if using word 2003-hyperlink to qpl by holding ctrl & Click qpl)
Download 2.84 Mb.
|
- Navigate this page:
- Product Permittivity (sec
- Sediment Control
- Page 4
- Paving
- Separation
- Stabilization
Subsurface DrainageAHTD Type 1 Shall comply with the requirements for Subsurface Drainage, Class 2 (AASHTO M 288). This geotextile is used by placing against a soil to allow for long-term passage of water into a subsurface drain system retaining the in-situ soil. Product Permittivity (sec-1) AOS Manufacturer150EX 1.1 0.18 mm (80 Sieve) Linq Indust. Fabrics 160N 1.4 0.212 mm (70 Sieve)Mirafi 180N 1.2 0.18 mm (80 Sieve) Mirafi C60NW 1.3 0.18 mm (70 Sieve) Contech Const. Prod. EC8 1.5 0.15 mm (100 Sieve) SRW Products *Filterweave 400 0.95 0.425 mm (40 Sieve) Mirafi *Filterweave 404 0.90 0.425 mm (40 Sieve) Mirafi Filterweave 700 0.28 0.212 mm (70 Sieve) Mirafi FX-60HS 1.3 0.212 mm (70 Sieve)Carthage Mills Geotex 601 1.3 0.212 mm (70 Sieve) Propex Inc. **Geotex 104F 0.28 0.212 mm (70 Sieve) Propex Inc. * Geotex 2 X 2 F 0.7 0.4 mm (45 Sieve) Propex Inc. Geotex 601 1.5 0.212 mm (70 Sieve) Propex Inc. Geotex 801 1.5 0.15 mm (100 Sieve) Propex Inc. GT160 1.6 0.21 mm (70 Sieve) SKAPS Industries MX225 1.3 0.212 mm (70 Sieve) Maccaferri, Inc. NW6 1.5 0.18 mm (80 Sieve) SRW Products **TerraTex EP 0.28 0.212 mm (70 Sieve) Webtec, Inc. TerraTex NO6 1.5 0.212 mm (70 Sieve) Webtec, Inc. TNS R060 1.6 0.15 mm (100 Sieve) TNS Advanced Tech. Typar 3501G 0.5 0.212 mm (70 Sieve) Fiberweb US 160NW 1.3 0.18 mm (80 Sieve) U.S. Fabrics *approved when< 15% of the in-situ soil tested by AASHTO T88 passes 0.075 mm **approved when >/= 15% of the in-situ soil tested by AASHTO T88 passes 0.075 mm AHTD Type 2 Shall comply with the requirements for Subsurface Drainage, Class 3 (AASHTO M 288). This geotextile is used by placing against a soil to allow for long-term passage of water into a subsurface drain system retaining the in-situ soil. Product Permittivity (sec-1) AOS Manufacturer 140EX 1.1 0.21 mm (70 Sieve) Linq Indust. Fabrics 140N 1.8 0.212 mm (70 Sieve) Mirafi 150N 1.5 0.212 mm (70 Sieve)Mifafi 160N 1.4 0.212 mm (70 Sieve) Mirafi 180N 1.2 0.18 mm (80 Sieve) Mirafi C40NW 1.9 0.212 mm (70 Sieve) Contech Const. Prod. EC8 1.5 0.15 mm (100 Sieve) SRW Products *Filterweave 400 0.95 0.425 mm (40 Sieve) Mirafi Filterweave 700 0.28 0.212 mm (70 Sieve) Mirafi FX-40HS 2.0 0.212 mm (70 Sieve) Carthage Mills FX-45HS 1.5 0.212 mm (70 Sieve) Carthage Mills 07/2008 QPL 625.02 Page 2
AHTD Type 2 (continued) Geotex 401 2.0 0.212 mm (70 Sieve) Propex Inc. GT142 1.8 0.21 mm (70 Sieve) SKAPS Industries Geotex 451 2.3 0.212 mm (70 Sieve) Propex Inc. Geotex 501 2.2 0.212 mm (70 Sieve) Propex Inc. Geotex 801 1.5 0.15 mm (100 Sieve)Propex Inc. *GTF 400EO 1.3 0.425 mm (40 Sieve) Linq Indust. Fabrics MX155 1.5 0.212 mm (70 Sieve) Maccaferri, Inc. NW6 1.5 0.18 mm (80 Sieve) SRW Products TerraTex NO4.5 1.8 0.212 mm (70 Sieve)Webtec, Inc. TerraTex NO5 1.7 0.212 mm (70 Sieve)Webtec, Inc. TNS R042 1.8 0.212 mm (70 Sieve)TNS Advanced Tech. Typar 3401G 0.7 0.212 mm (70 Sieve) Fiberweb US 120NW 2.15 0.16 mm (100 Sieve) U.S. Fabrics *approved when< 15% of the in-situ soil tested by AASHTO T88 passes 0.075 mm
1211 0.17 0.300 mm (50 Sieve) DDD Erosion Control, Inc. CSF 330 0.23 0.480 mm (40 Sieve) Cady Industries, Inc. Geotex 351 2.1 0.212 mm (70 Sieve) Propex Inc. GTF 190 0.15 0.6 mm (30 Sieve) Linq Indust. Fabrics GTF 200S 0.08 0.300 mm (50 Sieve) Linq Indust. Fabrics InterWrap 1211 0.17 0.300 mm (50 Sieve) InterWrap Corp. Mirafi 140NL 2.0 0.25 mm (60 Sieve) Mirafi Mirafi FF101 2.90 0.60 mm (30 Sieve) Mirafi Mirafi Filterweave 2.14 0.425 mm (40 Sieve) Mirafi (FW) 402 MISF 1776 0.02 0.35 mm (50 Sieve) Mutual Industries NW4 2.0 0.212 mm (70 Sieve) SRW Products TerraTex NO4 2.1 0.212 mm (70 Sieve)Webtec, Inc. US 180 0.27 0.33 mm (50 Sieve) U.S. Fabrics
1211 0.17 0.300 mm (50 Sieve) DDD Erosion Control, Inc. CSF 330 0.23 0.480 mm (40 Sieve)Cady Industries, Inc. Geotex 501 1.4 0.212 mm (70 Sieve)Propex Inc. GTF 190 1.5 0.6 mm (30 Sieve) Linq Indust. Fabrics GTF 200S 0.07 0.300 mm (50 Sieve)Linq Indust. Fabrics Geotex 2130 0.05 0.6 mm (30 Sieve) Propex Inc. 07/2008 QPL 625.02 Page 3 AHTD Type 4 (continued) MISF 1776 0.02 0.35 mm (50 Sieve) Mutual Industries Style 940 0.20 0.60 mm (30 Sieve) Belton Industries, Inc. TerraTex SC 0.05 0.600 mm (30 Sieve)Webtec, Inc. US 180 0.27 0.33 mm (50 Sieve) U.S. Fabrics
180EX 1.0 0.19 mm (80 Sieve) Linq Indust. Fabrics C80NW 1.2 0.18 mm (80 Sieve Contech Const. Prod. *Filterweave 404 0.90 0.425 mm (40 Sieve) Mirafi FX-80HS 1.5 0.18 mm (80 Sieve) Carthage Mills Geotex 801 1.5 0.18 mm (80 Sieve) Propex Inc. * Geotex 2 X 2 F 0.7 0.425 mm (40 Sieve) Propex Inc. Geotex 801 1.5 0.15 mm (100 Sieve) Propex Inc. GT180 1.4 0.18 mm (80 Sieve) SKAPS Industries Mirafi 1100NPA 1.1 0.15 mm (100 Sieve) Ten Cate Geosynthetics MX275 1.5 0.18 mm (80 Sieve) Maccaferri, Inc. TerraTex NO8 1.5 0.15 mm (100 Sieve) Webtec, Inc. **Typar 3631G 0.2 0.08 mm (140 Sieve) Fiberweb US 205NW 1.2 0.18 mm (80 Sieve) U.S. Fabrics *approved when <15% of the in-situ soil tested by AASHTO T88 passes 0.075 mm **approved when =/> 15% of the in-situ soil tested by AASHTO T88 passes 0.075 mm ***approved when <50% of the in-situ soil tested by AASHTO T88 passes 0.075 mm AHTD Type 6 Shall comply with the requirements for Permanent Erosion Control, Class 2 (AASHTO M 288). This geotextile is used between energy absorbing armor systems and in the in-situ soil to prevent soil loss resulting in excessive scour and to prevent hydraulic uplift pressures causing instability of the permanent erosion control system. Product Permittivity (sec-1) AOS Manufacturer 160N 1.4 0.212 mm (70 Sieve)Mirafi 180N 1.2 0.18 mm (80 Sieve) Mirafi C80NW 1.2 0.18 mm (80 Sieve) Contech Const. Prod. EC8 1.5 0.15 mm (100 Sieve) SRW Products *Filterweave 400 0.95 0.425 mm (40 Sieve)Mirafi *Filterweave 404 0.90 0.425 mm (40 Sieve)Mirafi **Filterweave 700 0.28 0.212 mm (70 Sieve)Mirafi FX-60HS 1.3 0.212 mm (70 Sieve)Carthage Mills GT160 1.6 0.21 mm (70 Sieve) SKAPS Industries **GTF 400 E 0.57 0.17 mm (100 Sieve)Linq Indust. Fabrics **Geotex 104F 0.28 0.212 mm (70 Sieve) Propex Inc. 07/2008 QPL 625.02 Page 4AHTD Type 6 (continued) Geotex 601 1.5 0.212 mm (70 Sieve)Propex Inc. Geotex 701 1.5 0.212 mm (70 Sieve)Propex Inc. Geotex 801 1.5 0.15 mm (100 Sieve)Propex Inc. MX225 1.3 0.212 mm (70 Sieve) Maccaferri, Inc. NW6 1.5 0.18 mm (80 Sieve) SRW Products **TerraTex EP 0.28 0.212 mm (70 Sieve)Webtec, Inc. TerraTex NO6 1.5 0.212 mm (70 Sieve)Webtec, Inc. TerraTex NO7 1.5 0.212 mm (70 Sieve)Webtec, Inc. US 160NW 1.3 0.18 mm (80 Sieve) U.S. Fabrics *approved when <15% of the in-situ soil tested by AASHTO T88 passes 0.075 mm **approved when =/> 15% of the in-situ soil tested by AASHTO T88 passes 0.075 mm PavingAHTD Type 7 Shall comply with the requirements for Paving (AASHTO M 288). This geotextile is used as a paving fabric, saturated with asphalt cement, between pavement layers. Product Asphalt Retention Melting Point Manufacturer140EX 0.905 L/m2 (0.2 gal/yd2) 150° C (302° F) Linq Indust. Fabrics AOM 1.13 l/m2 (0.25 gal/yd2) 150° C (302° F) Linq Indust. Fabrics C46NW 0.905 L/m2 (0.2 gal/yd2) 150° C (300° F) Contech Const. Prod. FX-42OL 0.90 L/m2 (0.2 gal/yd2) 150° C (300° F) Carthage Mills GC140 0.90 L/m2 (0.2 gal/yd2) 150° C (300° F) SKAPS Industries Mirapave 500 1.13 l/m2 (0.25 gal/yd2) 163° C (325° F) Mirafi Petromat 4598 0.90 l/m2 (0.2 gal/yd2) 165° C (329° F) Propex Inc. TerraTex OLI 0.905 l/m2 (0.2 gal/yd2) 166° C (330° F) Webtec, Inc. SeparationAHTD Type 8 Shall comply with the requirements for Separation, Class 2 (AASHTO M288). This geotextile is used to prevent mixing of a subgrade soil and an aggregate cover material (subbase, base, select material, etc.). May also be used beneath pavements where separation of two dissimilar materials is required but water seepage through the geotextile is not a critical function. Product Permittivity (sec-1) AOS Manufacturer 150EX 1.1 0.18 mm (80 Sieve) Linq Indust. Fabrics 160N 1.4 0.212 mm (70 Sieve)Mirafi 180N 1.2 0.18 mm (80 Sieve) Mirafi 550X 0.05 0.425 mm (40 Sieve)) Mirafi 600X 0.05 0.425 mm (40 Sieve) Mirafi C250 0.05 0.425 mm (40 Sieve) Contech Const. Prod. C300 0.02 0.212 mm (100 Sieve)Contech Const. Prod. C60NW 1.72 0.14 mm (120 Sieve)Contech Const. Prod. EC8 1.5 0.15 mm (100 Sieve) SRW Products FX-60HS 1.3 0.212 mm (70 Sieve)Carthage Mills FX-66 0.06 0.212 mm (70 Sieve) Carthage Mills Geotex 250ST 0.22 0.38 mm (50 Sieve) Propex Inc. GT160 1.6 0.21 mm (70 Sieve) SKAPS Industries GTF 250 0.05 0.425 mm (40 Sieve)Linq Indust. Fabrics 07/2008 QPL 625.02 Page 5
GTF 300 0.02 0.425 mm (40 Sieve)Linq Indust. Fabrics Geotex 250ST 0.05 0.425 mm (40 Sieve) Propex Inc. Geotex 315ST 0.05 0.425 mm (40 Sieve)Propex Inc. Geotex 601 1.5 0.212 mm (70 Sieve)Propex Inc. Geotex 801 1.5 0.15 mm (100 Sieve)Propex Inc. MX225 1.3 0.212 mm (70 Sieve) Maccaferri, Inc. NW6 1.5 0.18 mm (80 Sieve) SRW Products Style 977 0.16 0.30mm (50 Sieve) Belton Industries, Inc. TerraTex GS-250 0.05 0.425 mm (40 Sieve)Webtec, Inc. TerraTex HD 0.05 0.425 mm (40 Sieve)Webtec, Inc. TerraTex NO6 1.5 0.212 mm (70 Sieve)Webtec, Inc. TNS R060 1.6 0.15 mm (100 Sieve) TNS Advanced Tech. Typar 3501G 0.77 0.16 mm (100 Sieve) Fiberweb US 160NW 2.34 0.2 mm (70 Sieve) U.S. Fabrics US 315 0.18 0.38 mm (50 Sieve) U.S. Fabrics AHTD Type 9 Shall comply with the requirements for Separation, Class 3 (AASHTO M288). This geotextile is used to prevent mixing of a subgrade soil and an aggregate cover material (subbase, base, select material, etc.). May also be used beneath pavements where separation of two dissimilar materials is required but water seepage through the geotextile is not a critical function. Product Permittivity (sec-1) AOS Manufacturer 140EX 1.1 0.21 mm (70 Sieve) Linq Indust. Fabrics 140N 1.8 0.212 mm (70 Sieve) Mirafi 150N 1.5 0.212 mm (70 Sieve)Mirafi 160N 1.4 0.212 mm (70 Sieve) Mirafi 180N 1.2 0.18 mm (80 Sieve) Mirafi 500X 0.05 0.3mm (50 Sieve) Mirafi 600X 0.05 0.425 mm (40 Sieve) Mirafi C200 0.05 0.3 mm (50 Sieve) Contech Const. Prod. C40NW 1.9 0.212 mm (70 Sieve) Contech Const. Prod. EC8 1.5 0.15 mm (100 Sieve) SRW Products FX-40HS 2.0 0.212 mm (70 Sieve) Carthage Mills FX-55 0.07 0.425 mm (40 Sieve) Carthage Mills Geotex 401 2.0 0.212 mm (70 Sieve) Propex Inc. Geotex 200ST 0.05 0.300mm (50 Sieve) Propex Inc. Geotex 451 1.8 0.212 mm (70 Sieve) Propex Inc. Geotex 501 1.7 0.212 mm (70 Sieve) Propex Inc. Geotex 801 1.5 0.15 mm (100 Sieve)Propex Inc. GT142 1.8 0.21 mm (70 Sieve) SKAPS Industries GTF200S 0.08 0.425 mm (40 Sieve)Linq Indust. Fabrics MX155 1.5 0.212 mm (70 Sieve) Maccaferri, Inc. NW6 1.5 0.18 mm (80 Sieve) SRW Products Style 1980 0.10 0.355mm (45 Sieve)Belton Industries, Inc. TerraTex GS 0.05 0.425 mm (40 Sieve)Webtec, Inc. TerraTex NO4.5 1.8 0.212 mm (70 Sieve)Webtec, Inc. 07/2008 QPL 625.02 Page 6
TerraTex NO5 1.7 0.212 mm (70 Sieve)Webtec, Inc. Typar 3401G 0.70 0.212 mm (70 Sieve) Fiberweb US 120NW 1.50 0.212 mm (70 Sieve) U.S. Fabrics StabilizationAHTD Type 10 Shall comply with the requirements for Stabilization, Class 1 (AASHTO M 288). This geotextile is used in wet, saturated conditions to provide the coincident functions of separation and filtration. In some installations, the geotextile can also provide the function of reinforcement. Product Permittivity (sec-1) AOS Manufacturer 180EX 1.0 0.18 mm (80 Sieve) Linq Indust. Fabrics C300 0.02 0.212 mm (70 Sieve) Contech Const. Prod. C80NW 1.20 0.18 mm (80 Sieve) Contech Const. Prod. FX-66 0.06 0.212 mm (70 Sieve) Carthage Mills FX-80HS 1.5 0.18 mm (80 Sieve) Carthage Mills Geotex 315ST 0.7 0.2 mm (80 Sieve) Propex Inc. Geotex 801 1.5 0.19 mm (80 Sieve) Propex Inc. GT180 1.4 0.18 mm (80 Sieve) SKAPS Industries GTF 300 0.02 0.425 mm (40 Sieve) Linq Indust. Fabrics 600X 0.05 0.425 mm (40 Sieve) Ten Cate Geosynthetics Mirafi 1100NPA 1.1 0.15 mm (100 Sieve) Ten Cate Geosynthetics MX275 1.5 0.18 mm (80 Sieve) Maccaferri, Inc. ProPex Style 2006 0.05 0.425 mm (40 Sieve) Propex Inc. Geotex 801 1.5 0.15 mm (100 Sieve) Propex Inc. TerraTex HD 0.05 0.425 mm (40 Sieve) Webtec, Inc. TerraTex NO8 1.5 0.212mm (70 Sieve) Webtec, Inc. Typar 3631G 0.2 0.08 mm (140 Sieve) Fiberweb US 205NW 1.2 0.18 mm (80 Sieve) U.S. Fabrics
07/2008 QPL 625.02 Page 7
Contact Information:
Belton Industries, Inc. Atlanta, GA 800-225-4099 Cady Industries, Inc. Pearson, GA 800-243-2451 Carthage Mills Cincinnati, OH 800-543-4430 Contech Little Rock, AR 501-758-1985 DDD Erosion Control, Inc. Ashburn, GA. 229-567-0751 Fiberweb Old Hickory, TN 615-847-7000 InterWrap Corp. Sylvester, GA. 229-777-0062 Linq Industrial Fabrics Summerville, SC 800-543-9966 Maccaferri, Inc. Lewisville, TX 972-436-2974 Mirafi Pendergrass, GA 888-795-0808 Mutual Industries, Inc. Philadelphia, PA 800-523-0888 Propex Inc. Austell, GA 800-445-7732 Propex Inc. Chattanooga, TN 800-621-0444 SKAPS Industries Pendergrass, GA 706-693-3440 SRW Products Princeton, MN 763-389-2722 Ten Cate Geosynthetics Pendergrass, GA 888-795-0808 TNS Advanced Tech. Spartanburg, SC 800-867-5181 U.S. Fabrics, Inc. Cincinnati, OH 513-271-6000 Webtec, Inc. Charlotte, NC 800-438-00271
07/2008 QPL 626.02 EROSION CONTROL MATTING Product Manufacturers Class 1 Matting Biomac S1 Maccaferri, Inc. Carthage Vegetation Net Carthage Mills EcoCoir-4000 Eastern Products, Inc. EcoCoir-9000 Eastern Products, Inc. Excel SR-1 Western Excelsior Corp. Excel SR-1 All Natural Western Excelsior Corp. Excel SS-2 Western Excelsior Corp. Excel SS-2 All Natural Western Excelsior Corp. Flexterra-Flexible Growth Medium PROFILE Products LLC Landlok S1 Propex Inc. Landlok S2 Propex Inc. North American Green S75 North American Green
North American Green SC150 North American Green Robex Shield RS-1 Robex, LLC Robex Shield RS-2 Robex, LLC Terrajute Webtec, Inc. WinterStraw SNG Winters Excelsior Company, Inc. WS05 Greenfix America
Anti-Wash/Geojute Belton Industries, Inc. Biomac S2 Maccaferri, Inc. Biomac S2-B Maccaferri, Inc. Biomac SC Maccaferri, Inc. Biomac SC-B Maccaferri, Inc. Biomac C Maccaferri, Inc. Biomac C-B Maccaferri, Inc. CF072RR Greenfix America CF072B Greenfix America CFS072B Greenfix America CFS072R Greenfix America C-Jute Contech Construction Products Contech Excelsior Std Grade Contech Construction Products Contech Excelsior Std Plus Contech Construction Products Contech Excelsior Super Plus Contech Construction Products Curlex I American Excelsior Company DeKoWe 700 Belton Industries, Inc. DeKoWe 900 Belton Industries, Inc. DuraGuard C1 Erosion Control Systems, Inc. Earth Lock Erosion Control Systems, Inc. 07/2008 QPL 626.02 Page 2
EcoCoir-7000 Eastern Products, Inc. Everhold XL1 Erosion Control Systems, Inc. Everhold XL2 Erosion Control Systems, Inc. Excel CC-4 Western Excelsior Corp. Excel CC-4 All Natural Western Excelsior Corp. Excel R-1 Western Excelsior Corp. Excel R-1 All Natural Western Excelsior Corp. Excel S-2 Western Excelsior Corp. Excel S-2 All Natural Western Excelsior Corp. Excel SD-3 Western Excelsior Corp. Hivelocity Curlex American Excelsior Company Landlok 407 Propex Inc. Landlok CS2 Propex Inc. Landlok SuperGro Propex Inc. North American Green C125 North American Green North American Green C350 North American Green North American Green SC150 North American Green North American Green SC250 North American Green TRM C-35 Contech Const. Prod. Winters Choice Winters Excelsior Company, Inc. WintersCoir Winters Excelsior Company, Inc. WinterStraw HVG Winters Excelsior Company, Inc. WS052 Greenfix America WS072 Greenfix America WS072B Greenfix America
Excel PP5-10 Western Excelsior Corp. Excel PP5-12 Western Excelsior Corp. Greenstreak Pec-Mat Greenstreak, Inc. Landlok 450 Propex Inc., Inc. Miramat TM8 Mirafi North American Green P300 North American Green North American Green SC250 North American Green North American Green C350 North American Green Recyclex – TRM American Excelsior Company TRM C-45 Contech Const. Prod.
07/2008 QPL 626.02 Page 3
(a) Class 1 Matting. Class 1 matting acts to promote seed germination and control erosion on slopes of 3:1 or flatter under all soil conditions. In general, this class of matting includes natural, synthetic, or synthetic and natural matting; wood fiber mulches (applied at a minimum of 3.4 mton/hectare, 1.5 tons/acre, with a tackifier); and heavily applied straw mulch (minimum of 9 mton/hectare, 4 tons/acre, with a tackifier). The biodegradable life (include UV stable) of the matting shall be a minimum of 6 months. (b) Class 2 Matting. Class 2 matting acts to control erosion as a liner for channels and ditches and on slopes of 2:1 or flatter under all soil conditions. In general, this class of matting includes woven matting made of natural, synthetic, or synthetic and natural materials. The biodegradable life (include UV stable) of the matting shall be a minimum of 12 months. (c) Class 3 Matting. Class 3 matting acts to control erosion as a liner for channels and ditches. This class is for use in areas of high susceptibility to erosion. Class 3 matting shall have a biodegradable (include UV stable) life of 5 years and the matting shall be able to withstand minimum limiting shear stresses of .096 kN/m2 (2.0 lbs/ft2) over bare soil for 50 hours.
07/2008 QPL 626.02 Page 4 Contact Information:
07/2008 QPL 634.03 SILICONE JOINT SEALER-FOR USE IN VERTICAL CURB & GUTTER JOINTS PRODUCT/PRIMER COLOR MANUFACTURER 790 Silicone Building Sealant Black Dow-Corning Corp. 795 Silicone Building Sealant Black 4291 Communications Dr. 888 Highway Joint Sealant Gray Norcross, GA. 30093 (404)923-3818
Aluminum Gray 889 Valley Park Drive Shakopee, MN. 55379 952-496-6000 Pecora 864 Silicone Black/Gray Pecora Corp. Pecora 895 Silicone Gray 165 Wambold Road Harleysville, PA. 19438 1-800-523-6680 Silpruf SCS 2003 Black General Electric Co. Silglaze II SCS 2803 Black Silicone Product Div. Waterford, N.Y. 12188 (518)237-3330 NOTE: It is important that these sealers be applied in accordance with the manufacturer's recommendations. METHOD OF DOCUMENTATION OF ACCEPTANCE: By brand and manufacturer. The following procedure must be followed in acquiring approval of materials to be added to the Qualified Products List. Sample(s) of the material along with product information shall be submitted to the Materials Division for evaluation. 07/2008 QPL 637.02 MAILBOX SUPPORTS PRODUCT (BRAND) MANUFACTURER Model #037 Mailbox Support Friend Innovations 216 North Second Avenue Virginia, Minnesota 55792 218-741-7777 NEX Model FHWA A-S S-Square Tube Products Model FHWA A-D 5495 E. 69th Avenue Commerce City, CO 80022-1952 888-267-6463 POZ-LOC Northwest Pipe Company (UPS Model-Universal Post Support) P.O. Box 2002 Houston, TX 77252-2002
Model 20-D 800 Wall Street Elm Grove, WI 53122 800-236-0112 Method of Documentation of Acceptance: By brand and manufacturer. 07/2008 QPL 637.02 Page 2
07/2008 QPL 638.02 ALUMINUM EPOXY PAINT Product Manufacturers Amerlock 400AL Ameron 201 N. Berry St. Brea, CA 92622 (714)529-1951 Bar-Rust 239 Aluminum Epoxy Devoe Coatings Company 13531 South Choctaw Baton Rouge, LA 70815 (504)272-2470 Carbomastic 90 Aluminum Carboline 350 Hanley Industrial Ct. St.Louis, MO. 63144-1599 (314)644-1000 Epoxy Mastic Aluminum II Sherwin Williams Company 417 Byrd Street Little Rock, Arkansas 72202 (501) 375-7371 Interseal 670 HS International Paint, Inc. 6001 Antoine Drive Houston, Texas 77901
2503 West 11th St. Houston, TX 77008 (713)861-6192 1-800-333-7157
2. The manufacturer shall provide a sample, product information, and Material Safety Data Sheets. 3. When deemed necessary by the Materials Engineer and at a frequency determined by same, samples shall be taken and tested on a random basis. 07/2008 QPL 638.02 Page 2
07/2008 QPL 641.02 Cast-in-Place Tactile Panels (ADA Detectable Warning) PRODUCT (BRAND) MANUFACTURER ADATile ADA Solutions Cast-in-Place Paver Units P.O. Box 3 1.67” & 2.35” Dome Spacing North Billerica, Massachusetts 01862 (Yellow only) 800-372-0519
Cast-in-Place Paver (Replaceable)Units 1.67” & 2.35” Dome Spacing (Yellow only) Armor-Tile Tactile Systems Engineered Plastics Inc. Cast-in-Place Tiles 300 International Drive, Ste. 100 (Yellow only) Williamsville, NY 14221 800-682-2525 Method of Documentation of Acceptance: By brand and manufacturer. Resident Engineer should verify the panels used meet the dimensional requirements of the plans. Procedure for Approval: Cast-in-place tactile panels shall meet the requirements of Subsection 641.02 of the Department’s Standard Specifications for HIGHWAY CONSTRUCTION, Edition 2003 and Standard Drawing WR-1 and WR-2. Note: The panels shall also be subject to review by the Department’s Roadway Design Division. Samples of cast-in-place tactile panels submitted for approval shall be accompanied by product literature and installation instructions. After approval for inclusion in the Qualified Products List, samples may be taken at random from shipments for testing. Any deviation in material and/or performance from the original sample may be sufficient reason to discontinue acceptance of the material from the manufacturer. Determination of this shall be by the Materials Engineer. 07/2008 QPL 645.02
Directory: contracts contracts -> License agreement contracts -> License agreement contracts -> Introduction 5 A. Remedies for breach 5 contracts -> Program opportunity notice contracts -> Pon-14-308 Addendum 18 June 27, 2016 Federal Cost Share Under the Electric Program Investment Charge contracts -> Contracts – prof. Gillette – fall 2004 contracts -> Sfoc flight operations systems responsibilities post transition of mcc and ips to csoc contracts -> Dealer/Distributor Locations contracts -> Gwu school of Law Professor Swaine Spring 2013 Download 2.84 Mb. Share with your friends:
|