2017 Rules Red indicates take a closer look or a change
Download 3 Mb.
|
ALLOWABLE CARS1. Any fabricated tube-frame race car, perimeter or offset. 2. No Jeeps, dune buggies, or convertibles. 3. No all wheel drive, (AWD) cars. BODIES1. All cars must have complete bodies with no sharp edges; fabricated of nonferrous materials that resembles (i.e. front fenders, nose and hood) a late model stock car complete with a nose and tail panel. Outlaw bodies are permitted but must have round edges, nose, fenders and hood that conform to the late model look. Roof must have rounded edges. Tails must cover the back of the car from the bottom of the spoiler to the top of the bumper. OUTLAW BODY  
2. All window materials, front, rear, and sides must be of polycarbonate, (Lexan) material. No acrylic, (Plexiglas) material. 3. All bodies must be brightly painted and have numbers on both sides, top, nose and tail. 4. Hood scoop/air cleaner may not be higher than 5 inches. 5. Maximum rear spoiler height is 8 inches measured along the spoiler surface from the spoiler base to the spoiler top edge. Aluminum may be used up to a spoiler height of 5 inches. Polycarbonate, (Lexan) must be used if taller than 5 inches to maximum length. No acrylic, (Plexiglas) material. Spoiler side panels may not extend past the rear edge of the wheel well. 6. Firewalls, solid panels with no gaps or holes, of 24-gage steel or 0.065” thick aluminum, minimum, required between driver and engine, fuel cell, battery, and radiator. Interior trim panels beyond firewalls may be of steel or aluminum less than minimum thickness required for firewalls. 7. Body wheel wells must cover all four (4) tires.
Download 3 Mb. Share with your friends:
|