CD registered
|
Period from 01 July to 31 July 2015
|
These documents are currently under consideration in the technical committee.
|
They have been registred at the Central Secretariat.
|
PC 280
|
|
Management Consultancy
|
ISO/CD 20700
|
|
Management consultancy
|
TC 2
|
|
Fasteners
|
ISO/DTR 20491
|
|
Fundamentals of Hydrogen Embrittlement in Steel Fasteners
|
TC 21
|
|
Equipment for fire protection and fire fighting
|
ISO/CD 6182-12
|
|
Fire protection — Automatic sprinkler systems — Part 12: Requirements and test methods for grooved-end components for steel pipe systems
|
TC 23
|
|
Tractors and machinery for agriculture and forestry
|
ISO 5395-2:2013/CD Amd 2
|
|
Garden equipment — Safety requirements for
combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers — Amendment 2: Cutting means enclosure guards
|
ISO 5395-3:2013/CD Amd 2
|
|
Garden equipment — Safety requirements for
combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator — Amendment 2: Cutting means enclosure guards
|
TC 29
|
|
Small tools
|
ISO/DTS 13399-70
|
|
Cutting tool data representation and exchange — Part 70: Graphical data layout — Layer settings for tooldesigns
|
ISO/CD 3364
|
|
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
|
TC 34
|
|
Food products
|
ISO/CD 2292
|
|
Cocoa beans — Sampling
|
TC 39
|
|
Machine tools
|
ISO 10791-7:2014/CD Amd 1
|
|
Test conditions for machining centres — Part 7: Accuracy of finished test pieces — Amendment 1
|
TC 44
|
|
Welding and allied processes
|
ISO/CD 13916
|
|
Welding — Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
|
ISO/CD 15609-1
|
|
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding
|
ISO/CD 17660-1
|
|
Welding — Welding of reinforcing steel — Part 1: Load-bearing welded joints
|
ISO/CD 17660-2
|
|
Welding — Welding of reinforcing steel — Part 2: Non load-bearing welded joints
|
TC 58
|
|
Gas cylinders
|
ISO/CD 20475
|
|
Gas cylinders — Bundles of cylinders — Periodic inspection and testing
|
TC 61
|
|
Plastics
|
ISO/CD 9370
|
|
Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
|
ISO/CD 19699-1
|
|
Plastics — Superabsorbent resin — Cross-linked porous sodium polyacrylate for absorbing blood — Part 1: Test methods
|
ISO/CD 19699-2
|
|
Plastics — Superabsorbent resin — Cross-linked porous sodium polyacrylate for absorbing blood — Part 2: General requirements
|
TC 69
|
|
Applications of statistical methods
|
ISO/CD 11843-7
|
|
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
|
ISO/CD 16355-2
|
|
Application of statistical and related methods to New technology and Product Development Process — Part 2: Acquisition of Non-quantitative VOC or VOS
|
ISO/CD 16355-4
|
|
Application of statistical and related methods to New technology and Product Development Process — Part 4: Analysis of Non-Quantitative and Quantitative VOC/VOS
|
TC 71
|
|
Concrete, reinforced concrete and pre-stressed concrete
|
ISO/CD 19595
|
|
Natural aggregates for concrete
|
ISO/CD 19596
|
|
Admixtures for concrete
|
ISO/DTS 16774-2
|
|
Test Methods for repair materials for water-leakage cracks in concrete structures — Part 2: Test method for chemical resistance
|
ISO/DTS 16774-3
|
|
Test Methods for repair materials for water-leakage cracks in concrete structures — Part 3: Test method for water (washed out) resistance
|
ISO/DTS 16774-4
|
|
Test Methods for repair materials for water-leakage cracks in concrete structures — Part 4: Test method for adhesion on the wet substrate
|
TC 76
|
|
Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
|
ISO/CD 8536-6
|
|
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
|
TC 87
|
|
Cork
|
ISO/CD 633
|
|
Cork — Vocabulary
|
TC 96
|
|
Cranes
|
ISO/CD 18467
|
|
Cranes — Safety requirements for offshore cranes
|
TC 107
|
|
Metallic and other inorganic coatings
|
ISO/CD 19496-1
|
|
Vitreous and porcelain enamels - Terminology — Part 1: Terms and definitions
|
ISO/CD 19496-2
|
|
Vitreous and porcelain enamels — Terminology — Part 2: Visual representations and descriptions
|
ISO/CD 28706-2
|
|
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
|
TC 120
|
|
Leather
|
ISO/CD TR 2822-2
|
|
Raw cattle hides and calf skins — Part 2: Guidelines for grading on the basis of mass
|
TC 130
|
|
Graphic technology
|
ISO/CD 19594
|
|
Page pull test to determine book binding quality
|
TC 131
|
|
Fluid power systems
|
ISO/CD 6164
|
|
Hydraulic fluid power — Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
|
TC 134
|
|
Fertilizers and soil conditioners
|
ISO/CD 19670
|
|
Fertilizers and soil conditioners — Urea aldehyde slow release fertilizer — General requirements
|
ISO/CD 19745
|
|
Determination of Crude (Free) water content of Ammoniated Phosphate products — DAP, MAP — by gravimetric vacuum oven at 50 °C
|
ISO/CD 19747
|
|
Determination of Soluble Silicon Concentrations in Nonliquid Fertilizer Materials
|
ISO/CD 19822
|
|
Determination of Humic and Fulvic Acids in Commercial Solid and Liquid Humic Products using Alkaline Extraction, Hydrophobic Adsorbent Resin and Gravimetric Determination
|
TC 138
|
|
Plastics pipes, fittings and valves for the transport of fluids
|
ISO/CD 11298-2
|
|
Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes
|
TC 146
|
|
Air quality
|
ISO/CD 20581
|
|
Workplace air — General requirements for the performance of procedures for the measurement of chemical agents
|
TC 156
|
|
Corrosion of metals and alloys
|
ISO/CD 18897
|
|
Corrosion of metals and alloys — Standard test method for particle-free erosion corrosion of metallic materials by jet-in-slit
|
ISO/CD 20728
|
|
Corrosion of metal and alloys — Determination of resistance of magnesium alloys to stress corrosion cracking
|
TC 172
|
|
Optics and photonics
|
ISO/CD 13666
|
|
Ophthalmic optics — Spectacle lenses — Vocabulary
|
ISO/CD 11553-1
|
|
Safety of machinery — Laser processing machines — Part 1: General safety requirements
|
ISO/CD 11553-2
|
|
Safety of machinery — Laser processing machines — Part 2: Safety requirements for hand-held laser processing devices
|
TC 201
|
|
Surface chemical analysis
|
ISO/DTR 19693
|
|
Surface chemical anlysis — Characterization of substrates for biosensing application
|
TC 206
|
|
Fine ceramics
|
ISO/CD 14705
|
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature
|
ISO/CD 18753
|
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pyknometer
|
TC 215
|
|
Health informatics
|
ISO/DTS 16843-1
|
|
Health Informatics — Categorial structures for representation of acupuncture — Part 1: Acupuncture points
|
ISO/DTS 20443
|
|
Health informatics — Identification of Medicinal Products — Implementation Guide for ISO 11615 Data elements and structures for the unique identification and exchange of regulated medicinal product information
|
ISO/DTS 20451
|
|
Health informatics — Identification of medicinal products — implementation guide for ISO 11616 data elements and structures for the unique identification and exchange of regulated pharmaceutical product information
|
TC 229
|
|
Nanotechnologies
|
ISO/DTR 18196
|
|
Nanotechnologies — Measurement method matrix for manufactured nano-objects
|
ISO/DTS 80004-11
|
|
Nanotechnologies — Vocabulary — Part 11: Nanolayer, nanocoating, nanofilm, and related terms
|
TC 249
|
|
Traditional chinese medicine
|
ISO/CD 19610
|
|
Traditional Chinese medicine — Requirements for industrial manufacturing process of red ginseng
|
ISO/CD 19824
|
|
Traditional Chinese Medicine — Schisandra Chinensis seeds and seedlings
|
TC 269
|
|
Railway applications
|
ISO/CD 19659-1
|
|
Railway Applications - Heating, Ventilation and Air Conditioning Systems for Rolling Stock — Part 1: Terms and definitions
|
JTC 1
|
|
Information technology
|
ISO/IEC 10373-6/PDAM 4
|
|
Identification cards — Test methods — Part 6: Proximity cards — Amendment 4: Conformance test plan
|
ISO/IEC PDTR 19249
|
|
Catalogue of architectural and design principles for secure products, systems, and applications
|
ISO/IEC CD 19592-2
|
|
Information technology — Security techniques — Secret sharing — Part 2: Fundamental mechanisms
|
ISO/IEC CD 29003
|
|
Information technology — Security techniques — Identity proofing
|
ISO/IEC 14496-27:2009/PDAM 7
|
|
Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amendment 7: Printing material and 3D graphics coding for browsers conformance
|
ISO/IEC 23008-3/PDAM 3
|
|
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 3: 3D audio — Amendment 3: MPEG-H 3D Audio Phase 2
|
ISO/IEC CD 30114-1
|
|
Information technology — Extensions of Office Open XML File Formats — Part 1: Guidelines
|
ISO/IEC PDTR 38503
|
|
Information technology — governance of IT — Guidance on the audit of the governance of IT
|