Curriculum Vitae of Peter Hodgson contact



Download 453.23 Kb.
Page3/7
Date31.07.2017
Size453.23 Kb.
#25807
1   2   3   4   5   6   7

P.D. Hodgson, A. Shokouhi and H. Beladi (2008), “A descriptive model for the formation of ultrafine grained steels”, ISIJ International, 48 (8), pp 1046-1049

  • Y. Chunhui, I. Sabirov, J. Mullins and P.D. Hodgson (2008), “Analytic prediction of structural stress-strain relations of microstructured metal”, Advanced Materials Research, 32, pp 83-86

  • S. Kashef, S.A. Asgari, P.D. Hodgson, W. Yan (2008), “Residual thermal stresses in a Fe3AI/AI2O3 gradient coating system, Advanced Materials Research Vol 32, pp 71-74

  • I Sabirov, Y. Estrin, M.R. Barnett, I. B. Timokhina and P.D. Hodgson, (2008), “Deformation Behaviour of an Ultra-Fine Grained Al6082 Alloy”, Materials Science Forum, Vol 584-586 (2008) pp. 703-708

  • J. Wang, P.D. Hodgson, J. Zhang, W. Yan and C. Yang, (2008), “Effects of quenching rate on amorphous structures of Cu46Zr54 metallic glass”,, Materials Processing Technology, (In Press)

  • C. Yang, I. Sabirov, J. Mullins and P.D. Hodgson (2008), “Analytic Prediction of Structural Stress-strain Relationsof Microstructured Metal”, Advanced Materials Research, Vol 32, pp 83-86, Trans Tech Publications, Ltd Switzerland

  • J. Xiong, Y. Li, X. Wang, P.D. Hodgson and C. Wen (2008), “Mechanical properties and bioactive surface modification via alkali-heat treatment of a porous Ti–18Nb–4Sn alloy for biomedical applications”, Acta Biomaterialia, 4 (2), pp 1963-1968, Elsevier, Netherlands

  • Oudin, P.D. Hodgson and M.R. Barnett (2008), “EBSD Analysis of a Ti-IF Steel Subjected to Hot Torsion in the Ferritic Region”, Materials Science and Engineering: A, Vol 486 (2008) pp 72-79

  • S. Kashef, W. Yan, J. Lin, P.D. Hodgson (2008), “Mechanical Properties of Titanium Foam for Biomedical Applications”, World Scientific

  • X. Chen, Y. Li, P.D. Hodgson and C. Wen (2008), “Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids”, Materials Science and Engineering C:Materials for Biological Applications, 29 (1), pp 165-171

  • N. Yazdipour, C.H.J. Davies and P.D. Hodgson (2008), “Microstructural modeling of dynamic recrystallization using irregular cellular automata”, Computational Materials Science 44, pp 566-576

  • X. Wang, Y. Li, J. Lin, P. D. Hodgson and C. Wen (2008) “Effect of heat-treatment atmosphere on the bond strength of apatite layer on Ti substrate”, Dental Materials, vol. 24 (11),, pp 1549-1555

  • X.J. Wang, Y.C. Li, J.G. Lin, Y. Yamada, P.D. Hodgson and C.E. Wen (2008) “In vitro bioactivity evaluation of titanium and niobium metals with different surface morphologies”, Acta Biomaterialia, Vol 4, No. 5, pp 1530–1535

  • X.B. Chen, A. Nouri, Y. Li, J. Lin, P.D. Hodgson and C. Wen (2008), “Effect of Ssrface Rrughness of Ti, Zr, and TiZr on Apatite Precipitation From Simulated Body Fluid”, Biotechnology and Bioengineering, Vol 101, No 2, pp 378-387

  • Dehghan-Manshadi, J.J. Jonas, P.D. Hodgson and M.R. Barnett (2008) “Correlation between the Deformation and Post-deformation Softening Behaviours in Hot Worked Austentite”, ISIJ International, Vol 48, No 2, pp 208-211

  • Yang, P.D.Hodgson, Liu, Q. and L. Ye (2008) “Geometrical Effects on Residual Stresses in 7050-T7451 Aluminium Alloy Rods Subject to Laser Shock Peening”, Journal of Materials Processing Technology, Vol 201, 1-3, pp 303-309

  • H. Xie, J. Lin, Y. Li, W. Yan, P.D. Hodgson, and C.E. Wen (2008) “Plastic deformation in Zr41Ti14Cu12.5Ni10Be22.5 bulk metal glass under Vickers indenter”, Journal of Alloys and Compounds, Vol 461, 1-2, pp 173-177.

  • Nouri, X. Chen, Y. Li, Y. Yamada, P.D. Hodgson and C.E. Wen (2008), “Synthesis of Ti-Sn-Nb Alloy by Powder Metallurgy”, Materials Science & Engineering A, Vol 485, pp 562–570

  • S. Kashef, S.A. Asgari, P.D. Hodgson and W. Yan (2008), “Simulation of Three-point Bending Test of Titanium Foam for Biomedical Applications”, Advanced Materials Research, Trans Tech Publications, Vol 32 pp 237-240

  • Dehghan-Manshadi, M.R. Barnett and P.D. Hodgson (2008) “Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation”, Materials Science and Engineering: A, Vol 485 No 1-2, pp 664–672

  • S.A. Asgari, M. Pereira, B.F. Rolfe, M. Dingle and P.D. Hodgson (2008) “Statistical analysis of finite element modeling in sheet metal forming and springback analysis”, Journal of Materials Processing Technology, Vol 203, No 1-3, pp 129-136

  • S.A. Asgari, P.D. Hodgson, V. Lemiale, C. Yang, and B.F. Rolfe (2008), “Multiscale Particle-In-Cell Modelling for the Advanced High Strength Steels”, Advanced Materials Research, Vol 32, pp 285-288

  • J.Y. Xiong, Y.C. Li, X.J. Wang, Hodgson, P.D. and C.E. Wen (2008), “Titanium-nickel shape memory alloy foams for bone tissue engineering”, Journal of the Mechanical Behavior of Biomedical Materials, Vol 1, Issue 3, July 2008, pp 269-273

  • Sabirov, Y. Estrin, M.R. Barnett, I. Timokhina and P.D. Hodgson (2008), “Enhanced tensile ductility of an ultra-fine-grained aluminum alloy”, Scripta Materialia, Vol 58, pp 163-166

  • L.T. Robertson, T.B. Hilditch and P.D. Hodgson (2008) “The effect of prestrain and bake hardening on the low-cycle fatigue properties of TRIP steel”, International Journal of Fatigue, Vol 30, Issue 4, pp 587-594

  • L. Kong, F. She, W. Gao, S. Nahavandi and P.D. Hodgson (2008) “Integrated Optimization System for High Pressure Die Casting Processes”, Journal of Materials Processing Technology, Vol 201, 1-3, 26 May, pp 629-634

  • Sabirov, Y. Estrin, M.R. Barnett, I. Timokhina, P.D. Hodgson (2008) “Tensile deformation of an ultrafine-grained aluminium alloy: Micro shear banding and grain boundary sliding”, Acta Materialia, Vol 56, 10, pp 2223-2230

  • F.H. She, W.M. Gao, Z. Peng, P.D. Hodgson and L.X. Kong (2008) “Micro- and nano-characterization of membrane materials”, Journal of the Chinese Institute of Chemical Engineers, Vol 29, 4, pp 313-320

  • P.D. Hodgson, S.A. Shokouhi, and H. Beladi, (2008) “A Descriptive Model for the Formation of Ultrafine Grained Steels”, ISIJ International Vol 48, 8, pp 1046-1049

  • W. Yan, Q. Sun and P.D. Hodgson (2008) “Determination of Plastic Yield Stress from Spherical Indentation Slope Curve”, Materials Letters, Science Direct, Vol 62, 15, pp 2260-2262

  • Nouri, X. Chen, Y. Li, Y. Yamada, P.D. Hodgson and C.E. Wen (2007) “Synthesis of Ti-Sn-Nb Alloy by Powder Metallurgy”, Materials Science & Engineering A 485 (1-2), pp 664-672

  • V. S. Rao, B.P. Kashyap, N. Prabhu, and P.D. Hodgson (2008), “T-shaped equi-channel angular pressing of Pb–Sn eutectic and its tensile properties”, Materials Science and Engineering: A, Vol 486 pp 341–349

  • Oudin, P.D. Hodgson and M.R. Barnett (2008) “EBSD Analysis of a Ti-1F Steel Subjected to Hot Torsion in the Ferritic Region”, Materials Science and Engineering: A, Vol 486 (1-2), pp 72-79

  • X.J. Wang, Y. Li, J.G. Lin, P.D. Hodgson and C.E. Wen (2008), “Apatite-Inducing Ability of Titanium Oxide Layer on Titanium Surface: The Effect of Surface Energy”, Materials Research, Vol 23, No 6, pp 1682-1688

  • Dehghan, M.R. Barnett and P.D. Hodgson (2008), “Hot deformation and recrystallization of austenitic stainless steel: Part 11, Post Deformation Recrystallization”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol 39A (6), pp 1371-1381

  • Dehghan, M.R. Barnett and P.D. Hodgson (2008), “Hot deformation and recrystallization of austenitic stainless steel: Part 1, Dynamic Recrystallization”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol 39A (6), pp 1359-1370

  • Sabirov, Y. Estrin, M.R. Barnett, I. Timokhina and P.D. Hodgson (2008), “Enhanced tensile ductility of an ultra-fine grained aluminium alloy”, Scripta Materialia, Vol 58 (3), pp 163-166

  • L. Madej, P.D. Hodgson and M. Pietrzyk (2007), “The validation of a multiscale rheological model of discontinuous phenomena during metal rolling”, Computational Materials Science Vol 41, pp. 236-241

  • H.W. Lee, H.C. Kwon, Y.T. Im and P.D. Hodgson (2007) “Numerical investigation of austenite grain size distribution in square-diamond pass hot bar rolling”, Materials Processing Technology, Vol 191 No. 1-3, pp 114-118

  • I.B. Timokhina, P.D. Hodgson, S.P. Ringer, R.K. Zheng and E.V. Pereloma, (2007), “Precipitate characterisation of an advanced high-strength low-alloy (HSLA)steel using atom probe tomography”, Scripta Materialia, Vol 56, pp 601-604

  • Dehghan-Manshadi, M.R. Barnett and P.D. Hodgson (2007), “Microstructural evolution during hot deformation of duplex stainless steel”, Materials Science and Technology, Vol. 23, No. 12, pp 1478-1484

  • M. Weiss, M.E. Dingle, B.F. Rolfe and P.D. Hodgson (2007), “The influence of temperature on the springback behavior of metal/polyer-laminates”, Journal of engineering materials and technology, Vol. 129, No. 4, pp 530-537

  • X.B Chen, A. Nouri, P.D. Hodgson and C.E. Wen (2007), “Surface modification of TiZr alloy for biomedical application”, Advanced Materials Research, Vol. 15, No. 17, pp 89-94

  • N. Yazdipour, C.H.J. Davies and P.D. Hodgson (2007), “Simulation of dynamic recrystallization using random grid cellular automata”, Computer Methods in Materials Science, Vol 7, No. 1, pp 168-174

  • Dehghan-Manshadi and P.D. Hodgson (2007) “Dynamic recrystallization of austenitic stainless steel under multiple peak flow behaviours”, ISIJ International, Vol 47 (12), pp 1799-1803

  • Shokouhi and P.D. Hodgson (2007), “Dynamic adjustment of ferrite grains during dynamic strain induced transformation”, Materials Science and Technology, Vol 23, No. 10, pp 1233-1242

  • Muszka, J. Majta and P.D. Hodgson (2007), “Modeling of the mechanical behavior of nanostructured HSLA steels”, ISIJ International, Vol 47, No. 8, pp 1221-1227

  • Madej, H. Paul, BP.D. Hodgson and M. Pietrzyk (2007), “Possibilities to include in numerical simulation stochastic and discontinuous phenomena occurring in material”, Computer Methods in Materials Science, Vol 7, No. 1, pp 162-167

  • J.Y. Xiong, Y.C. Li, X.J. Wang, P.D. Hodgson and C.E. Wen (2007) “Titanium-nickel shape memory alloy foams for bone tissue engineering”, Journal of the Mechanical Behavior of Biomedical Materials, (2007), doi:10.1016/j.jmbbm.2007.9.003 (In Press)

  • Xiong, Y. Li, Y. Yamada, P.D. Hodgson and C.E. Wen (2007) “Processing and Mechanical Properties of Porous Titanium-Niobium Shape Memory Alloy for Biomedical Applications”, Materials Science Forum, Vols. 561-565, pp 1689-1692

  • Nouri, X.B. Chen, P.D. Hodgson and C.E. Wen (2007) “Preparation and characterisation of new titanium based alloys for orthopaedic and dental applications”, Advanced Materials Research, Vols. 15-17, pp 71-76

  • C.E. Wen, W. Xu, W.Y. Hu and P.D. Hodgson (2007) “Hydroxyapatite/titania sol-gel coatings on titanium-zirconium alloy for biomedical applications”, Acta Biomaterialia, Vol 3, pp 403-410

  • H. Xie, J. Lin, Y. Li, P.D. Hodgson and C. Wen (2007), “Composition dependency of the glass forming ability (GFA) in Mg-Ni-Si system by mechanical alloying”, Materials Science & Engineering, A, Vol 459, No. 1-2, pp 35-39

  • C.E. Wen, Y. Yamada, A. Nouri and P.D. Hodgson (2007), “Porous Titanium with Porosity Gradients for Biomedical Applications”, Materials Science Forum, Vols. 539-543, pp 720-725

  • H. Beladi, G.L. Kelly and P.D. Hodgson (2007) “The effect of multiple deformations on the formation of ultrafine grained steels”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol 38, No. 3, pp 450-463

  • H. Beladi, G.L. Kelly and P.D. Hodgson (2007) “Ultrafine grained structure formation in Steels using Dynamic Strain Induced Transformation processing”, International Materials Reviews, Vol 52, No. 1, pp 14-28

  • H. Beladi and P.D. Hodgson (2007), “Effect of carbon content on the recrystallization kinetics of Nb-steels”, Scripta Materialia, Vol 56, No. 12, pp 1059-1062

  • H. Beladi and P.D. Hodgson (2007), “Effect of carbon on the hot deformation behavior in Nb-steels”, Materials Forum, Vol 31, pp 11-15

  • Y. Adachi, M. Wakita, H. Beladi and P.D. Hodgson (2007), “The formation of ultrafine ferrite through static transformation in low carbon steels”, Acta Materialia, Vol 55, No. 14, pp 4925-4934

  • H. Beladi and P.D. Hodgson (2007) The Recrystallization Behaviour of Nb Microalloyed Steels, Materials Science Forum, Vol. 561, No. 565, pp 25-28

  • X.J. Wang, Y.C. Li, P.D. Hodgson and C.E. Wen (2007) “Nano and Macro-scale characterisation of the mechanical properties of bovine bone”, Materials Forum, Vol 31, pp 156-159

  • N. Yazdipour, A. Dehghan-Manshadi, C.H.J Davies and P.D. Hodgson (2007), “Simulation of dynamic recrystallization using irregular cellular automata”, Materials Forum, Vol 31, pp 164-176

  • Dehghan-Manshadi and P.D. Hodgson (2007), “Effect of initial grain size on the dynamic recrystallization behaviours of austenite”, Materials Science Forum, 561-565 (Part 1), pp 33-36

  • W. Yan, Q. Sun and P.D. Hodgson (2007), “A characfgeristic of spherical indentation curve and its application in measuring material properties”, Materials Science Forum, 561-565 (Part 3), pp 2131-2134

  • J.G. Lin, H.W. Xie, Y.C. Li, P.D. Hodgson and C.E. Wen (2007), “Indentation study on the pressure sensitivity of a Zr-based bulk metallic glass”, Materials Forum, Vol 31, pp 139-143

  • Y.C. Li, J.Y. Xiong, J.G. Lin, M. Forrest, P.D. Hodgson and C.E. Wen (2007), “Mechanical properties and energy absorption of ceramic particulate and resin-impregnation reinforced aluminium foams”, Materials Forum, Vol 31, pp 52-56

  • Madej, P.D. Hodgson and M. Pietrzyk (2007), “Comparison of the Strain Distribution Obtained from Multi Scale and Conventional Approaches to Modelling Extrusion”, Solid State Phenomena, Vol. 129, pp 25-30

  • Madej, P.D. Hodgson and M Pietrzyk (2007) “Multi-scale rheological model for discontinuous phenomena in materials under deformation conditions”, Computational Materials Science, Vol 38, Vol 4, pp 685-691

  • I.B. Timokhina, P.D. Hodgson, S.P. Ringer, R.K. Zheng and E.V. Pereloma (2007) “Characterisation of Nano-Scale Particles in Hot-Rolled, High Strength Low Alloy Steels (HSLA)”, Materials Science Forum, PRICM6, Vols. 561-565 (Part 3), pp 2083-2086

  • I.B. Timokhina, P.D. Hodgson and E.V. Pereloma (2007) “Transmission electron microscopy characterization of the bake-hardening behavior of transformation-induced plasticity and dual-Phase Steels”, Metallurgical and Materials Transactions A, Vol 38, No. 10, pp 2442-2454

  • I.B. Timokhina, E.V. Pereloma and P.D. Hodgson (2007) “Effect of Initial processing on the Microstructure-Property relationships in the bake-hardened C-Mn-Si Trip Steels”, Materials Science Forum, Vols. 539-543, pp 4315-4320

  • E.V. Pereloma, I.B. Timokhina, M.K. Miller and P.D. Hodgson (2007), “Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels”, Acta Materialia, Vol 55, Vol 8, pp 2587-2598

  • P.N. Pathirana, A.E.K. Lim, A.V. Savkin and P.D. Hodgson (2006) “Robust Video/Ultrasonic Fusion-Based Estimation for Automotive Applications”, IEEE transactions on vehicular technology, Vol 56, No. 4, pp 1631-1639

  • Yang, Z. Su, L. Ye, L. Zhou and P.D. Hodgson (2007) “A signal processing approach for elastic wave-based structural health monitoring using active piezoelectrics”, Key Engineering Materials, Vols 334-335, pp 1141-1144

  • Yang, P.D. Hodgson, Q. Liu and L. Ye (2007) “Three-dimensional Finite Element modelling of laser shock peening Process”, Materials Science Forum, Vols. 561-565, pp 2261-2264

  • R. Lapovok and P.D. Hodgson (2007) “Determination of lower-bound ductility for AZ31 magnesium alloy by use of the bulge specimens”, Journal of Engineering Materials and Technology, Vol. 129, Vol 3, pp 407-413

  • Eghbali, A. Abdollah-zadeh and P.D. Hodgson (2007), “Dynamic softening of ferrite during large strain warm deformation of a plain-carbon steel”, Materials Science and Engineering A, Vol 462, No. 1-2, pp 259-263

  • W.M. Gao, L.X. Kong and P.D. Hodgson (2007) “Computational simulation of gas flow and heat transfer near an Immersed object in fluidized beds”, Advances in Engineering Software, Vol. 38,No. 11-12, pp 826-834

  • W.M. Gao, L.X. Kong and P.D. Hodgson (2007) “Alternating heat transfer between objects of large geometrical difference”, Advances in Engineering Software, Vol 38, No. 11-12, pp 818-825

  • W.M. Gao, L.X. Kong and P.D. Hodgson (2007) “Finite element simulation of deformation processes of micro-components”, Mechanical Science and Technology, Vol 21, pp 1456-1463

  • Yang, I. Sabirov, J. Mullins, N. Yazdipour, S.A. Asgari and P.D. Hodgson (2007), “Structure-property relations of metallic materials with multiscale microstructures”, Materials Forum, Vol 31, pp 177-185

  • Nouri, J.G. Lin, Y.C. Li, Y. Yamada, P.D. Hodgson and C.E. Wen (2007), “Microstructure evolution of Ti-Sn-Nb alloy prepared by mechanical alloying”, Materials Forum, Vol 31, pp 64-70

  • N.K.B.M.P. Nanayakkara, G.L. Kelly and P.D. Hodgson (2007), “Application of bending under tension test to determine the effect of tool radius and the contact pressure on the coefficient of friction (2005), Materials Forum, 29, pp 114-118

  • J.Y. Xiong, Y.C. Li, P.D. Hodgson and C.E. Wen (2007), “TiNi shape memory alloy foams synthesized by spacer sintering and their properties”, Journal of Materials Science and Engineering, Vol 25, No. 6, pp 892-894

  • H.W. Lee, H. C. Kwon, Y.T. Im and P. D. Hodgson (2006), “Microstructure Evolution Modeling of Square-Diamond Pass Hot Bar Rolling of AISI 4135 Steel”, Computer Methods in Materials Science, Vol.6, No. 3, pp140-149

  • N.K.B. Manjula P. Nanayakkara and P.D. Hodgson, (2006), “Determination of Drawbead Contacts with Variable Bead Penetration”, Computer Methods in Materials Science, Vol. 6, No. 3, 2006, pp188-194

  • W. Xu, W.Y. Hu, M.H. Li, Q.Q. Ma, P.D. Hodgson and C.E. Wen (2006), “Sol-gel derived HA/TiO2 double coatings on Ti scaffolds for orthopaedic applications”, Transactions of Non ferrous Metals, Society of China, Vol. 16, No. 1, pp 209-216

  • C.E. Wen, Y. Yamada and P.D Hodgson (2006), “Fabrication of Novel TiZr alloy foams for biomedical applications”, Materials Science and Engineering C, Vol 26, No. 8, pp 1439-1444

  • X.J. Wang, X.B. Chen, P.D. Hodgson and C.E. Wen (2006), “Elastic modulus and hardness of Cortical and trabecular BovinE Bone Measured by Nanoindentation”, Transactions of Nonferrous Metals Society of China, Vol.16, No. 2, pp 744-748

  • Madej, P.D. Hodgson and M. Petrzyk (2006), “Multi scale analysis of material behaviour during deformation processes”, Foundation of Materials Design, pp 17-46

  • L.T. Robertson, T.B. Hilditch and P.D. Hodgson (2006), “Low-Cycle Fatigue Properties of TRIP Steel”, Proceedings Materials Science & Technology, (MS&T’06), Vol. 2, pp 63-73

  • Muszka, P.D Hodgson and J. Majta (2006), “A Physical based modeling approach for the dynamic behavior of ultrafine grained structures”, Journal of Materials Processing Technology Vol. 177, No. 1-3, pp 456-460

  • Eghbali, A. Abdollah-Zadeh, H. Beladi and P.D. Hodgson (2006)”Characterization on ferrite microstructure evolution during large strain warm torsion testing of plain low carbon steel”, Materials Science and Engineering, Vol. 435-436, pp 499-503

  • Fei and P.D. Hodgson (2006), “Experimental and numerical studies of springback in air V-bending process for cold rolled TRIP steels”, Nuclear Engineering and Design”, Vol. 236, No. 18, pp 1847-1851

  • W.M. Gao, L.X. Kong and P.D. Hodgson (2006) “Local total and radiative heat-transfer coefficients during the heat treatment of a workpiece in a fluidised bed”, Applied Thermal Engineering, Vol 26, No. 14-15, October, pp 1463-1470

  • W.M. Gao, P.D. Hodgson and L.X. Kong (2006), “Numerical analysis of heat transfer and the optimization of regenerators”, Numerical Heat Transfer, Part A Applications, Vol. 50, No. 1, pp 63-78

  • S.H. Zahiri, S. I. Kim, S.M. Byon, P.D. Hodgson (2005) “Models for Static and Metadynamic Recrystallisation of Interstitial Free Steels”, Materials Science Forum, 475-479 (I), pp 157-160

  • N.K.B.M.P. Nanayakkara, J.M. Long and P.D. Hodgson, (2005) ,“Interaction between the coating characteristics of galvanneal steel and forming parameters during flat die drawing”, (2005), Materials Forum, 29, pp 340-344

  • Pereira, A. Asgari, T. De Souza, B. Rolfe, M. Dingle and P.D. Hodgson (2005), “Sheet forming simulation and Springback prediction for AHSS automotive components”, Materials Science and Techno logy, 4, pp 51-62

  • C.E. Wen, Y. Yamada and P.D. Hodgson (2005), “Fabrication of novel metal alloy foams for biomedical applications”, Materials Forum 29, pp 274-278

  • Wallace, A. Brownrigg, P.D. Hodgson, L. Frawley and W. Heath (2005) “Optimization of V/N Ratios and stelmor cooling for electric arc furnace steels used in Galvanized High Tensile Strength Wire Applications”, Materials Science

  • P.D. Hodgson, H. Beladi and M. R. Barnett (2005), “Grain Refinement in Steels through Thermomechanical Processing”, Materials Science Forum, Vols. 40, November 2005, pp 31-38

  • P.D. Hodgson, H. Beladi and G. L. Kelly (2005), “The Development of Ultrafine Grained Steels through Thermomechanical Processing”, Canadian Metallurgical Quarterly, Vol. 44, No. 2, 2005, pp 179-186

  • R.I. Scott and P.D. Hodgson (2005), “The Mechanical Characterization of Low Work Hardening, High Strength Steel”, ASTM International, October 2005, Vol. 2, No. 9, pp 1-15

  • S.M. Zahiri, C.H.J. Davies and P.D. Hodgson (2005), “A mechanical approach to quantify dynamic recrystallization in polycrystalline metals”, Scripta Materialia, Vol. 52, No. 4, pp 299-304

  • D.M. Fabijanic, G.L. Kelly, J. Long and P.D. Hodgson (2005), “A nitrocarburising and low-temperature chromising duplex surface treatment,” Materials Forum , Vol. 29, pp 77-82

  • S.H. Zahiri, S.M. Byron, S.I. Kim, Y. Lee and P.D. Hodgson (2004), “Static and metadynamic recrystallization of interstitial free steels during hot deformation”, ISIJ International, 44 (11), pp 1918-1923

  • S. Khoddam and P.D. Hodgson (2004), “Conversion of the hot torsion test results into flow curve with multiple regimes of hardening “, Materials Processing Technology, Vol. 153-154, pp 839-845

  • R., A. Oudin, A. Najafi-Zadeh, M.R. Barnett and P.D. Hodgson (2004), “Static recrystallisation of Ti –IF steel after warm deformation”, Materials Science Forum, Vol. 467, No. 470, pp 251-256

  • I.B. Timokhina, P.D. Hodgson and E.V Pereloma (2004), “Effect of Microstructure on the stability of retained austenite in transformation-induced-plasticity steels”, Metallurgical and Materials Transactions, Vol. 35A, No. 8, pp 2331-2341

  • N.K.B.M.P. Nanayakkara, G.L. Kelly and P.D. Hodgson (2004) “Determination of the coefficient of friction in partially penetrated draw beads”, Steel Grips, Vol. 2, 10th International Conference Metal Forming 2004, 19-22 September, pp 677-680.

  • H. Beladi, G.L.Kelly and P.D. Hodgson (2004), “Microstructural evolution of ultrafine grained structure in plain carbon steels through single pass rolling”, Materials Science and Technology, Vol 20, No. 12, pp 1538-1544

  • S. Murphy, S. Kalyanasundaram, M Cardew-Hall and P.D. Hodgson (2004), “A hybrid draw die optimization technique for sheet metal forming,” Journal of Manufacturing Science and Engineering Transactions of the ASME 126 (3), August, pp 582-590.

  • G. Mullins, P.D Hodgson and M. E. Dingle (2004), “Using inverse analysis to obtain material behaviour for crash simulations,” Steel Grips, Vol. 2, pp 535-540

  • Download 453.23 Kb.

    Share with your friends:
    • 1   2   3   4   5   6   7



    The database is protected by copyright ©ininet.org 2024
    send message
        Main page
    third international conference