2. section (Continued) 6 Call Layer 3 Processing


Mobile Station Order/Message Response Substate



Download 1.98 Mb.
Page8/34
Date19.10.2016
Size1.98 Mb.
#3567
1   ...   4   5   6   7   8   9   10   11   ...   34

2.6.3.4 Mobile Station Order/Message Response Substate


In this substate, the mobile station sends a message that is a response to a message received from the base station. If the base station responds to the mobile station’s message with an authentication request, the mobile station responds in this substate.

Upon entering the Mobile Station Order/Message Response Substate, the mobile station shall send the response message.

If this substate was entered with a service release message response with success indication, the mobile station shall send a Service Release Response Message to the base station. The mobile station shall set the SUCCESS_IND field to ‘1’.

If this substate was entered with a service release message response with failure indication, the mobile station shall send a Service Release Response Message to the base station. The mobile station shall set the SUCCESS_IND field to ‘0’.

While in this substate, the mobile station shall monitor the Paging Channel. If the mobile station declares a loss of the Paging Channel (see 2.6.2.1.1.4), the mobile station shall perform the following:

• If PACAs is equal to enabled, the mobile station shall set PACAs to disabled and PACA_CANCEL to ‘0’, shall disable the PACA state timer, and should indicate to the user that the PACA call has been canceled.

• The mobile station shall declare an access attempt failure and update its registration variables as specified in 2.6.5.5.3.2.

• The mobile station shall disable its transmitter.

• The mobile station shall enter the Mobile Station Idle State.

If the mobile station receives confirmation of delivery of any message sent by the mobile station in this substate, it shall send a response in this substate if required, and shall then enter the Mobile Station Idle State.

If PACAs is equal to enabled, the mobile station shall set PACA_CANCEL to ‘1’ when the user directs the mobile station to cancel a PACA call.

The following directed messages and orders can be received. If any field value of the message or order is outside its permissible range, the mobile station may send a Mobile Station Reject Order with ORDQ equal to ‘00000100’ (message field not in valid range).

1. Authentication Challenge Message: The mobile station shall respond to the message as specified in 2.3.12.1.4, regardless of the value of AUTHs.

2. Base Station Challenge Confirmation Order: The mobile station shall respond to the message as specified in 2.3.12.1.5.

3. Data Burst Message

4. Feature Notification Message

5. Local Control Order

6. Lock Until Power-Cycled Order: The mobile station shall disable its transmitter and record the reason for the Lock Until Power-Cycled Order in the mobile station’s semi-permanent memory (LCKRSN_Ps-p equals the least significant four bits of ORDQr). The mobile station should notify the user of the locked condition. The mobile station shall enter the System Determination Substate of the Mobile Station Initialization State with a lock indication (see 2.6.1.1), and shall not enter the System Access State again until after the next mobile station power-up or until it has received an Unlock Order. This requirement shall take precedence over any other mobile station requirement specifying entry to the System Access State.

7. Maintenance Required Order: The mobile station shall record the reason for the Maintenance Required Order in the mobile station’s semi-permanent memory (MAINTRSNs p equals the least significant four bits of ORDQr). The mobile station shall remain in the unlocked condition. The mobile station should notify the user of the maintenance required condition.

8. Registration Accepted Order: If ORDQr = ‘00000101’, the mobile station shall set ROAM_INDIs = ROAM_INDIr and should display the roaming condition.

9. Registration Rejected Order: This order indicates that normal service is not available on this system. The mobile station shall disable the full-TMSI timer. If the received order specifies to delete the TMSI (ORDQ = ‘00000100’), the mobile station shall set all the bits of the TMSI_CODEs-p to ‘1’. The mobile station shall enter the System Determination Substate of the Mobile Station Initialization State with a registration rejected indication (see 2.6.1.1).


  1. Service Redirection Message: The mobile station shall process the message as follows:

  • If the mobile station is directed to an unsupported operation mode or band class, the mobile station shall respond with a Mobile Station Reject Order with ORDQ equal to ‘00000110’ (message requires a capability that is not supported by the mobile station).

  • If DELETE_TMSIr is equal to ‘1’, the mobile station shall set all the bits of TMSI_CODEs-p to ‘1’. The mobile station shall disable the full-TMSI timer.

  • The mobile station shall set RETURN_IF_FAILs = RETURN_IF_FAILr.

• If RECORD_TYPEr is equal to ‘00000000’, the mobile station shall enter the System Determination Substate of the Mobile Station Initialization State with an NDSS off indication (see 2.6.1.1); otherwise, the mobile station shall store the redirection record received in the message as REDIRECT_RECs and shall enter the System Determination Substate of the Mobile Station Initialization State with a redirection indication (see 2.6.1.1).

11. SSD Update Message: The mobile station shall respond to the message as specified in 2.3.12.1.5.

12. Status Request Message: The mobile station shall disable the System Access State timer and respond to the message. If P_REV_IN_USEs is less than or equal to three, the mobile station shall respond with a Status Response Message. If P_REV_IN_USEs is greater than three, the mobile station shall respond with an Extended Status Response Message. If the message does not specify any qualification information (QUAL_INFO_TYPEr is equal to ‘00000000’), the mobile station shall include the requested information records in the response. If the message specifies a band class (QUAL_INFO_TYPEr is equal to ‘00000001’), the mobile station shall only include the requested information records for the specified band class (BAND_CLASSr) in the response. If the message specifies a band class and an operating mode (QUAL_INFO_TYPEr is equal to ‘00000010’), the mobile station shall only include the requested information records for the specified band class (BAND_CLASSr) and operating mode (OP_MODEr) in the response. If the message specifies a band class or a band class and an operating mode which is not supported by the mobile station, the mobile station shall send a Mobile Station Reject Order with ORDQ set to ‘00000110’ (message requires a capability that is not supported by the mobile station). If the response to this message exceeds the allowable length, the mobile station shall send a Mobile Station Reject Order with ORDQ set to ‘00001000’ (response message would exceed the allowable length). If the message specifies an information record which is not supported by the mobile station for the specified band class and operating mode, the mobile station shall send a Mobile Station Reject Order with ORDQ set to ‘00001001’ (information record is not supported for the specified band class and operating mode).

13. TMSI Assignment Message: The mobile station shall store the TMSI zone and code as follows:



  • The mobile station shall store the length of the TMSI zone field by setting ASSIGNING_TMSI_ZONE_LENs-p to TMSI_ZONE_LENr,

  • The mobile station shall store the assigning TMSI zone number by setting the ASSIGNING_TMSI_ZONE_LENs-p least significant octets of ASSIGNING_TMSI_ZONEs-p to TMSI_ZONEr, and

  • The mobile station shall store the TMSI code by setting TMSI_CODEs-p to TMSI_CODEr.

The mobile station shall set the TMSI expiration time by setting TMSI_EXP_TIMEs-p to TMSI_EXP_TIMEr. The mobile station shall disable the full-TMSI timer. The mobile station shall then respond with a TMSI Assignment Completion Message within T56m seconds.

  1. Any other message: If the mobile station receives any other message specified in Table 3.7.2.3-1, it shall ignore all Layer 3 fields. The mobile station shall ignore all other messages.


Download 1.98 Mb.

Share with your friends:
1   ...   4   5   6   7   8   9   10   11   ...   34




The database is protected by copyright ©ininet.org 2024
send message

    Main page