Bailey Infi90 Interface to the pi system

Bailey Infi90 Interface to the PI System

43
Baud Rate
The Baud Rate parameter specifies the data rate of the COM port. The only acceptable values are 1200, 2400, 4800, 9600, or 19200 bps.
(-baudrate=#)
Port
The Port parameter specifies the COM port of the Windows computer for communications to the Bailey CIU. Use a value of 1 for COM, a value of 2 for COM, and soon.
(-port=#)
CIU #
The CIU# parameter is a user-specified positive number that corresponds to a point’s Location attribute. Each instance of the Interface uses the Pointsource and CIU# parameters to identify uniquely its particular list of points to service.
(-CIU#=#)
CIU Type #
The CIUtype parameter specifies the CIU version number from 1 to 4, inclusive.
(-CIUtype=#, Default 3)
Debug Level
The Debug Level

parameter specifies the Interface's debugging level, from 0 to 3, inclusive. When Debug Level is nonzero, the Interface prints debugging messages. The higher the debugging level, the more messages the Interface prints.
(-debuglevel=#, Default 0 (no debugging))
# of exception calls before delay

Startup Command File
44
This parameter specifies the number of exception calls before delay, from 1 to 100, inclusive.
(-cnt=#, Default 20)
Time to delay between calls
This parameter specifies the number of seconds to delay between calls, from 0.1 to 30, inclusive.
(-delay=#, Default 2)
Enable Output Points
Select whether or not to enable Output Points. Enable enables them, 0 – Disable disables them.
(-outputflag=#, Default 1)
Enable exception screening
Check this box to enable CIU exception reporting screening.

Download 0.78 Mb.

Share with your friends: