Install an SSH client on PC-A and PC-C

Install an SSH client on PC-A and PC-C.

1. 
   If the SSH client is not already installed, download either TeraTerm or PuTTY.
   
2. 
   Save the application to the desktop.
   

3. Verify SSH connectivity to R1 from PC-A.

   1. 
      Launch PuTTY by double-clicking the putty.exe icon.
      
   2. 
      Input the R1 Fa0/1 IP address 192.168.1.1 in the Host Name (or IP address) field.
      
   3. 
      Verify that the SSH radio button is selected.
      

4. 
   Click Open.
   
5. 
   In the PuTTY Security Alert window, click Yes.
   
6. 
   Enter the admin username and password cisco12345 in the PuTTY window.
   

7. 
   At the R1 privileged EXEC prompt, enter the show users command.
   

What users are connected to router R1 at this time?

____________________________________________________________________________________

____________________________________________________________________________________

____________________________________________________________________________________

8. 
   Close the PuTTY SSH session window.
   
9. 
   Try to open a Telnet session to your router from PC-A. Were you able to open the Telnet session? Explain.
   

____________________________________________________________________________________

10. 
    Open a PuTTY SSH session to the router from PC-A. Enter the user01 username and password user01pass in the PuTTY window to try connecting for user who does not have privilege level of 15.
    

____________________________________________________________________________________

____________________________________________________________________________________

11. 
    Use the enable command to enter privilege EXEC mode and enter the enable secret password cisco12345.
    
12. 
    Disable the generation of system logging messages for successful login attempts.
    

4. 
   
   Download 171.4 Kb.
   
   Share with your friends: