{ FOR_SCH_NUM_BITS_IDXr }

+ otherwise the mobile station shall set (initialize) N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r] = {FOR_SCH_NUM_BITS_IDX_r} and for i=1, …, FOR_SCH_NUM_BITS_IDX_r the mobile station shall add FOR_SCH_NUM_BITS_IDX_r - VAR_FSCH_RATE_OFFSET_s[FOR_SCH_ID_r][FOR_SCH_NUM_BITS_IDX_r][i] to the set specified by N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r]

– If USE_FLEX_NUM_BITS_s is equal to '0' or if USE_FLEX_NUM_BITS_s is equal to '1' and FSCH_NBIT_TABLE_ID_s[FOR_SCH_ID_r] is equal to ‘0000’, then the mobile station shall set N_FSCH_BITS_SET_s[FOR_SCH_ID_r][SCCL_INDEX_r], the set of number of information bits per frame as follows.

– If USE_FLEX_NUM_BITS_s is equal to '1' and FSCH_NBIT_TABLE_ID_s[FOR_SCH_ID_r] is not equal to ‘0000’, then

+ the mobile station shall set N_FSCH_BITS_SET_s[FOR_SCH_ID_r][SCCL_INDEX_r], the set of number of information bits per frame as follows.
The i^th member of the set N_FSCH_BITS_SET_s[FOR_SCH_ID_r][SCCL_INDEX_r] is equal to NUM_BITS_s[FSCH_NBIT_TABLE_ID_s[FOR_SCH_ID_r]] [N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r][i]], where N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r][i] denotes the i^th member of the set N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r] and,

+ the mobile station shall set FSCH_CRC_LEN_SET_s[FOR_SCH_ID_r][SCCL_INDEX_r], the set of number CRC bits per frame as follows.

+ If SCH_INCL_r is equal to ‘1’ and NUM_REV_SCH is not equal to ‘00000’, for all the NUM_REV_SCH occurrences, the mobile station shall perform the following:

 Set REV_SCH_NUM_BITS_IDX_s[REV_SCH_ID_r] to REV_SCH_NUM_BITS_IDX_r.

 Set REV_WALSH_ID_s [REV_SCH_ID_r][REV_SCH_NUM_BITS_IDX_s] to REV_WALSH_ID_r.

+ For each member of the Active Set included in the message, the mobile station shall perform the following:

 If SRCH_OFFSET_INCL_r equals ‘1’, set the SRCH_OFFSET field of PILOT_REC to SRCH_OFFSET_r; otherwise, set the SRCH_OFFSET field of PILOT_REC to ‘000’.

 Set ADD_PILOT_REC_INCL to ADD_PILOT_REC_INCL_r.

 If ADD_PILOT_REC_INCL_r equals ‘1’, the mobile station shall also perform the following:

à Set the PILOT_REC_TYPE field of PILOT_REC to PILOT_REC_TYPE_r.

à If PILOT_REC_TYPE_r is equal to ‘000’, the mobile station shall set the TD_POWER_LEVEL field of PILOT_REC to TD_POWER_LEVEL_r and set the TD_MODE field of NGHBR_PILOT_REC to TD_MODE_r.

à If PILOT_REC_TYPE_r is equal to ‘001’, the mobile station shall:

– Set the AUX_PILOT_QOF field of PILOT_REC to QOF_r.

– Set the AUX_PILOT_WALSH_CODE field of PILOT_REC to AUX_PILOT_WALSH_r with the Walsh Code length specified by WALSH_LENGTH_r.

à If PILOT_REC_TYPE_r is equal to ‘010’, the mobile station shall:

– Set the AUX_PILOT_TD_QOF field of PILOT_REC to QOF_r.

– Set the AUX_PILOT_WALSH_CODE field of PILOT_REC to AUX_WALSH_r with the Walsh Code length specified by WALSH_LENGTH_r.

– Set the AUX_TD_POWER_LEVEL field of PILOT_REC to AUX_TD_POWER_LEVEL_r.

– Set the TD_MODE field of PILOT_REC to TD_MODE_r.

• 
  If PILOT_REC_TYPE_r is equal to ‘011’, the mobile station shall:
  

• 
  Set the SR3_PILOT_POWER1 field of PILOT_REC to SR3_PILOT_POWER1_r.
  
• 
  Set the SR3_PILOT_POWER2 field of PILOT_REC to SR3_PILOT_POWER2_r.
  

• 
  If PILOT_REC_TYPE_r is equal to ‘100’, the mobile station shall:
  

• 
  Set the SR3_PILOT_POWER1 field of PILOT_REC to SR3_PILOT_POWER1_r.
  
• 
  Set the SR3_PILOT_POWER2 field of PILOT_REC to SR3_PILOT_POWER2_r.
  

• 
  Set the AUX_PILOT_WALSH_CODE field of PILOT_REC to AUX_PILOT_WALSH_r with the Walsh Code length specified by WALSH_LENGTH_r.
  
• 
  If ADD_INFO_INCL1_r is equal to ‘1’, set the AUX_PILOT_QOF1 field of PILOT_REC to QOF1_r and set the AUX_PILOT_WALSH_CODE1 field of PILOT_REC to AUX_PILOT_WALSH1_r with the Walsh Code length specified by WALSH_LENGTH1_r; otherwise, set the AUX_PILOT_QOF1 field of PILOT_REC to QOF_r and set the AUX_PILOT_WALSH_CODE1 field of PILOT_REC to AUX_PILOT_WALSH_r with the Walsh Code length specified by WALSH_LENGTH_r.
  
• 
  If ADD_INFO_INCL2_r is equal to ‘1’, set the AUX_PILOT_QOF2 field of PILOT_REC to QOF2_r and set the AUX_PILOT_WALSH_CODE2 field of PILOT_REC to AUX_PILOT_WALSH2_r with the Walsh Code length specified by WALSH_LENGTH2_r; otherwise, set the AUX_PILOT_QOF2 field of PILOT_REC to QOF_r and set the AUX_PILOT_WALSH_CODE2 field of PILOT_REC to AUX_PILOT_WALSH_r with the Walsh Code length specified by WALSH_LENGTH_r.
  

 If SCH_INCL_r is equal to ‘1’ and NUM_SCH is equal to ‘00000’, the mobile station shall delete the corresponding pilot from the all entries of the corresponding Supplemental Channel.

 If SCH_INCL_r is equal to ‘1’ and NUM_SCH is not equal to ‘00000’, for each Supplemental Channel included in this record, the mobile station shall:

à If PILOT_INCL is equal to ‘0’, then the mobile station shall delete the corresponding pilot from the Active Set of Supplemental Channel for the corresponding SCCL_INDEX_r.

à If PILOT_INCL is equal to ‘1’, then for each Supplemental Channel included in this record, the mobile station shall set PILOT_PN_s [FOR_SCH_ID_r][SCCL_INDEX_r][i] to PILOT_PN_r, QOF_ID_s[FOR_SCH_ID_r][SCCL_INDEX_r][i] to QOF_MASK_ID_SCH_r, and FOR_SCH_CC_INDEX_s[FOR_SCH_ID_r][SCCL_INDEX_r][i] to CODE_CHAN_SCH_r.

• 
  If PILOT_INCL is equal to ‘1’ and CCSH_INCLUDED is set to ‘1’, then for each Supplemental Channel included in this record, the mobile station shall set CCSH_ENCODER_TYPE_s[FOR_SCH_ID_r][SCCL_INDEX_r][i] to CCSH_ENCODER_TYPE_r.
  
• 
  If PILOT_INCL is equal to ‘1’ and CCSH_INCLUDED is set to ‘0’, then for each Supplemental Channel included in this record, the mobile station shall set CCSH_ENCODER_TYPE_s[FOR_SCH_ID_r][SCCL_INDEX_r][i] to ‘0’ (default Turbo Encoder type).
  

+ If CCSH_INCLUDED is equal to ‘1’, the mobile station shall perform the following:

 If CCSH_ENCODER_ACTION_TIME_r is not received, the mobile station shall apply each CCSH_ENCODER_TYPE_s at the action time of the message.

+ If 3X_FCH_INFO_INCL_r equals ‘1’, for each included member of the Active Set, the mobile station store the following:

• 
  If 3X_FCH_LOW_INCL_r equals ‘1’, set the QOF_MASK_ID_FCH_LOW field to QOF_MASK_ID_FCH_LOW_r and the CODE_CHAN_FCH_LOW field to CODE_CHAN_FCH_LOW_r. Otherwise, set the QOF_MASK_ID_FCH_LOW field to QOF_MASK_ID_FCH_r and the CODE_CHAN_FCH_LOW to CODE_CHAN_FCH_r.
  
• 
  If 3X_FCH_HIGH_INCL_r equals ‘1’, set the QOF_MASK_ID_FCH_HIGH field to QOF_MASK_ID_FCH_HIGH_r and the CODE_CHAN_FCH_HIGH field to CODE_CHAN_FCH_HIGH_r. Otherwise, set the QOF_MASK_ID_FCH_HIGH field to QOF_MASK_ID_FCH_r and the CODE_CHAN_FCH_HIGH to CODE_CHAN_FCH_r.
  
• 
  If 3X_SCH_INFO_INCL_r equals ‘1’, for each Supplemental Channel included, the mobile station store the following:
  

• 
  If 3X_SCH_LOW_INCL_r equals ‘1’, set the QOF_ID_SCH_LOW_s [FOR_SCH_ID_r][SCCL_INDEX_r][i] to QOF_MASK_ID_SCH_LOW_r and the FOR_SCH_CC_INDEX_LOW[FOR_SCH_ID_r][SCCL_INDEX_r][i] field to CODE_CHAN_SCH_LOW_r. Otherwise, set QOF_ID_SCH_LOW_s[FOR_SCH_ID_r][SCCL_INDEX_r][i] to QOF_MASK_ID_SCH_r, and FOR_SCH_CC_INDEX_LOW_s[FOR_SCH_ID_r][SCCL_INDEX_r][i] to CODE_CHAN_SCH_r.
  
• 
  If 3X_SCH_HIGH_INCL_r equals ‘1’, set the QOF_ID_SCH_HIGH_s [FOR_SCH_ID_r][SCCL_INDEX_r][i] to QOF_MASK_ID_SCH_HIGH_r and the FOR_SCH_CC_INDEX_HIGH[FOR_SCH_ID_r][SCCL_INDEX_r][i] field to CODE_CHAN_SCH_HIGH_r. Otherwise, set QOF_ID_SCH_HIGH_s[FOR_SCH_ID_r][SCCL_INDEX_r][i] to QOF_MASK_ID_SCH_r, and FOR_SCH_CC_INDEX_HIGH_s[FOR_SCH_ID_r][SCCL_INDEX_r][i] to CODE_CHAN_SCH_r.
  

+ The mobile station shall delete all pilots that are not listed in the NUM_PILOTS field from the Active Set.

+ The mobile station shall delete all pilots that are not listed in the Active Set from the Active Set of the Supplemental Channel for the Forward Supplemental Channel Assignment (if any). If these deleted pilots include all pilots in the Active Set of the Supplemental Channel, the mobile station shall cancel the Forward Supplemental Channel Assignment.

+ The mobile station shall set CH_IND_s = ‘10’.

+ If SCH_INCL_r is equal to ‘1’ and NUM_FOR_SCH is not equal to ‘00000’, for all the NUM_FOR_SCH occurrences, the mobile station shall perform the following:

• 
  If FSCH_VAR_TABLE_ID_s[FOR_SCH_ID_r] is equal to ‘000’, then:
  

– If USE_FLEX_NUM_BITS_s is equal to '1' and FSCH_NBIT_TABLE_ID_s[FOR_SCH_ID_r] is not equal to ‘0000’, then the mobile station shall set the number of CRC bits per frame, FSCH_CRC_LEN_SET_s[FOR_SCH_ID_r][SCCL_INDEX_r], using Table 3.7.5.20-1 and CRC_LEN_IDX_s[FSCH_NBIT_TABLE_ID_s[FOR_SCH_ID_r]][FOR_SCH_NUM_BITS_IDX_r] as the index to the table.

• 
  If FSCH_VAR_TABLE_ID_s[FOR_SCH_ID_r] is not equal to ‘000’, then:
  

+ If FOR_SCH_NUM_BITS_IDX_r is equal to ‘0000’, then N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r] = { FOR_SCH_NUM_BITS_IDX_r },

+ otherwise the mobile station shall set (initialize) N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r] = {FOR_SCH_NUM_BITS_IDX_r} and for i=1, …, FOR_SCH_NUM_BITS_IDX_r the mobile station shall add FOR_SCH_NUM_BITS_IDX_r - VAR_FSCH_RATE_OFFSET_s[FOR_SCH_ID_r][FOR_SCH_NUM_BITS_IDX_r][i] to the set specified by N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r]

– If USE_FLEX_NUM_BITS_s is equal to '0' or if USE_FLEX_NUM_BITS_s is equal to '1' and FSCH_NBIT_TABLE_ID_s[FOR_SCH_ID_r] is equal to ‘0000’, then the mobile station shall set N_FSCH_BITS_SET_s[FOR_SCH_ID_r][SCCL_INDEX_r], the set of number of information bits per frame as follows.

– If USE_FLEX_NUM_BITS_s is equal to '1' and FSCH_NBIT_TABLE_ID_s[FOR_SCH_ID_r] is not equal to ‘0000’, then

+ the mobile station shall set N_FSCH_BITS_SET_s[FOR_SCH_ID_r][SCCL_INDEX_r], the set of number of information bits per frame as follows.
The i^th member of the set N_FSCH_BITS_SET_s[FOR_SCH_ID_r][SCCL_INDEX_r] is equal to NUM_BITS_s[FSCH_NBIT_TABLE_ID_s[FOR_SCH_ID_r]] [N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r][i]], where N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r][i] denotes the i^th member of the set N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r] and,

+ the mobile station shall set FSCH_CRC_LEN_SET_s[FOR_SCH_ID_r][SCCL_INDEX_r], the set of number CRC bits per frame as follows.

+ If SCH_INCL_r is equal to ‘1’ and NUM_REV_SCH is not equal to ‘00000’, for all the NUM_REV_SCH occurrences, the mobile station shall perform the following:

 Set REV_SCH_NUM_BITS_IDX_s[REV_SCH_ID_r] to REV_SCH_NUM_BITS_IDX_r.

 Set REV_WALSH_ID_s [REV_SCH_ID_r][REV_SCH_NUM_BITS_IDX_s] to REV_WALSH_ID_r.

 Set PILOT_PN to PILOT_PN_r.

 If SRCH_OFFSET_INCL_r equals ‘1’, set the SRCH_OFFSET field of PILOT_REC to SRCH_OFFSET_r; otherwise, set the SRCH_OFFSET field of PILOT_REC to ‘000’.

 Set ADD_PILOT_REC_INCL to ADD_PILOT_REC_INCL_r.

 If ADD_PILOT_REC_INCL_r equals ‘1’, the mobile station shall also perform the following:

à Set the PILOT_REC_TYPE field of PILOT_REC to PILOT_REC_TYPE_r.

à If PILOT_REC_TYPE_r is equal to ‘000’, the mobile station shall set the TD_POWER_LEVEL field of PILOT_REC to TD_POWER_LEVEL_r and set the TD_MODE field of PILOT_REC to TD_MODE_r.

à If PILOT_REC_TYPE_r is equal to ‘001’, the mobile station shall:

– Set the AUX_PILOT_QOF field of PILOT_REC to QOF_r.

– Set the AUX_PILOT_WALSH_CODE field of PILOT_REC to AUX_PILOT_WALSH_r with the Walsh Code length specified by WALSH_LENGTH_r.

à If PILOT_REC_TYPE_r is equal to ‘010’, the mobile station shall:

– Set the AUX_PILOT_TD_QOF field of PILOT_REC to QOF_r.

– Set the AUX_PILOT_WALSH_CODE field of PILOT_REC to AUX_WALSH_r with the Walsh Code length specified by WALSH_LENGTH_r.

– Set the AUX_TD_POWER_LEVEL field of PILOT_REC to AUX_TD_POWER_LEVEL_r.

– Set the TD_MODE field of PILOT_REC to TD_MODE_r.

• 
  If PILOT_REC_TYPE_r is equal to ‘011’, the mobile station shall:
  

• 
  Set the SR3_PILOT_POWER1 field of PILOT_REC to SR3_PILOT_POWER1_r.
  
• 
  Set the SR3_PILOT_POWER2 field of PILOT_REC to SR3_PILOT_POWER2_r.
  

• 
  If PILOT_REC_TYPE_r is equal to ‘100’, the mobile station shall:
  

• 
  Set the SR3_PILOT_POWER1 field of PILOT_REC to SR3_PILOT_POWER1_r.
  
• 
  Set the SR3_PILOT_POWER2 field of PILOT_REC to SR3_PILOT_POWER2_r.
  

• 
  Set the AUX_PILOT_WALSH_CODE field of PILOT_REC to AUX_PILOT_WALSH_r with the Walsh Code length specified by WALSH_LENGTH_r.
  
• 
  If ADD_INFO_INCL1_r is equal to ‘1’, set the AUX_PILOT_QOF1 field of PILOT_REC to QOF1_r and set the AUX_PILOT_WALSH_CODE1 field of PILOT_REC to AUX_PILOT_WALSH1_r with the Walsh Code length specified by WALSH_LENGTH1_r; otherwise, set the AUX_PILOT_QOF1 field of PILOT_REC to QOF_r and set the AUX_PILOT_WALSH_CODE1 field of PILOT_REC to AUX_PILOT_WALSH_r with the Walsh Code length specified by WALSH_LENGTH_r.
  
• 
  If ADD_INFO_INCL2_r is equal to ‘1’, set the AUX_PILOT_QOF2 field of PILOT_REC to QOF2_r and set the AUX_PILOT_WALSH_CODE2 field of PILOT_REC to AUX_PILOT_WALSH2_r with the Walsh Code length specified by WALSH_LENGTH2_r; otherwise, set the AUX_PILOT_QOF2 field of PILOT_REC to QOF_r and set the AUX_PILOT_WALSH_CODE2 field of PILOT_REC to AUX_PILOT_WALSH_r with the Walsh Code length specified by WALSH_LENGTH_r.
  

 If SCH_INCL_r is equal to ‘1’ and NUM_SCH is equal to ‘00000’, the mobile station shall delete the corresponding pilot from all entries of the corresponding Supplemental Channel.

 If SCH_INCL_r is equal to ‘1’ and NUM_SCH is not equal to ‘00000’, the mobile station shall:

à If PILOT_INCL is equal to ‘0’, then the mobile station shall delete the corresponding pilot from the Active Set of Supplemental Channel for the corresponding SCCL_INDEX_r.

à If PILOT_INCL is equal to ‘1’, then for each Supplemental Channel included in this record, the mobile station shall set PILOT_PN_s [FOR_SCH_ID_r][SCCL_INDEX_s][i] to PILOT_PN_r, QOF_ID_s[FOR_SCH_ID_r][SCCL_INDEX_s][i] to QOF_MASK_ID_SCH_r, and FOR_SCH_CC_INDEX_s [FOR_SCH_ID_s][SCCL_INDEX_s][i] to CODE_CHAN_SCH_r.

• 
  If PILOT_INCL is equal to ‘1’ and CCSH_INCLUDED is set to ‘1’, then for each Supplemental Channel included in this record, the mobile station shall set CCSH_ENCODER_TYPE_s[FOR_SCH_ID_r][SCCL_INDEX_r][i] to CCSH_ENCODER_TYPE_r.
  
• 
  If PILOT_INCL is equal to ‘1’ and CCSH_INCLUDED is set to ‘0’, then for each Supplemental Channel included in this record, the mobile station shall set CCSH_ENCODER_TYPE_s[FOR_SCH_ID_r][SCCL_INDEX_r][i] to ‘0’ (default Turbo Encoder type).
  

+ If CCSH_INCLUDED is equal to ‘1’, the mobile station shall perform the following:

 If CCSH_ENCODER_ACTION_TIME_r is not received, the mobile station shall apply each CCSH_ENCODER_TYPE_s at the action time of the message.

+ If 3X_DCCH_INFO_INCL_r equals ‘1’, for each included member of the Active Set, the mobile station store the following:

• 
  If 3X_DCCH_LOW_INCL_r equals ‘1’, set the QOF_MASK_ID_DCCH_LOW field to QOF_MASK_ID_DCCH_LOW_r and the CODE_CHAN_DCCH_LOW field to CODE_CHAN_DCCH_LOW_r. Otherwise, set the QOF_MASK_ID_DCCH_LOW field to QOF_MASK_ID_FCH_r and the CODE_CHAN_DCCH_LOW to CODE_CHAN_FCH_r.
  
• 
  If 3X_DCCH_HIGH_INCL_r equals ‘1’, set the QOF_MASK_ID_DCCH_HIGH field to QOF_MASK_ID_DCCH_HIGH_r and the CODE_CHAN_DCCH_HIGH field to CODE_CHAN_DCCH_HIGH_r. Otherwise, set the QOF_MASK_ID_DCCH_HIGH field to QOF_MASK_ID_FCH_r and the CODE_CHAN_DCCH_HIGH to CODE_CHAN_FCH_r.
  
• 
  If 3X_SCH_INFO_INCL_r equals ‘1’, for each Supplemental Channel included, the mobile station store the following:
  

• 
  If 3X_SCH_LOW_INCL_r equals ‘1’, set QOF_ID_SCH_LOW[FOR_SCH_ID_r][SCCL_INDEX_r][i] to QOF_MASK_ID_SCH_LOW_r and FOR_SCH_CC_INDEX_LOW[FOR_SCH_ID_r][SCCL_INDEX_r][i] field to CODE_CHAN_SCH_LOW_r. Otherwise, set QOF_ID_SCH_LOW[FOR_SCH_ID_r][SCCL_INDEX_r][i] to QOF_MASK_ID_SCH_r, and FOR_SCH_CC_INDEX_LOW[FOR_SCH_ID_r][SCCL_INDEX_r][i] to CODE_CHAN_SCH_r.
  
• 
  If 3X_SCH_HIGH_INCL_r equals ‘1’, set QOF_ID_SCH_HIGH[FOR_SCH_ID_r][SCCL_INDEX_r][i] to QOF_MASK_ID_SCH_HIGH_r and the FOR_SCH_CC_INDEX_HIGH[FOR_SCH_ID_r][SCCL_INDEX_r][i] field to CODE_CHAN_SCH_HIGH_r. Otherwise, set QOF_ID_SCH_HIGH[FOR_SCH_ID_r][SCCL_INDEX_r][i] to QOF_MASK_ID_SCH_r, and FOR_SCH_CC_INDEX_HIGH[FOR_SCH_ID_r][SCCL_INDEX_r][i] to CODE_CHAN_SCH_r.
  

+ If FUNDICATED_BCMC_IND_r equals ‘1’, for each included member of the Active Set, the mobile station shall store the following:

• 
  Set FOR_CPCCH_WALSH_s to FOR_CPCCH_WALSH_r.
  
• 
  Set FOR_CPCSCH_s to FOR_CPCSCH_r.
  

+ The mobile station shall delete all pilots that are not listed in the Active Set from the Active Set of the Supplemental Channel for the Forward Supplemental Channel Assignment (if any). If these deleted pilots include all pilots in the Active Set of the Supplemental Channel, the mobile station shall cancel the Forward Supplemental Channel Assignment.

+ The mobile station shall set CH_IND_s = ‘11’.

+ If SCH_INCL_r is equal to ‘1’ and NUM_FOR_SCH is not equal to ‘00000’, for all the NUM_FOR_SCH occurrences, the mobile station shall perform the following:

• 
  If FSCH_VAR_TABLE_ID_s[FOR_SCH_ID_r] is equal to ‘000’, then:
  

– If USE_FLEX_NUM_BITS_s is equal to '1' and FSCH_NBIT_TABLE_ID_s[FOR_SCH_ID_r] is not equal to ‘0000’, then the mobile station shall set the number of CRC bits per frame, FSCH_CRC_LEN_SET_s[FOR_SCH_ID_r][SCCL_INDEX_r], using Table 3.7.5.20-1 and CRC_LEN_IDX_s[FSCH_NBIT_TABLE_ID_s[FOR_SCH_ID_r]][FOR_SCH_NUM_BITS_IDX_r] as the index to the table.

• 
  If If FSCH_VAR_TABLE_ID_s[FOR_SCH_ID_r] is not equal to ‘000’, then:
  

+ If FOR_SCH_NUM_BITS_IDX_r is equal to ‘0000’, then N_FSCH_BITS_IDX_SET_s[FOR_SCH_ID_r] =