A. Education

A. Publications

“Axial Vane Rotary Device and Sealing System Therefore,” United States Patent Number 5,429,084, July 4, 1995.

“Rotary Device with Slidable Vane Supports,” United States Patent Number 5,509,793, Apr. 23, 1996.

“Axial Vane Rotary Device and Sealing System Therefore,” United States Patent Number 5,551,853, Sept. 3, 1996.

“Hockey Puck With Centrally Disposed Spherical Element,” United States Patent Number 5,976,042, Nov. 2, 1999.

“Assembly of Interconnected Containers and Containers for Use Therein,” United States Patent Number 6,237,772, May 29, 2001.

“Aerial Sensor Pod Deployment System,” United States Patent Number 7,387,276, June 17, 2008.

“Aerial Sensor Pod Deployment System,” United States Patent Number 7,726,604, June 1, 2010.

“Aerial Sensor Pod Deployment System,” United States Patent Number 7,726,605, June 1, 2010.

“Aerial Sensor Pod Deployment System,” United States Patent Number 7,806,368, Oct. 5, 2010.

2. Refereed Journal Articles and Bound Transactions

“Design and Testing Inflatable Plugs for Flood Containment in Tunnels,” Eduardo M. Sosa, Ever J. Barbero, and Gregory J. Thompson, Revista Internacional de Desastres Naturales, Accidentes e Infraestructura Civil, Vol. 14 (1), 1-19, 2014. (In Spanish)

“Friction Characteristics of Confined Inflatable Structures,” Eduardo M. Sosa, Gregory J. Thompson, Ever J. Barbero, Subhadeep Ghosh, and Kevin L. Peil, Friction, Vol. 2 (4), 365–390, 2014.

“Testing of Full-Scale Inflatable Plug for Flood Mitigation in Tunnels,” Eduardo M. Sosa, Gregory J. Thompson, and Ever J. Barbero, Transportation Research Record: Journal of the Transportation Research Board, No. 2407, 59–67, 2014.

“Heavy Duty Truck Fuel Consumption Prediction Based on Driving Cycle Properties,” Oscar F. Delgado, Nigel N. Clark, and Gregory J. Thompson, International Journal of Sustainable Transportation, Vol. 6 (6), 338-361, 2012.

“An Investigation of NO₂ Emissions from a Heavy-Duty Diesel Engine Fumigated with H₂ and Natural Gas,” Shiyu Liu, Hailin Li, Timothy Gatts, Chetmun Liew, Scott Wayne, Gregory Thompson, Nigel Clark and John Nuszkowski, Combustion Science and Technology, Vol. 184, 2008-2035, 2012.

“The Effect of Cetane Improvers and Biodiesel on Diesel Particulate Matter Size,” John Nuszkowski, Kevin Flaim, and Gregory Thompson, Journal of Fuels and Lubricants, Vol. 4 (1), 23-33, 2011.

“Modeling Transit Bus Fuel Consumption Based on Cycle Properties,” Oscar F. Delgado, Nigel N. Clark, and Gregory J. Thompson, Journal of Air and Waste Management Association, Vol. 61, 443-452, 2011.

“Expressing Cycles and Their Emissions on the Basis of Properties and Results from Other Cycles,” Nigel N. Clark, Kuntal A. Vora, Lijuan Wang, Mridul Gautam, W. Scott Wayne and Gregory J. Thompson, Environmental Science & Technology, Vol. 44 (15), 5986–5992, 2010.

“Neat Fuel Influence on Biodiesel Blend Emissions,” Gregory J. Thompson and John Nuszkowski, International Journal of Engine Research, Vol. 11, 61-77, 2010.

“The Influence of Accelerator Pedal Position Control during Transient Laboratory Testing on Heavy Duty Diesel Engines,” John Nuszkowski, Gregory J. Thompson, and Michael Ursic, Journal of Engines, Vol. 118, 398-404, 2009.

“Evaluation of the NOx Emissions from Heavy-duty Diesel Engines with the Addition of Cetane Improvers,” J. Nuszkowski, R. R. Tincher, and G. J. Thompson, Journal of Automobile Engineering, Vol. 223, 1049-1060, 2009.

“Development of a Heavy Heavy-Duty Diesel Engine Schedule for Representative Measurement of Emissions,” Feng Zhen, Nigel N. Clark, Clinton R. Bedick, Mridul Gautam, W. Scott Wayne, Gregory J. Thompson, and Donald W. Lyons, Journal of Air and Waste Management Association, Vol. 59, 950-959, 2009.

“Idle Emissions from Medium Heavy-Duty Diesel and Gasoline Trucks,” ABM S. Khan, Nigel N. Clark, Mridul Gautam, W. Scott Wayne, Gregory J. Thompson, and Donald W. Lyons, Journal of Air and Waste Management Association, Vol. 59, 354–359, 2009.

“A Work-Based Window Method for Calculating In-Use Brake-Specific NOx Emissions of Heavy-Duty Diesel Engines,” Benjamin C. Shade, Daniel K. Carder, Gregory J. Thompson, and Mridul Gautam, Journal of Engines, Vol. 117, 778-793, 2008.

“On-Road NOx Emission Rates From 1997-2003 Heavy-Duty Diesel Trucks,” Thomas L. Darlington, Dennis Kahlbaum, and Gregory Thompson, Journal of Commercial Vehicles, Vol. 117, 185-199, 2008.

“Summary of In-use NOx Emissions from Heavy-Duty Diesel Engines,” Gregory J. Thompson, Daniel K. Carder, Nigel N. Clark, and Mridul Gautam, Journal of Commercial Vehicles, Vol. 117, 162-184, 2008.

“Regulated and Non-Regulated Emissions and Fuel Economy from Conventional Diesel, Hybrid-Electric Diesel, and Natural Gas Transit Buses,” W. Scott Wayne, Nigel N. Clark, ABM S. Khan, Mridul Gautam, Gregory Thompson, and Donald W. Lyons, Journal of the Transportation Research Forum, Vol. 47, 105-125, 2008.

“Evaluation of Emissions from New and In-Use Transit Buses in Mexico City, Mexico,” Nigel N. Clark, Enrique Rivero Borrell, David L. McKain, Victor Hugo Paramo, W. Scott Wayne, Walter Vergara, Ryan A. Barnett, Mridul Gautam, Gregory Thompson, Donald W. Lyons, and Lee Schipper, Transportation Research Record, Vol. 1987, 42-53, 2007.

“Cost of Lower NOx Emissions: Increased CO₂ Emissions from Heavy-Duty Diesel Engines,” Mohan Krishnamurthy, Daniel K. Carder, Gregory J. Thompson, and Mridul Gautam, Journal of Atmospheric Environment, Vol. 41 (3), 666-675, 2007.

“Idle Emissions from Heavy-Duty Diesel Vehicles: Review and Recent Data,” ABM S. Khan, Nigel N. Clark, Gregory J. Thompson, W. Scott Wayne, Mridul Gautam, Donald W. Lyons, and Daniel Hawelti, Journal of Air and Waste Management Association, Vol. 56, 1404-1419, 2006.

“Evaluation of Methods for the Determination of Diesel-generated Fine Particulate Matter: Physical Characterization Results,” John S. Kinsey, William A. Mitchell, William C. Squier, Kara Linna, Foy G. King, Russell Logan, Yuanji Dong, Gregory J. Thompson, and Nigel N. Clark, Journal of Aerosol Science, Vol. 37, 63-87, 2006.

“Impact of Vehicle Weight on Truck Behavior and Emissions, Using On-Board Measurement,” Corey M. Strimer, Nigel N. Clark, Daniel Carder, Mridul Gautam, and Gregory Thompson, Journal of Engines, Vol. 114, 1630-1641, 2006.

“Creation and Evaluation of a Medium Heavy-duty Truck Test Cycle,” Nigel N. Clark, Mridul Gautam, W. Scott Wayne, Ralph D. Nine, Gregory J. Thompson, Donald W. Lyons, Hector Maldonado, Mark Carlock, and Archana Agrawal, Journal of Fuels and Lubricants, Vol. 112, 2654-2667, 2003.

“Emissions from Diesel-fueled Heavy-duty Vehicles in Southern California,” Nigel N. Clark, W. Scott Wayne, Ralph D. Nine, Thomas Buffamonte, Timothy Hall, Byron L. Rapp, Gregory Thompson, and Donald W. Lyons, Journal of Fuels and Lubricants, Vol. 112, 1688-1699, 2003.

“Speciation of Organic Compounds from the Exhaust of Heavy-Duty Trucks and Buses: Effect of Catalytic Devices on the Emissions Profiles of Diesel and CNG Fueled Vehicles,” Miriam Lev-On, Chuck LeTavec, Ken Kimura, Jim Uihlien, Teresa Alleman, Doug Lawson, Keith Vertin, Gregory Thompson, Nigel Clark, Mridul Gautam, Scott Wayne, Barbara Zielinska, John Sagebiel, Sougato Chatterjee, and Kevin Hallstrom, Journal of Fuels and Lubricants, Vol. 111, 1948-1973, 2002.

“Measurement of Brake-specific NOx Emissions Using Zirconia Sensors for In-use, On-board Heavy-duty Vehicle Applications,” Mridul Gautam, Wesley C. Riddle, Gregory J. Thompson, Daniel K. Carder, Nigel N. Clark, and Donald W. Lyons, Journal of Fuels and Lubricants, Vol. 111, 825-841, 2002.

“Inference of Torque and Power from Heavy-Duty Diesel Engines for On-road Emissions Monitoring,” Gregory J. Thompson, Nigel N. Clark, Mridul Gautam, Daniel K. Carder, and Donald W. Lyons, Journal of Fuels and Lubricants, Vol. 111, 279-285, 2002.

“Year-long Evaluation of Trucks and Buses Equipped with Passive Diesel Particle Filters,” Chuck LeTavec, Jim Uihlein, Keith Vertin, Sougato Chatterjee, Scott Wayne, Nigel Clark, Mridul Gautam, Greg Thompson, Don Lyons, Kevin Chandler, and Tim Coburn, Journal of Fuels and Lubricants, Vol. 111, 242-266, 2002.

“Chemical Speciation of Exhaust Emissions from Trucks and Buses Fueled on Ultra-Low Sulfur Diesel and CNG,” Miriam Lev-On, Chuck LeTavec, Jim Uihlein, Teresa L. Alleman, Douglas R. Lawson, Keith Vertin, Gregory J. Thompson, Mridul Gautam, Scott Wayne, Barbara Zielinska, John Sagebiel, Sougato Chatterjee, and Kevin Hallstrom, Journal of Fuels and Lubricants, Vol. 111, 220-241, 2002.

“Measurement of In-Use, On-Board Emissions from Heavy-Duty Diesel Vehicles: Mobile Emissions Measurement System,” Mridul Gautam, Gregory J. Thompson, Daniel K. Carder, Nigel N. Clark, Benjamin C. Shade, Wesley C. Riddle, and Donald W. Lyons, Journal of Fuels and Lubricants, Vol. 110, 2001.

“The Coaxial Cavity Resonator as a Prototype RF IC Engine Ignition Source,” Dustin L. Mcintyre, Gregory J. Thompson, and James E. Smith, Journal of Engines, Vol. 110, 2001.

“Neural Network Modelling of the Emissions and Performance of a Heavy-Duty Diesel Engine,” G. J. Thompson, C. M. Atkinson, N. N. Clark, T. W. Long, and E. Hanzevack, Proc Instn Mech Engrs, Vol. 214, Part D, No. D04499, 2000.

“In-Cylinder Pressure Characteristics of Fischer-Tropsch and Conventional Diesel Fuels in a Heavy Duty CI Engine,” C. M. Atkinson, G. J. Thompson, M. L. Traver and N. N. Clark, Journal of Fuels and Lubricants, Vol. 108, 1999.

“Transient Emission Comparison of Alternative Compression Ignition Fuels,” N. N. Clark, C. M. Atkinson, G. J. Thompson, and R. D. Nine, Journal of Fuels and Lubricants, Vol. 108, 1999.

“Simulation of a Continuously Variable Power Split Transmission,” Z. Lu, G. J. Thompson, V. H. Mucino, and J. E. Smith, Journal of Passenger Cars, Vol. 108, 1999.

“Structural Design of a Probe System for a High Temperature, Pressurized Fluidized Bed Combustor,” G. J. Thompson, N. N. Clark, and J. E. Smith, Proc Instn Mech Engrs, Vol. 213, Part A, No. A0399, 1999.

“Rotor Shaft Bearing Analysis for Selected Rand Cam Engine Configurations,” Raymond Orndorff, Greg Thompson, James E. Smith and Victor H. Mucino, Journal of Engines, Vol. 104, 1995.

3. Proceedings and Refereed Conference Articles

“Testing of Full-Scale Confined Inflatables for the Protection of Tunnels,” Ever J. Barbero, Eduardo M. Sosa, and Gregory J. Thompson, VI International Conference on Textile Composites and Inflatable Structures, Munich, Germany, Oct. 9-11, 2013.

“Discharge Coefficients for Irregular Orifices” Wade Huebsch, Donald Gray, Gregory Thompson, and Perry Spaur, Bulletin of the American Physical Society, 66th Annual Meeting of the APS Division of Fluid Dynamics, Vol. 58, No. 18, Pittsburgh, PA., Nov. 24–26, 2013.

“Inflatable Plug for Threat Mitigation in Transportation Tunnels,” Xavier Martinez, Julio Davalos, Ever Barbero, Eduardo Sosa, Wade Huebsch, Ken Means, Larry Banta, and Greg Thompson, SAMPE 2012 Conference and Exhibition, Baltimore, MD, May 2012.

“Shaping the Mechanical Engineer of Tomorrow Through a Hands-on Design Spine Curriculum to Meet National and Global Needs,” Gregory J. Thompson, Poster, Frontiers of Engineering Education, Irvine, CA, Oct. 2012.

“Method for Translation of In-use Fuel Consumption and NOx Emissions between Different Heavy-Duty Vehicle Routes,” Oscar F. Delgado, Nigel N. Clark, and Gregory J. Thompson, American Society of Mechanical Engineers Technical Paper No. ICEF2011-60108, ASME Internal Combustion Engine Fall Technical Conference, Morgantown, WV, Oct. 2011.

“Effects of Oil Aging on Laboratory Measurement of Emissions from a Legacy Heavy-duty Diesel Engine,” Mrinmoy Dam, John Nuszkowski, and Gregory J. Thompson, Society of Automotive Engineers Technical Paper No. 2011-01-1163, International Congress and Exposition, Detroit, MI, Apr. 2011.

“The Effect of Cetane Improvers and Biodiesel on Diesel Particulate Matter Size,” John Nuszkowski, Kevin Flaim, and Gregory Thompson, Society of Automotive Engineers Technical Paper No. 2011-01-0330, International Congress and Exposition, Detroit, MI, Apr. 2011.

“Biodiesel Blend Emissions of a 2007 Medium Heavy-Duty Diesel Truck,” Idowu Olatunji, Nigel Clark, Petr Sindler, David L. McKain, Gregory Thompson, Mridul Gautam, W. Wayne, and John Nuszkowski, Society of Automotive Engineers Technical Paper No. 2010-01-1968, Commercial Vehicle Engineering Congress, Rosemont, IL, Oct. 2010.

“Comparative Emissions From Diesel- and Biodiesel-Fueled Buses From 2002 to 2008 Model Years,” Nigel Clark, David L. McKain, Petr Sindler, Ronald Jarrett, John Nuszkowski, Mridul Gautam, W. Wayne, Gregory Thompson, and Ricky Sonny, Society of Automotive Engineers Technical Paper No. 2010-01-1967, Commercial Vehicle Engineering Congress, Rosemont, IL, Oct. 2010.

“Application and Repeatability of Transient Heat Release Analysis for Heavy Duty Diesel Engines,” John Nuszkowski and Gregory J. Thompson, Society of Automotive Engineers Technical Paper No. 2009-01-1125, International Congress and Exposition, Detroit, MI, Apr. 2009.

“The Influence of Accelerator Pedal Position Control during Transient Laboratory Testing on Heavy Duty Diesel Engines,” John Nuszkowski, Gregory J. Thompson, and Michael Ursic, Society of Automotive Engineers Technical Paper No. 2009-01-0619, International Congress and Exposition, Detroit, MI, Apr. 2009.

“Emissions from a Legacy Diesel Engine Exercised Through the ACES Engine Test Schedule,” Nigel N. Clark, Clinton R. Bedick, Lijuan Wang, Gregory Thompson, David McKain, and Bradley Ralston, Society of Automotive Engineers Technical Paper No. 2008-01-1679, SAE International Powertrains, Fuels and Lubricants Congress, Shanghai, China, June 2008.

“Heat Release and Emission Characteristics of B20 Biodiesel Fuels During Steady State and Transient Operation,” John Nuszkowski, Gregory J. Thompson, Ray Tincher, and Nigel N. Clark, Society of Automotive Engineers Technical Paper No. 2008-01-1377, International Congress and Exposition, Detroit, MI, Apr. 2008.

“A Work-Based Window Method for Calculating In-Use Brake-Specific NOx Emissions of Heavy-Duty Diesel Engines,” Benjamin C. Shade, Daniel K. Carder, Gregory J. Thompson, and Mridul Gautam, Society of Automotive Engineers Technical Paper No. 2008-01-1301, International Congress and Exposition, Detroit, MI, Apr. 2008.

“On-Road NOx Emission Rates From 1997-2003 Heavy-Duty Diesel Trucks,” Thomas L. Darlington, Dennis Kahlbaum, and Gregory Thompson, Society of Automotive Engineers Technical Paper No. 2008-01-1299, International Congress and Exposition, Detroit, MI, Apr. 2008.

“Summary of In-use NOx Emissions from Heavy-Duty Diesel Engines,” Gregory J. Thompson, Daniel K. Carder, Nigel N. Clark, and Mridul Gautam, Society of Automotive Engineers Technical Paper No. 2008-01-1298, International Congress and Exposition, Detroit, MI, Apr. 2008.

“In-Use Heavy-duty Diesel Emissions Measurements Using an Air-to-Fuel Ratio Derived Exhaust Flow Rate,” John Nuszkowski, Jason D. Bolyard, Gregory J. Thompson, and Daniel K. Carder, American Society of Mechanical Engineers Technical Paper No. ICEF2007-1790, ASME Internal Combustion Engine Fall Technical Conference, Charleston, SC, Oct. 2007.

“Regulated Emissions from Diesel and Compressed Natural Gas Transit Buses,” Nigel N. Clark, W. Scott Wayne, Donald W. Lyons, Mridul Gautam, Gregory J. Thompson, and ABM S. Khan, Poster, DEER Conference, Detroit, MI, Aug. 2007.

“Weight Effect on Emissions and Fuel Consumption from Diesel and Lean-burn Natural Gas Transit Buses,” ABM S. Khan, Nigel N. Clark, W. Scott Wayne, Mridul Gautam, Gregory J. Thompson, David L. McKain, Donald W. Lyons, and Ryan A. Barnett, Society of Automotive Engineers Technical Paper No. 2007-01-3626, Asia Pacific Automotive Engineering Conference, Hollywood, CA, Aug. 2007.

“Experimental and Error Analysis Investigation into Dilution Factor Equations,” John Nuszkowski, Gregory J. Thompson, and Nigel Clark, Society of Automotive Engineers Technical Paper No. 2007-01-0310, International Congress and Exposition, Detroit, MI, Apr. 2007.

“Parametric Study of 2007 Standard Heavy-Duty Diesel Engine Particulate Matter Sampling System,” Nigel N. Clark, Daniel Carder, Gregory J. Thompson, Mridul Gautam, Donald W. Lyons, Society of Automotive Engineers Technical Paper No. 2007-01-0060, Fuels and Emissions Conference, Cape Town, South Africa, Jan. 2007.

“Effects of Average Driving Cycle Speed on Lean-Burn Natural Gas Bus Emissions and Fuel Economy,” Nigel N. Clark, W. Scott Wayne, ABM S. Khan, Donald W. Lyons, Mridul Gautam, David L. McKain, Gregory J. Thompson, and Ryan A. Barnett, Society of Automotive Engineers Technical Paper No. 2007-01-0054, Fuels and Emissions Conference, Cape Town, South Africa, Jan. 2007.

“System Model for Selective NOx Recirculation (SNR) to be Used in Stationary Lean-Burn Natural Gas Engines,” Andrew Zimmerman, Chamila Tissera, Emre Tatli, Nigel Clark, Richard Atkinson, Gregory Thompson, and Richard Turton, American Society of Mechanical Engineers Technical Paper No. ICEF2006-1542, ASME Internal Combustion Engine Fall Technical Conference, Sacramento, CA, Nov. 2006.

“Regulated Emissions From Heavy Heavy-Duty Diesel Trucks Operating in the South Coast Air Basin,” Nigel N. Clark, Mridul Gautam, W. Scott Wayne, Gregory J. Thompson, Ralph D. Nine, Donald W. Lyons, Thomas Buffamonte, Shuhong Xu, and Hector Maldonado, Society of Automotive Engineers Technical Paper No. 2006-01-3395, Powertrain and Fluid Systems Conference, Toronto, Ontario, Oct. 2006.

“Influences of Real-World Conditions on In-Use Emission From Heavy-Duty Diesel Engines,” Gregory J. Thompson, John C. Gibble, Nigel N. Clark, and Mridul Gautam, Society of Automotive Engineers Technical Paper No. 2006-01-3393, Powertrain and Fluid Systems Conference, Toronto, Ontario, Oct. 2006.

“Development of a Vehicle Road Load Model for ECU Broadcast Power Verification in On-Road Emissions Testing,” Nathan A. Moynahan, Gregory J. Thompson, Nigel N. Clark, and Mridul Gautam, Society of Automotive Engineers Technical Paper No. 2006-01-3392, Powertrain and Fluid Systems Conference, Toronto, Ontario, Oct. 2006.

“Pressure Drop and Cleaning of In-Use, Ash-Loaded Diesel Particulate Filters,” John Nuszkowski, Gregory J. Thompson, Nathaniel Moles, Marty Chiaramonte, and Jun Hu, Society of Automotive Engineers Technical Paper No. 2006-01-3256, Powertrain and Fluid Systems Conference, Toronto, Ontario, Oct. 2006.

“Impact of Vehicle Weight on Truck Behavior and Emissions, Using On-Board Measurement,” Corey M. Strimer, Nigel N. Clark, Daniel Carder, Mridul Gautam, and Gregory Thompson, Society of Automotive Engineers Technical Paper No. 2005-01-3788, Powertrain and Fluid Systems Conference, San Antonio, TX, Oct. 2005.

“NOx Decomposition in Natural Gas, Diesel and Gasoline Engines for Selective NOx Recirculation,” Chamila A. Tissera, Matt M. Swartz, Emre Tatli, Ramprabhu Vellaisamy, Nigel N. Clark, Gregory J. Thompson, and Richard J. Atkinson, Society of Automotive Engineers Technical Paper No. 2005-01-2144, Fuels and Lubricants Meeting, Rio de Janeiro, Brazil, May 2005.

“Assessment of NOx Destruction in Diesel Engines by Injecting NO in the Intake Manifold,” Ramprabhu Vellaisamy, Nigel N. Clark, Gregory J. Thompson, Richard J. Atkinson, Chamila A. Tissera, and Matt M. Swartz, Society of Automotive Engineers Technical Paper No. 2005-01-0370, International Congress and Exposition, Detroit, MI, Apr. 2005.

“Nitric Oxide Conversion in a Spark-Ignited Natural Gas Engine,” Matt M. Swartz, Chamila A. Tissera, Ramprabhu Vellaisamy, Nigel N. Clark, Gregory J. Thompson, and Richard J. Atkinson, Society of Automotive Engineers Technical Paper No. 2005-01-0234, International Congress and Exposition, Detroit, MI, Apr. 2005.

“Dynamic Modal Analysis and Optimization of a Mechanical Sensor Arm Deployment System for a C-130 Aircraft,” Zenovy S. Wowczuk, Kenneth H. Means, Victor H. Mucino, Gregory J. Thompson, Lawrence Feragotti, James E. Smith, Adam Naternicola, and Bruce J. Corso, Society of Automotive Engineers Technical Paper No. 2004-01-3129, World Aviation Congress and Exposition, Reno, NV, Nov. 2004.

“Design of a Standardized C-130 Reconnaissance Sensor Platform,” Zenovy S. Wowczuk, Kenneth H. Means, Victor H. Mucino, Gregory J. Thompson, James Smith II, Jeffery R. X. Auld, James E. Smith, Adam Naternicola, Lawrence Anthony Feragotti, and Bruce J. Corso, Society of Automotive Engineers Technical Paper No. 2004-01-3092, World Aviation Congress and Exposition, Reno, NV, Nov. 2004.

“Development of an Interface Method for Implementing Road Grade in Chassis Dynamometer Testing,” Gregory J. Thompson, Nigel N. Clark, Richard J. Atkinson, Zac Luzader, Frances L. VanScoy, Vic Baker, and Jesse Chandler, American Society of Mechanical Engineers Technical Paper No. ICEF2004-896, ASME Internal Combustion Engine Fall Technical Conference, Long Beach, CA, Oct. 2004.

“Reduction of Emissions from a High Speed Passenger Ferry,” Gregory J. Thompson, Nigel N. Clark, Mridul Gautam, Daniel K. Carder, and Sam George, American Society of Mechanical Engineers Technical Paper No. ICEF2004-895, ASME Internal Combustion Engine Fall Technical Conference, Long Beach, CA, Oct. 2004.

“Size Distribution of Diesel Particulate Matter From a Heavy Duty Diesel Engine During the FTP Transient Cycle,” Emre Tatli, Nigel N. Clark, Richard J. Atkinson, and Gregory J. Thompson, American Society of Mechanical Engineers Technical Paper No. ICEF2004-862, ASME Internal Combustion Engine Fall Technical Conference, Long Beach, CA, Oct. 2004.

“Selective NOx Recirculation for Stationary Lean-Burn Natural Gas Engines,” Chamila A. Tissera, Matt M. Swartz, Emre Tatli, Ramprabhu Vellaisamy, Nigel N. Clark, Gregory J. Thompson, Ralph D. Nine, and Richard J. Atkinson, American Society of Mechanical Engineers Technical Paper No. ICEF2004-839, ASME Internal Combustion Engine Fall Technical Conference, Long Beach, CA, Oct. 2004.

“Correlation Study of PM and NOx for Heavy-Duty Vehicles Across Multiple Drive Schedules,” Kuntal A. Vora, Nigel N. Clark, Ralph D. Nine, Mridul Gautam, W. Scott Wayne, Gregory J. Thompson, and Donald W. Lyons, Society of Automotive Engineers Technical Paper No. 2004-01-3022, SAE Powertrain & Fluid Systems Conference & Exhibition, Tampa, FL, Oct. 2004.

“Creation and Evaluation of a Medium Heavy-duty Truck Test Cycle,” Nigel N. Clark, Mridul Gautam, W. Scott Wayne, Ralph D. Nine, Gregory J. Thompson, Donald W. Lyons, Hector Maldonado, Mark Carlock, and Archana Agrawal, Society of Automotive Engineers Technical Paper No. 2003-01-3284, SAE Powertrain & Fluid Systems Conference & Exhibition, Pittsburgh, PA, Oct. 2003.

“Rotary Engines: A Concept Review,” Gregory J. Thompson, James E. Smith, and Zenovy S. Wowczuk, Society of Automotive Engineers Technical Paper No. 2003-01-3206, SAE Powertrain & Fluid Systems Conference & Exhibition, Pittsburgh, PA, Oct. 2003.

“Downwash Wake Reduction Investigation for Application on the V-22 Osprey,” Gerald M. Angle, Chad A. Riba, Wade W. Huebsch, Gregory J. Thompson, and James E. Smith, Society of Automotive Engineers Technical Paper No. 2003-01-3020, World Aviation Congress and Exposition, Montreal, Quebec, Sept. 2003.

“Reduction of Emissions from a High-Speed Ferry,” Gregory J. Thompson, Mridul Gautam, Nigel N. Clark, and Donald W. Lyons, 2003 Diesel Engine Emissions Reduction Conference, Newport, RI, Aug. 2003.

“Advocating the Development of Universal Onboard Marine Emission Measurement Protocols,” Robert Behr, Daniel Gore, Jonathan DeHart, Gregory Thompson, Mridul Gautam, Nigel Clark, William Remley, and James Corbett, Proceedings of the Marine Environmental Engineering Technology Symposium 2003, Arlington, VA, Aug. 2003.

“Emissions from Diesel-fueled Heavy-duty Vehicles in Southern California,” Nigel N. Clark, W. Scott Wayne, Ralph D. Nine, Thomas Buffamonte, Timothy Hall, Byron L. Rapp, Gregory Thompson, and Donald W. Lyons, Society of Automotive Engineers Technical Paper No. 2003-01-1901, 2003 JSAE/SAE International Spring Fuels and Lubricants Meeting, Yokohama, Japan, May 2003.

“Numerical Modeling of School Bus Crash Scenarios,” Gregory J. Thompson, Zenovy Wowczuk, James E. Smith, Wade W, Huebsch, and Victor Mucino, Proceedings of the 22^nd IASTED International Conference, Paper No. 377-075, Innsbruck, Austria, Feb. 2003.

“Speciation of Organic Compounds From the Exhaust of Trucks and Buses: Effect of Fuel and After-Treatment on Vehicle Emission Profiles,” Miriam Lev-On, Chuck LeTavec, Ken Kimura, Jim Uihlien, Teresa Alleman, Doug Lawson, Keith Vertin, Gregory Thompson, Nigel Clark, Mridul Gautam, Scott Wayne, Barbara Zielinska, John Sagebiel, Sougato Chatterjee, and Kevin Hallstrom, Society of Automotive Engineers Technical Paper No. 2002-01-2873, Powertrain & Fluid Systems Conference & Exhibition, San Diego, CA, Oct. 2002.

“Measurement of Brake-specific NOX Emissions Using Zirconia Sensors for In-use, On-board Heavy-duty Vehicle Applications,” Mridul Gautam, Wesley C. Riddle, Gregory J. Thompson, Daniel K. Carder, Nigel N. Clark, and Donald W. Lyons, Society of Automotive Engineers Technical Paper No. 2002-01-1755, International Spring Fuels and Lubricants Meeting and Exhibition, Reno, NV, May 2002.

“Determination of In-use, Brake-specific Emissions from Off-road Equipment Powered by Mechanically Controlled Diesel Engines,” Daniel K. Carder, Mridul Gautam, Gregory J. Thompson, and Ryan A. Barnett, Society of Automotive Engineers Technical Paper No. 2002-01-1756, International Spring Fuels and Lubricants Meeting and Exhibition, Reno, NV, May 2002.

“Inference of Torque and Power from Heavy-Duty Diesel Engines for On-road Emissions Monitoring,” Gregory J. Thompson, Nigel N. Clark, Mridul Gautam, Daniel K. Carder, and Donald W. Lyons, Society of Automotive Engineers Technical Paper No. 2002-01-0614, International Congress and Exposition, Detroit, MI, Mar. 2002.

“Year-long Evaluation of Trucks and Buses Equipped with Passive Diesel Particle Filters,” Chuck LeTavec, Jim Uihlein, Keith Vertin, Sougato Chatterjee, Scott Wayne, Nigel Clark, Mridul Gautam, Greg Thompson, Don Lyons, Kevin Chandler, and Tim Coburn, Society of Automotive Engineers Technical Paper No. 2002-01-0433, International Congress and Exposition, Detroit, MI, Mar. 2002.

“Chemical Speciation of Exhaust Emissions from Trucks and Buses Fueled on Ultra-Low Sulfur Diesel and CNG,” Miriam Lev-On, Chuck LeTavec, Jim Uihlein, Teresa L. Alleman, Douglas R. Lawson, Keith Vertin, Gregory J. Thompson, Mridul Gautam, Scott Wayne, Barbara Zielinska, John Sagebiel, Sougato Chatterjee, and Kevin Hallstrom, Society of Automotive Engineers Technical Paper No. 2002-01-0432, International Congress and Exposition, Detroit, MI, Mar. 2002.

“Measurement of In-Use, On-Board Emissions from Heavy-Duty Diesel Vehicles: Mobile Emissions Measurement System,” Mridul Gautam, Gregory J. Thompson, Daniel K. Carder, Nigel N. Clark, Benjamin C. Shade, Wesley C. Riddle, and Donald W. Lyons, Society of Automotive Engineers Technical Paper No. 2001-01-3643, Fall Fuels & Lubricants Meeting, San Antonio, TX, 2001.

“Measurement of In-Use Brake-Specific Emissions from Heavy-Duty Diesel Vehicles using the On-Board Mobile Emissions Measurement System (MEMS),” Mridul Gautam, Gregory J. Thompson, Daniel K. Carder, Nigel N. Clark, Robert Craven, and Donald W. Lyons, 11th CRC On-Road Emissions Workshop, San Diego, CA, Mar. 2001.

“The Coaxial Cavity Resonator as a Prototype RF IC Engine Ignition Source,” Dustin L. Mcintyre, Gregory J. Thompson, and James E. Smith, Society of Automotive Engineers Technical Paper No. 2001-01-0987, International Congress and Exposition, Detroit, MI, Mar. 2001.

“In-Cylinder Pressure Characteristics of Fischer-Tropsch and Conventional Diesel Fuels in a Heavy Duty CI Engine,” Christopher M. Atkinson, Gregory J. Thompson, Michael L. Traver, and Nigel N. Clark, Society of Automotive Engineers Technical Paper No. 1999-01-1472, International Fuels and Lubricants Meeting and Exposition, Dearborn, MI, May 1999.

“Transient Emission Comparison of Alternative Compression Ignition Fuels,” Nigel N. Clark, Christopher M. Atkinson, Gregory J. Thompson, and Ralph D. Nine, Society of Automotive Engineers Technical Paper No. 1999-01-1117, International Congress and Exposition, Detroit, MI, Mar. 1999.

“Simulation of a Continuously Variable Power Split Transmission,” Zhijian Lu, Gregory J. Thompson, Victor H. Mucino, and James E. Smith, Society of Automotive Engineers Technical Paper No. 1999-01-0062, International Congress and Exposition, Detroit, MI, Mar. 1999.

“Modelling Electromagnetic Reflections with NEC and XFDTD,” Robert P. M. Craven, Tao Guam, Khaled Elsherbini, Joseph Babbington, Greg Thompson, and James E. Smith, Proceedings of the IASTED International Conference on Modelling and Simulation, Pittsburgh, PA, May 1998.

“Thermal Modeling of an Axial Vane Rotary Engine,” Phillip H. Burnside, Gregory J. Thompson, and James E. Smith, Society of Automotive Engineers Technical Paper No. 980123, International Congress and Exposition, Detroit, MI, Feb. 1998.

“Crash Analysis Response of a Midsize Car Subjected to Side Impact,” Avinash Rao, Gregory J. Thompson, Victor H. Mucino, and James E. Smith, Society of Automotive Engineers Technical Paper No. 970783, International Congress and Exposition, Detroit, MI, Feb. 1997.

“Investigation of a Radio Frequency Plasma Ignitor for Possible Internal Combustion Engine Use,” Richard Stiles, Gregory J. Thompson, and James E. Smith, Society of Automotive Engineers Technical Paper No. 970071, International Congress and Exposition, Detroit, MI, Feb. 1997.

“Zero Dimensional Combustion Modeling of an Axial Vane Rotary Engine,” Jason Smith, Gregory J. Thompson, and James E. Smith, Society of Automotive Engineers Technical Paper No. 970069, International Congress and Exposition, Detroit, MI, Feb. 1997.

“Geometric Design and Analysis of an Axial Vane Rotary Compressor,” Raymond L. Orndorff, III, Gregory J. Thompson, and James E. Smith. The American Society of Mechanical Engineers International Congress and Exposition, Atlanta, GA, AES-Vol. 36, 1996.

“Mathematical Model of the Beta Rand Cam™ Engine Vane Seals,” Christopher H. Braden, Gregory J. Thompson, James E. Smith, and Victor H. Mucino, Alternate Fuels, Engine Performance and Emissions, The American Society of Mechanical Engineers, New York, ICE-Vol. 26-2, 1996.

“Sealing Analysis of the Beta Rand Cam™ Engine Vane,” Christopher H. Braden, Gregory J. Thompson, James E. Smith, and Victor H. Mucino. Computer Applications in Industry and Engineering, The International Society of Computers and Their Applications, Honolulu, HI, Nov. 1995.

“Rotor Shaft Bearing Analysis for Selected Rand Cam™ Engine Configurations,” Raymond Orndorff, Greg Thompson, James E. Smith, and Victor H. Mucino, Society of Automotive Engineers Technical Paper No. 950449, International Congress and Exposition, Detroit, MI, Feb. 1995.

“Hydrodynamic Mobility Analysis of the Vane Lift Mechanism for the Rand Cam™ Engine,” Victor H. Mucino, James E. Smith, Kanghua Sun, and Greg Thompson, Society of Automotive Engineers Technical Paper No. 950450, International Congress and Exposition, Detroit, MI, Feb. 1995.

“The Rand-Cam Engine: A Pistonless Four Stroke Engine,” Patrick Badgley, Gregory Thompson, Nigel N. Clark, Ralf Wohl, Victor H. Mucino, and James Smith, Society of Automotive Engineers Technical Paper No. 940518, International Congress and Exposition, Detroit, MI, Feb. 1994.

“General Design Considerations for the Rand Cam Engine,” Gregory J. Thompson, James E. Smith, Nigel N. Clark, Victor H. Mucino, and Ralf J. Wohl, Alternate Fuels, Engine Performance and Emissions, The American Society of Mechanical Engineers, New York, NY, ICE-Vol. 20, 1993.

“Engineering Modeling and Synthesis of a Rand Cam Engine Through CAD Parametric Techniques,” Victor H. Mucino, James E. Smith, and Gregory Thompson, Society of Automotive Engineers Technical Paper No. 930061, International Congress and Exposition, Detroit, MI, Mar. 1993.

“Basic Design of the Rand Cam Engine,” Nigel N. Clark, James E. Smith, Victor H. Mucino, Ralf Wohl, Gregory Thompson, Thomas McDaniel, and Jeffery Smith, Society of Automotive Engineers Technical Paper No. 930062, International Congress and Exposition, Detroit, MI, Mar. 1993.

“NGV Challenge II: An Improved Design for a Natural Gas Vehicle, West Virginia University 1992 NGV Challenge Team,” Thomas Bonazza, Cleve Bowie, Jim Kirwin, Tony Leonardo, Doug Marple, Tom Ostasiewski, Gregory Thompson, Kenny Vance, Kurt Van Voorhies, Dave Walton, Mike Williams, Ralf Wohl, Marshala Wright and James E. Smith, Enhancing Natural Gas Vehicle Technology 1992 Natural Gas Vehicle Challenge, Society of Automotive Engineers Special Publication, SP-929, Warrendale, PA, 1992.

“The NGV Challenge: A Controlled Environment For Natural Gas, West Virginia University NGV Challenge Team,” Andy Emborsky, Jim Kopasko, Robert McNaughton, Tom Ostasiewski, Jim Russell, Dave Seesdorf, Robert Smith, Gregory Thompson, Marshala Wright, and James E. Smith, Developing Dedicated Natural Gas Vehicle Technology 1991 Natural Gas Vehicle Challenge, Society of Automotive Engineers Special Publication, SP-894, Warrendale, PA, 1992.

“Modeling Methods for Low Prandtl Number Fluids Used in the Coatings Industry,” Greg Thompson, Randy Churchill and James Smith, 6th International Conference on CAD/CAM, Robotics, and Factories of the Future 1991, Southbank Press, London, UK, Vol. II, 1991.

3. Books, Monographs or Book Chapters

“Market Conditions and Design Advances in All-Wheel-Drive Vehicles,” Greg Thompson and James E. Smith, Introduction to All-Wheel Drive, SAE Handbook Supplement, HS-2300, Section 3, Warrendale, PA, Sept. 1992.

4. Other Publications

“Planners Have Eye on Mon count’s Future,” Cassie Shaner, The Dominion Post, Jan. 26, 2012.

The Rand Cam™ Engine Design Considerations, Gregory J. Thompson, Doctor of Philosophy Dissertation submitted to the College of Engineering, West Virginia University, Aug. 1995.

Momentum and Heat Transfer Characteristics of a Low-Prandtl-Number Fluid, Gregory J. Thompson, Masters Thesis submitted to the College of Engineering, West Virginia University, May 1991.