Air force 12. 1 Small Business Innovation Research (sbir) Proposal Submission Instructions
AIR FORCE PHASE II ENHANCEMENT PROGRAM
Download 1.41 Mb.
|
- Navigate this page:
- AIR FORCE SBIR PROGRAM MANAGEMENT IMPROVEMENTS
- AIR FORCE SUBMISSION OF FINAL REPORTS
AIR FORCE PHASE II ENHANCEMENT PROGRAMOn active Phase II awards, the Air Force may request a Phase II enhancement application package from a limited number of Phase II awardees. In the Air Force program, the outside investment funding must be from a government source, usually the Air Force or other military service. The selected enhancements will extend the existing Phase II contract awards for up to one year and the Air Force will match dollar-for-dollar up to $500,000 of non-SBIR government matching funds. If requested to submit a Phase II enhancement application package, it must be submitted through the DoD Submission Web site at www.dodsbir.net/submission. Contact the local awarding organization SBIR Manager (see Air Force SBIR Organization Listing) for more information. AIR FORCE SBIR PROGRAM MANAGEMENT IMPROVEMENTSThe AF reserves the right to modify the Phase II submission requirements. Should the requirements change, all Phase I awardees that are invited to submit Phase II proposals will be notified. The AF also reserves the right to change any administrative procedures at any time that will improve management of the AF SBIR Program. AIR FORCE SUBMISSION OF FINAL REPORTSAll Final Reports will be submitted to the awarding AF organization in accordance with the Contract. Companies will not submit Final Reports directly to the Defense Technical Information Center (DTIC). SPECIAL INSTRUCTIONS for Topic AF121C-123 These special instructions apply only to topic AF121C-123, “Transparency Sensor System,” and are in addition to the regular instructions listed at the beginning of the AF section of the solicitation. This is a manufacturing-related R&D Critical SBIR topic. The primary focus of the Phase I effort is to demonstrate the feasibility of developing, integrating and transitioning innovative process technologies in a manufacturing environment to support the production of inline materials for advanced weapon system(s). For this effort, Phase I objectives are to define the requirements to establish an initial measurement capability to nondestructively measure and characterize inline thin film mat material in a production environment to ensure specification compliant materials are being produced. In addition to demonstrating the proposed technology solution, successful offerors should also consider the technical, business and transition activities necessary to lower the risk of technology insertion into the integration processes of a joint service weapon system. The Air Force plans to award two Phase I contracts on this topic, each limited to $150,000. Phase I contracts will be executed at an accelerated pace, a seven-month effort, including four months for technical effort and an additional three months for reporting. The Phase I effort will identify and provide a proof of feasibility concept and a plan for the overall system concept and architecture. Phase I results must demonstrate a technical solution meeting all program end requirements. As this effort is focused on AF and joint service weapon system specialty material production, successful offerors may find it useful to dialog and/or partner with an AF/DoD prime in order to understand specific system requirements, implementation risks and transition windows. Successful offerors may also benefit from consideration of technical readiness levels (TRL) as well as manufacturing readiness levels (MRL) when preparing responses to the Critical SBIR. The primary focus of Phase II is to develop and implement to TRL/MRL 7 maturity the nondestructive evaluation measurement system defined under the Phase I effort. The AF plans to award one Phase II effort of no more than $4M. Examples of the additional information needed in the Phase II proposal package include the following: innovative technical approaches to address the critical processes, associated return on investment (ROI), and potential related uses. Also, the Phase II proposal must include both business and transition plans. Submission of a Phase II proposal will be by invitation only. At that time, special instructions will be provided for proposal preparation. SPECIAL INSTRUCTIONS for Topic AF121C-125 These special instructions apply only to Air Force Topic AF121C-125, "Inlet/Exhaust Damage Registration Sensor,” and are in addition to the regular instructions listed at the beginning of the AF section of the solicitation. This is a R&D Critical SBIR topic. The primary focus of this effort is to demonstrate the feasibility of developing, integrating and transitioning innovative process technologies in the field environment to support the identification, characterization and registration of defects/damage in the inlet/exhaust specialty coating of advanced weapon systems. For this effort, Phase I objectives are to define the requirements to establish an initial measurement capability to accurately and rapidly identify, characterize and register the defects to the aircraft coordinates. In addition to demonstrating the proposed technology solution, successful offerors should also consider the technical, business and transition activities necessary to lower the risk of technology insertion into the integration processes of a joint service weapon system. The Air Force plans to award two Phase I contracts on this topic, each limited to $150,000. . Phase I contracts will be executed at an accelerated pace, a seven-month effort, including four months for technical effort and an additional three months for reporting. The Phase I effort will identify and provide a proof of feasibility concept and a plan for the overall system concept and architecture. Phase I results must demonstrate a technical solution meeting all program end requirements. As this effort is focused on AF and joint service weapon system inlet/exhaust specialty coating inspection and characterization, successful offerors may find it useful to dialog and/or partner with an AF/DoD prime in order to understand specific system requirements, implementation risks and transition windows. Successful offerors may also benefit from consideration of technical readiness levels (TRL) as well as manufacturing readiness levels (MRL) when preparing responses to the Critical SBIR. The primary focus of Phase II is to develop and implement to TRL/MRL 7 maturity the nondestructive evaluation measurement system defined under the Phase I effort. The AF plans to award one Phase II effort of no more than $4M. Examples of the additional information needed in the Phase II proposal package include the following: innovative technical approaches to address all program end requirements and potential related uses. Also, the Phase II proposal must include both business and transition plans. Submission of a Phase II proposal will be by invitation only. At that time, special instructions will be provided for proposal preparation. Air Force Program Manager Listing
Air Force SBIR 12.1 Topic Index AF121-001 Micro Scale Testing of High Speed Aircraft AF121-002 Intelligent Controller Development for Cooperative UAV Missions AF121-003 Structural Radio Frequency Electronics AF121-004 Intelligent Course of Action (ICOA) Generation for Air Vehicle Self-Defense AF121-008 Free-Space Quantum Key Distribution AF121-009 Uncued Faint Object Detection in LEO and GEO AF121-010 Feature Identification from Unresolved Electro-optical Data AF121-011 Daytime Detection and Tracking of Objects in a Geosynchronous or Geo-transfer Orbit AF121-012 Characterization of GEO Insertion Maneuvers Utilizing Spectral, Photometric, and Image Analysis Techniques coupled with High Precision Orbit Determination Algorithms AF121-016 Curved Flat Panel Microdisplay (CFPM) AF121-017 Adaptive Gaming and Training Environment for Maintenance Operations AF121-018 Color symbology in helmet mounted visors and heads up displays AF121-019 Wide Spectral Response Focal Plane Array (FPA) AF121-020 Performance-Based Simulation Certification (SIMCERT) System AF121-021 Correlated Weather Visual and Sensor Effects for Distributed Mission Operations AF121-022 Debrief and After-Action Review Technologies for Electronic Warfare Simulation and Training AF121-023 Cognitive Measures and Models for Persistent Surveillance AF121-025 Flexible Semi-Conformal Displays for Data Access in Military Field Operations AF121-026 Flightline Boundary Sensor AF121-027 3D Stereo Binocular Head Mounted Display (HMD) Technology for Joint Strike Fighter (JSF) Aircraft and Simulation AF121-028 Measurement of Interpupillary Distance for Binocular Head-Mounted Displays (HMDs) AF121-029 Network Threat Monitoring, Intrusion Detection, and Alert System for Live, Virtual, and Constructive (LVC) Operations for Space Training AF121-030 Agent-Based Objective Performance Measurement Brief/Debrief and After Action Review Suite for Cyber Warfare Training AF121-031 Enhancing Decision Making through Adaptive Trustworthiness Cues AF121-032 Efficient Computational Tool for RF-Induced Thermal Response AF121-033 Discourse Analysis for Insights into Group Identity and Intent AF121-036 Ultra-Fast Transfer Techniques to Download Data AF121-037 Next Generation Mobile Ad-hoc Networking (MANET) for Aircraft AF121-038 Joint Aerial Layer Network High Capacity Backbone Antennas AF121-040 Cloud/Grid/Virtualization Architecture for Air Force Weather AF121-041 Directional Partial Mesh Airborne Networking AF121-042 V/W Band Airborne Radomes AF121-043 Software Isolation from Evolution of Hardware and Operation Systems AF121-046 W-band Transmitter AF121-048 Dynamic Reallocation and Tasking AF121-049 Emerging Software Algorithms for Autonomous Sense Making Operations AF121-050 Link Analysis of Knowledge Derived from Social Media Sources AF121-051 Remote Attestation and Distributed Trust in Networks (RADTiN) AF121-055 Graphene Memory Device AF121-056 Integrated Li-Ion Battery Interface Electronics for Spacecraft AF121-057 Novel Environmental Protection for Multi-Junction Solar Cells AF121-058 High-Strain Conductive Composites for Satellite Communications (SATCOM) Deployable Antennas AF121-059 Wide Temperature Optical Transceivers AF121-060 High Conductance Thermal Interface Material for Use in Space Applications AF121-061 Spacecraft Autonomy AF121-062 Light Weight Shielding for Satellite Protection from Severe Space Weather AF121-063 Joint Processing of Multi-band Signals with Information Assurance AF121-064 A Small Satellite-based System for Active and Passive Sounding of the Ionosphere, Direct Current (DC) through High Frequency (HF) AF121-065 Space Particle Radiation Sensor AF121-066 Miniaturized Neutral Wind Sensor AF121-067 Broadband High Temperature Focal Plane Array (FPA) AF121-068 Innovative Technologies for Operationally Responsive Space (ORS) AF121-069 Advanced Space Energy Storage that Incorporates Long Cycle Life at High Depths of Discharge AF121-070 Compact Type I Space Encryption Hardware AF121-071 Multi-function Laser Module (MFL) for Enhanced Space Surveillance AF121-072 Dual-mode Wavefront Sensor for Space Surveillance AF121-073 Anti-reflective Coating for High-Efficiency Solar Cells AF121-074 Wide Field of View (FOV) High Gain Pulse Optical Amplifier AF121-075 Rigid-Panel-Solar-Array Deployment Synchronization Mechanisms for Rapid Assembly and Reduced Cost AF121-084 Automated Distributed Data Fusion of Correlated Space Superiority Events AF121-085 Advanced Algorithms for Space-Based Next-Generation Infrared Sensor Exploitation AF121-086 Omni-directional Adaptive Imaging Sensor AF121-087 Automation of Satellite On-orbit Checkout and Calibration Process AF121-090 Modeling of Synergistic Effects for Cooperative Strike AF121-091 Miniature High-Altitude Precision Navigation Alternative AF121-092 High-Speed Weapon Radomes AF121-095 Mobile Target Secondary Debris (MTSD) AF121-096 Next Generation Static Warhead Testing (NG-SWaT) AF121-097 Weapon Burial Secondary Debris (WBSD) AF121-098 Guided Munition Delivery Accuracy Methodology for Weaponeering Against Moving Targets (GuMDAM-AMT) AF121-102 Detection of Hostile Fire from the Remotely Piloted Aircraft (RPA) AF121-103 Remotely Operated Sensor, Beacon, and Navigation Aid for Deep Battlespace (Remote Sensing)
AF121-104 Feature Representations for Enhanced Multi-Agent Navigation Strategies AF121-105 Infrared Panoramic Projection for Wide Field of Sensor Testing AF121-106 Autonomous Situational Awareness for Munitions AF121-107 Kinetic Energy Control Technologies for Explosively-dispersed Fragments AF121-108 Direct Detection Ladar Pulse Processing AF121-111 Lightweight Electromagnetic (EM) Shielding Structural Materials AF121-112 Near-Surface Residual Stress Measurements for Aerospace Structures AF121-113 Residual Stress Engineering for Aerospace Structural Forgings AF121-114 Lightweight Active Anti-Icing/De-Icing for Remotely Piloted Aircraft (RPA) AF121-115 Fabrication and Process Optimization of Thick Laminates (= 40 ply) From High- Temperature Polyimide/Carbon Fiber Composites AF121-120 Surface Preparation of Organic Matrix Composites (OMCs) for Structural Adhesive Bonding AF121-121 Porosity-Free Molded Surfaces for Out-of-Autoclave (OoA) Composites AF121-122 Advanced Process Control for Laser Sintered Thermoplastics AF121-124 Inline Material Sensor (IMS) AF121-126 Optical Filters on Thin Cover Glass AF121-127 Spatially Controlled Optical Attenuator AF121-128 Simulation of Small-Scale Damage Evolution During Processing of Polymer Matrix Materials Systems AF121-129 Innovative Nondestructive Damage Characterization Methods for Complex Aircraft Structures AF121-130 Computational Process Model Development for Direct Digital Manufacturing (DDM) AF121-131 Passive Microfluidic Devices as Biological Fuel Cell Platforms AF121-135 Passive multi-spectral sensor for defense against hypersonic missiles (SAMs and A-A)
(SUAS)
AF121-137 High Gain Ka-Band Data Link Antennas with Wide-Field-of-Regard (WFOR) AF121-138 Airborne Passive Radar AF121-139 Improved Real Time Geo-Registration Techniques For Airborne Imagery AF121-140 Multi-Sensor Data Compression AF121-142 Unified Move Stop Move Combat Identification AF121-143 Inverse Synthetic Aperture Radar (ISAR) For Terrestrial Targets AF121-144 Wind Turbine Clutter Mitigation for Terminal Air Traffic Control (ATC) Radars AF121-145 HF Digital Receiver AF121-146 Passive Optical Taggants for Laser Designated Friend or Foe Identification AF121-147 Low Size, Weight and Power Direction Antenna for Common Data Link AF121-148 Virtual Receiver/Exciter (VREX) Generalized Simulator with Selectable Waveforms to Support Radar and Software Analysis AF121-152 W-band Airborne SATCOM Power Amplifier AF121-153 V-band Microwave Power Module AF121-154 Low Noise Amplifier with Noise-cancelling for Satellite Communications AF121-155 Next Generation vacuum Nanoelectric Device AF121-156 Power Efficient Software Defined Radio (SDR) Mobile Architecture Technology for Handheld Devices AF121-157 Quantitative assessments leveraging effects based analysis for degraded PNT AF121-158 GPS Enhanced Dynamic Spectrum Access AF121-159 Monolithic S-band Multichannel Transmit/Receive Module for Communication Phased Array Antennas AF121-160 Laser Instrumentation for Development of Sensors Aboard Hypersonic Air Vehicles AF121-163 Performance Prediction for Airborne Multistatic Radar AF121-164 Conformal Coherent Optical Sensor AF121-165 Uncertainty-Preserving 3D Reconstruction from Passive Motion Imagery AF121-166 Low Cost Universal Reliability System On-A-Chip for Multi-Channel Characterization AF121-169 Bearings for High-Speed Cruise Missile Engine AF121-170 Prognostics Approaches for Remote Piloted Aircraft (RPA) Propulsion and Vehicle Systems in Harsh Environments AF121-171 Optimizing Coating Processes and Chemistries for Enhanced Hot Section, Low Cycle Fatigue (LCF) Life AF121-172 In Situ, Real-time Monitoring of the Properties of Engine Part Coatings AF121-173 Engine Health Management of Mechanical Systems for High Performance Turbine Engines AF121-174 Adaptive Heat Rejection for Two-Phase-Enabled Aircraft Thermal Management Systems (TMS) AF121-175 Hydration Tolerant, low Thermal Conductivity (K) Thermal Barrier Coatings AF121-181 Low-Temperature Sintering Processes for Ceramic-Coated Heat Exchangers AF121-182 Miniature Infrared Camera for High Temperature and High Pressure Applications AF121-183 Novel Silicon Carbide Epitaxy Process for Dramatic Improvements to Material Characteristics, Cost, and Throughput AF121-184 Thermal Management for Military Aircraft High Performance Electrical Actuation System
AF121-185 Prognostic Health Management (PHM) of Electromechanical Actuation (EMA) Systems for Next-Generation Military Aircraft AF121-187 Reconstruction Algorithms for High-Energy Computed Tomography Images of Rocket Motors
AF121-188 Techniques to Suppress Cavitation in Liquid Rocket Engines AF121-189 Novel Engine Cycles for Upper Stage Liquid Rocket Engines AF121-191 High-Frequency Sensors and Actuators for Scamjet Engine Controls AF121-192 Wireless Power for Battlefield Airmen Operation AF121-193 Mapping Liquid Mass Fractions in Optically Dense Rocket Combustion Chambers AF121-194 Spatiotemporal Dynamical System Analysis Tools for Very Large Data Sets AF121-197 Fire Suppressant Transport Model AF121-199 Aircraft Tire Thermal Measurment Device AF121-201 Massive Parallel SAR Scene Simulator AF121-202 High-Speed, Multispecies Sensing in Gas Turbine Engines and Augmentors AF121-203 Modeling and Simulation for Combined Space Environment Chambers AF121-204 Fabrication Process for Small, High-precision Aerodynamic Balances AF121-207 Floral Disruptor - Directed Energy Weed Abatement and Prevention Tool AF121-208 System Identification and Modal Extraction from Response Data AF121-209 Low Background Blackbody AF121-212 Re-evaluation of Oil Analysis Program AF121-213 Condition Based Maintenance: Planning and Implementation AF121-214 Wireless Technology for Probes and Accessories for Nondestructive Inspection Testing Instruments AF121-215 Alternatives to Gold-Plate Engines for Test Cell Correlation AF121-218 Designer Soap for Washdown of Work Areas Where Hexavalent Chrome Paints/Primers are Applied AF121-219 Chemical Treatment of Metal Finishing Industrial Wastes and Wastewaters in the Presence of Chelating Substances AF121-220 Physiological testing for Hexavalent Chrome exposure in the human body AF121-222 Hand Held Real Time Particulate Loading Sensor AF121-224 Common Global Information Grid Interface for Electronic Warfare systems AF121-225 Just In Time (JIT) Aircraft Maintenance System AF121-226 Next Generation Aircraft Simulation Technology AF121-227 Common Operational Specific Emitter Identification (SEI) functionality for sustained Electronic Warfare (EW) systems AF121C-123 Transparency Sensor System (TSS) AF121C-125 Inlet and Exhaust Damage Registration Sensor
Directory: osbp -> sbir -> solicitations -> sbir20121 solicitations -> Navy sbir fy09. 1 Proposal submission instructions solicitations -> Army 16. 3 Small Business Innovation Research (sbir) Proposal Submission Instructions sbir20121 -> Air force 12. 1 Small Business Innovation Research (sbir) Proposal Submission Instructions solicitations -> Army 14. 1 Small Business Innovation Research (sbir) Proposal Submission Instructions solicitations -> Navy small business innovation research program submitting Proposals on Navy Topics solicitations -> Navy small business innovation research program solicitations -> Armament research, development and engineering center solicitations -> Army 17. 1 Small Business Innovation Research (sbir) Proposal Submission Instructions solicitations -> Navy 11. 3 Small Business Innovation Research (sbir) Proposal Submission Instructions Download 1.41 Mb. Share with your friends:
|