Figure 3. Sample of a Type 2 LOA Application using a RTCA/DO-200 Compliance The ACME Avionics Manufacturer PO Box 1 Nowhere, Arkansas 71953 FAA – Southwest Region 2601 Meacham Blvd Fort Worth, Texas, 76193 Manager, Aircraft Certification Office, ASW-150 Subject Request for New Type 2 Letter of Acceptance for ACME Company’s Aeronautical Data Process To Whom It May Concern The ACME Avionics Manufacturer is applying fora new Type 2 letter of acceptance for our aeronautical data process. We comply with AC A and RTCA/DO-200 and request your review of the enclosed data being submitted in support of this application. The ACME Avionics Manufacturer receives data from other sources, and develops navigation information per the data processes specified in ACME Documents XXX.XX and YYY.YY, respectively. Acceptance of our aeronautical data process is requested based on the specification and control of these data processes, compliance with AC A and the compatibility of the delivered data with the following products ACME FMS Model XY, P/N a ACME FMS Model Z, P/Ns 56789-1 through 56789-8 ACME has established compatibility with these systems based on the original software design documentation approved under the original TSO authorization. Compilation of data to the compatible format is accomplished using ACME Tool 123. The information will be developed at the ACME Avionics Manufacturer, 3000 Hill Street, Nowhere, Arkansas 71953. The ACME Avionics Manufacturer hereby certifies that the Data Processing Procedures, Quality Assurance, and Configuration Management processes, which are in accordance with RTCA/DO-200, sections 3, 4, and 5 have been established and the navigation information is produced in accordance with this system. Your efforts in support of this request are most appreciated. Sincerely, Administrator, ACME Avionics Manufacturer Enclosures 1 copy ACME drawings, tool summary, quality assurance manual, specifications and processes.
09/20/10 AC A Appendix 2 A2-1 Share with your friends: |