Author Christopher J. Shaw rn, mn contributors



Download 133.49 Kb.
Page3/5
Date31.01.2017
Size133.49 Kb.
#13518
1   2   3   4   5

Fitting the Walker





  1. Safety – Walkers are designed to fold flat so they are transportable. You will hear a click when you open each side of the walker. This click indicates the locking mechanism is in proper position and the walker is safe to use.




  1. Proper Fit – To ensure the walker is the proper height for you, stand in the walker with the cross bar in front of you. When your arms are relaxed at your sides the handgrips of the walker should be approximately level with your wrists. When grasping the handgrips, your shoulders should be level and relaxed and both arms should be just slightly bent at the elbows. All four legs of the walker are adjustable and the fitting process takes only a few minutes. This process will be demonstrated in the Total Joint Class.


To Stand Using A Walker





  1. Regardless of your weight bearing status you must place your surgical leg out in front of you before standing to prevent full weight bearing.




  1. To stand, use one hand to push up from the bed or chair, your other hand to push down on the walker while at the same time pushing up with your non-surgical leg.




  1. Once you are standing, place both hands on the walker handgrips and try to stand straight for a few moments to gain your balance.


Weight Bearing Status

After surgery your doctor will determine the amount of weight you may place on your surgical leg. This is your weight-bearing status and there are several that your doctor may order. They are:




  • Non-Weight Bearing – The foot of your surgical leg is kept off the floor. You may NOT put any weight on this leg. You will advance the walker then make a small hopping step on your non-surgical foot into the center of the walker.

  • Toe Touch Weight Bearing – The toes of your surgical leg touch the floor but no weight is placed on them. You first advance the walker, then your surgical leg, touching the floor with only your toes. Next, supporting all your weight on the walker, you step forward into the center of the walker with your non-surgical leg.

Using Your Walker




  • Partial Weight Bearing – You may place some weight on your surgical leg. Move the walker forward, step forward with your surgical leg placing some weight on it. Then, supporting the remainder of your weight on the walker, step forward into the center of the walker with your non-surgical leg.

  • Weight Bearing As Tolerated – You are allowed to place as much weight on your surgical leg as you can tolerate. Move the walker forward, step forward with your surgical leg and place as much weight as you can tolerate on your foot. Next, supporting the remainder of your weight on the walker, step forward into the center of the walker with your non-surgical leg.


Walker Safety


  • Before you take each step you must ensure that all four (4) legs of the walker are on the floor.




  • Your body must be inside the walker before you move to take each step.




  • Your toes should never pass the front crossbar of the walker to prevent losing your balance.




  • Move the walker a comfortable arms length in front of you. If you feel like you are reaching or bending forward to take a step, the walker is too far forward.




  • Wear well fitting shoes.

  • Never wear sandals, thongs, flip-flops, or high heels. Your footwear should have a back or strap that goes around the back of your foot/heel.

  • Make sure your footwear has a rubberized sole (something to create resistance between your feet and the floor).

  • Wear shoes that you have worn before, do not wear new shoes. You do not want to learn how to walk with a new joint while breaking in a new pair of shoes.

  • Your foot on your surgical leg may swell after surgery; thus, your footwear should have some room for swelling.

  • If you wear athletic shoes, your can use elastic shoe laces or use ¼ inch sewing elastic in place of your regular shoe laces. It will eliminate the hassle of tying your shoes.




  • Clear all walk ways in your home of throw rugs, phone cords, and extension cords to prevent falls.




  • If you have transition areas in your house where the floor surfaces change (i.e. carpet to tile or linoleum), ensure the surfaces are secured to the floor. Be careful not to trip or fall over these transitions.

Using Your Walker





  • If you must climb stairs in your home, tell the physical therapist so you can practice before you are discharged home. When you are climbing up you must lead with your non-surgical leg and step down using your surgical leg. You will be taught how to use the stairs while you are here.


Assistive Devices

After surgery bathing, dressing, and toileting may appear to be a major undertaking but with the right equipment and skills you will be able to adapt very easily. There are a great many assistive devices on the market today. The nursing staff and the physical therapist will demonstrate how to use certain assistive devices that can increase your independence following discharge from the hospital.



Dressing Devices

(dressing should be done in a seated position with the surgical leg dressed first. When undressing, the surgical leg should be undressed last).


*Long-Handled Reacher *Sock Aid *Dressing Stick


*Long Handled Shoe Horn





Download 133.49 Kb.

Share with your friends:
1   2   3   4   5




The database is protected by copyright ©ininet.org 2024
send message

    Main page