send the Service Connect Completion Message at the action time. While the Wait for Service Action Time Subfunction is active, the mobile station shall perform the following: • Prior to the action time associated with the Service Connect Message, General Handoff Direction Message, or Universal Handoff Direction Message containing a service configuration record, the mobile station shall process Forward and Reverse Traffic Channel frames in accordance with the current service configuration. The mobile station shall discard any Forward Traffic Channel frame which has a format that is not supported by the mobile station. The mobile station may discard any type of Forward Traffic Channel traffic that is not signaling traffic and is not part of the current service configuration. • At the action time associated with the Service Connect Message, General Handoff Direction Message or Universal Handoff Direction Message containing a service configuration record, the mobile station shall process the received Service Configuration Record as specified in 2.6.4.1.14, shall process the received Non-negotiable Service Configuration Record as specified in 2.6.4.1.15, and shall begin to use the service configuration specified by the Service Connect Message, General Handoff Direction Message or Universal Handoff Direction Message containing a service configuration record as the current service configuration and shall begin to process Forward and Reverse Traffic Channel frames accordingly. If the action time was specified by a Service Connect Message, the mobile station shall send a Service Connect Completion Message within T56m seconds after the action time. The mobile station shall exit this subfunction and activate the Normal Service Subfunction. • The mobile station shall not initiate service negotiation for a new service configuration. • For any service option connection that is part of the current or pending service configuration, the mobile station may send a Service Option Control Message to invoke a service option specific function in accordance with the requirements for the associated service option. • If SERV_NEGs changes from enabled to disabled (see 2.6.6.2.5.1), the mobile station shall activate the SO Negotiation Subfunction. • If the mobile station receives one of the following service negotiation messages, the mobile station shall process the message according to the specified requirements:
If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall remain in this subfunction until the action time specified in the message, and shall begin to use the service configuration specified by the General Handoff Direction Message at the action time; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds.
If Resource Control is supported, the mobile station shall process this message as specified in 2.6.4.1.13; otherwise, the mobile station shall perform the following: If the mobile station accepts the service configuration specified in the message, the mobile station shall remain in this subfunction until the action time specified in the message, and shall begin to use the service configuration specified by the Universal Handoff Direction Message at the action time; otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000111’) within T56m seconds. • If the mobile station receives one of the following service option negotiation messages, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000010’) within T56m seconds:
1. Service Option Request Order 2. Service Option Response Order 3. Service Option Control Order
2.6.4.1.2.2.6 SO Negotiation Subfunction The SO Negotiation Subfunction is only supported for mobile stations operating in Band Class 0. Upon activation of the SO Negotiation Subfunction, the mobile station shall delete from the current service configuration any service option connection which does not use primary traffic on both the Forward and Reverse Traffic Channels. While the SO Negotiation Subfunction is active, the mobile station shall perform the following: • If the current service configuration includes a service option connection, the mobile station shall process the received primary traffic bits in accordance with the requirements for the service option associated with the service option connection; otherwise, the mobile station shall discard the received primary traffic bits. • If the current service configuration includes a service option connection, the mobile station shall transmit primary traffic bits in accordance with the requirements for the service option associated with the service option connection; otherwise, the mobile station shall transmit null traffic on the Reverse Fundamental Channel, if the Fundamental Channel is present or transmit power control bits on the Reverse Pilot Channel, if only the Dedicated Control Channel is present. • If the current service configuration includes a service option connection, the mobile station may send a Service Option Control Order to invoke a service option specific function in accordance with the requirements for the service option associated with the service option connection. • To initiate service option negotiation, the mobile station shall set SO_REQs to the number of the requested service option and shall send a Service Option Request Order containing the requested service option number. • If SERV_NEGs changes from disabled to enabled (see 2.6.6.2.5.1), the mobile station shall set SO_REQs to NULL and shall activate the Normal Service Subfunction. • If the mobile station receives a Service Option Request Order, it shall process the order as follows: – If the mobile station accepts the requested service option, the mobile station shall set SO_REQs to NULL and shall send a Service Option Response Order accepting the requested service option within T58m seconds. The mobile station shall interpret the message action time of the Service Option Request Order in accordance with the requirements for the requested service option and the mobile station shall begin using the service configuration implied by the requested service option in accordance with those requirements. The implied service configuration shall include the default Forward and Reverse multiplex options and transmission rate sets associated with the requested service option, and shall include one service option connection for which the service option connection reference is 1, the service option is the requested service option, and the Forward and Reverse Traffic Channel types are both primary traffic. – If the mobile station does not accept the requested service option and has an alternative service option to request, the mobile station shall set SO_REQs to the alternative service option number and shall send a Service Option Request Order requesting the alternative service option within T58m seconds. – If the mobile station does not accept the requested service option and does not have an alternative service option to request, the mobile station shall set SO_REQs to NULL and shall send a Service Option Response Order to reject the request within T58m seconds. The mobile station shall continue to use the current service configuration.
• If the mobile station receives a Service Option Response Order, it shall process the order as follows: – If the service option number specified in the order is equal to SO_REQs, the mobile station shall set SO_REQs to NULL. The mobile station shall interpret the message action time of the Service Option Response Order in accordance with the requirements for the specified service option, and the mobile station shall begin using the service configuration implied by the specified service option in accordance with those requirements. The implied service configuration shall include the default Forward and Reverse multiplex options and transmission rate sets associated with the specified service option, and shall include one service option connection for which the service option connection reference is 1, the service option is the specified service option, and the Forward and Reverse Traffic Channel types are both primary traffic. – If the order indicates a service option rejection, the mobile station shall set SO_REQs to NULL. The mobile station shall continue to use the current service configuration. – If the order does not indicate a service option rejection and the service option specified in the order is not equal to SO_REQs, the mobile station shall set SO_REQs to NULL and shall send a Mobile Station Reject Order (ORDQ = ‘00000100’) within T58m seconds. The mobile station shall continue to use the current service configuration.
• If the mobile station receives a Service Option Control Order, it shall process the order as follows: – If the current service configuration includes a service option connection, the mobile station shall interpret the message action time of the Service Option Control Order in accordance with the requirements for the service option associated with the service option connection and the mobile station shall process the Service Option Control Order in accordance with those requirements; – otherwise, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000001’) within T56m seconds. • If the mobile station receives one of the following service negotiation messages, the mobile station shall send a Mobile Station Reject Order (ORDQ = ‘00000010’) within T56m seconds: 1. Service Connect Message 2. Service Option Control Message 3. Service Request Message 4. Service Response Message Directory: TSGC -> Working Working -> 2section (Continued) 6 Layer 3 Processing Working -> 3gpp2 tsg-c wg 2 swg 3 meeting #40 Meeting Summary Working -> C14-20050516-007 3gpp2 swg 4 title Working -> Radiocommunication Study Groups Download 1.98 Mb. Share with your friends:
|
