E valuation of a h ybrid n etwork using opnet

Download 0.83 Mb.
View original pdf
Size0.83 Mb.
1   2   3   4   5   6   7   8   9   10   11
Evaluation of a Hybrid Network using OPNET simulato1

OPNET simulator is constructed on top of a discrete event system (DES) and it simulates the system behavior by modeling every event within the system and processes it through user-defined processes. OPNET is extremely powerful software to simulate the heterogeneous network with numerous protocols. It has many distinct ways of creating topologies. Modeler supports almost all network varieties and technologies. OPNET runs on top of ac compiler and provides a GUI. This study is going to be achieved by following the sequence of systematic steps for evaluating networks as conferred by the OPNET design algorithm diagram Figure 1. The diagram fig. 3 below indicates the functionality and characteristics of the OPNET algorithmic architecture which is used in this study to achieve the desired results.
1: Block diagram of Functionality and Characteristics o Fig. 2: Block diagram of Functionality and Characteristics of
OPNET Architecture
Network topology of the adopted design of Radio Gotel, Yola was then created in OPNET virtual environment using appropriate parameters through all connected devices. The topology was shown in figure 3 below. Fig. 3: Network Topology overview
Two main configurations must be configured in the network scenario i. Application Configuration ii. Profile Configuration The application configuration is the most important node in the network design. By default, the application configuration has a maximum of sixteen services, which are supported by the OPNET. These are HTTP, FTP, email, print, remote login, video, and voice applications. To configure the

3 application node right-click on the node, select Edit Attributes a dialogue box will open set the name field value to the application. Expand the Application Definitions rows, select the number of rows (for this scenario is 7), and all the applications names with required settings were implemented. While the profile configuration allows defining a user or a group of users to the application services supported by the network. The profile node can be configured by expanding the profile configuration row. To configure the profile configuration right-click on it, select Edit Attributes a dialogue box will appear. Change the name field value to profiles. Expand the profile configuration row, select edit. During the specification of application definitions to be used for this project work, the Application definition node was configured to support 7 Rows (Seven applications are to be used in this project namely Server_Http, Server_Ftp, Server_E-mail,
Server_Print, Server Video, and
Server_Remote Login applications. Also, in specifying the profile's definition used for this project, the Profile configuration node was configured to support 7 rows, and each row was named with the following profiles HTTP profile, email profile, Voice profile, Print profile, Remote Login profile, Ftp profile and Videoconferencing profile.

Download 0.83 Mb.

Share with your friends:
1   2   3   4   5   6   7   8   9   10   11

The database is protected by copyright ©ininet.org 2023
send message

    Main page