Cisco Certified Network Associate (ccna) Practice Lab
Download 1.21 Mb.
|
- Navigate this page:
- Step 11
| Password:
cisco1 Password: cisco You will see the following output: NYACCESS1>enable Password: Password: NYACCESS1# Step 10View the running configuration once more by entering the following command. Again, find the enable password configuration line: NYACCESS1# show running-config Press Enter. You will see the following output: NYACCESS1#show running-config Building configuration... Current configuration : 1373 bytes ! ! Last configuration change at 00:44:06 UTC Mon Mar 1 1993 ! version 15.0 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname NYACCESS1 ! boot-start-marker boot-end-marker ! enable secret 5 $1$0YPF$m21ruuFYgz/mM3zW3PGl/0 enable password cisco1! <-- Output Omitted --> Notice that the enable secret configuration command is encrypted, and the enable password is not. Clearly, it is better to have passwords in an encrypted form in your configuration files than in cleartext. Note: The encrypted hash may be different than shown in the above output. Step 11It is possible to encrypt all clear text passwords that exist within the running configuration. To do this, you can use the service password-encryption in global configuration mode to encrypt clear text passwords. Configure this setting as follows. Type the following commands (press Enter after each command): NYACCESS1# configure terminal Press Enter. NYACCESS1(config)# service password-encryption Press Enter. NYACCESS1(config)# exit Press Enter. You will see the following output: NYACCESS1#configure terminal Enter configuration commands, one per line. End with CNTL/Z. NYACCESS1(config)#service password-encryption NYACCESS1(config)#exit NYACCESS1# Download 1.21 Mb. Share with your friends:
|