CN51 Android os android™ 0 (Marshmallow)

CN51 Android Procedures

IMPORTANT NOTICES

If upgrading CN51 devices via a Mobile Device Management (MDM) product, follow the instructions provided by the MDM vendor.

CN51 device with Android 4.2.2 Jelly Bean operating system

Upgrade OS: full_CN51-ota-74.01.01.0006.zip.

CommonES: Honeywell_CommonES_Android_ReleaseMelbourne_4.01.00.3566.zip

• 
  Copy downloaded full_CN51-ota-74.01.01.0006.zip to a microSD card connected to a PC. Alternately, copy the downloaded file to the External SD card pre-installed on CN51 from a PC via USB MTP or other method
  
• 
  If necessary, power off the device and insert the SD card
  
• 
  Boot into the Recovery Menu
  
  • 
    Power on the device by pressing and holding the two left side keys, the top right side key (VOL+), and the power (I/O) key simultaneously.
    

• 
  Release the power I/O key and keep the other keys pressed until the green android robot is visible on the screen.
  
• 
  Select the recovery mode from that screen by using the left side keys to scroll up and down and pressing VOL+ to confirm
  
• 
  Once in recovery, if you do not see the text menu, activate the menu by pressing the red square key in the upper right of the keyboard.
  
• 
  Select ‘install update from external sdcard’ (using volume or arrow keys) and press enter key
  
• 
  Select the update zip filename full_CN51-ota-74.01.01.0006.zip
  
• 
  Select ‘Yes – Install’
  
• 
  After update, select ‘reboot system now’
  
• 
  After booting into OS, check Settings  About phone  Build number, to make sure the version you flash were updated. (Below is just a example, you will see the build version that you upgraded)
  

Common ES packages installation

1. 
   Obtain CommonES Honeywell_CommonES_Android_ReleaseMelbourne_4.01.00.3566.zip from the Downloads/Application section
   
2. 
   Copy the zip file into IPSM partition through USB MTP protocol, the path is honeywell/autoinstall/. Create the folder if you don’t have it in your IPSM partition
   
3. 
   Reboot the device, The device will check ES package in IPSM/honeywell/autoinstall/ after boot.
   

4. 
   If the ES package is detected and need install, the system will prepare the installation for ES package
   

5. 
   Then a reboot will happen, the device will start the installation from recovery
   

6. 
   After the installation finishes, it will boot to OS
   
7. 
   Check whether ES package is installed successfully, we will see a Demo application appear in your application list.
   

Licensing Installation:
On an unlicensed CN51 Android 6.0 device, the watermark ‘unlicensed software version…’ will be displayed on the screen as below.


Obtaining License: Order license from pricebook PN: 454-077-001. Follow instructions accompanying the license entitlement to create a license XML file using the Intermec License Manager (ILM) tool. ILM is available for free download from the Intermec web site. If upgrading multiple CN51s, all applicable serial numbers may be included in a single XML file that is distributed to all devices.
License installation

1. 
   Connect CN51 device with PC via Transfer files (MTP) USB connection.
   
2. 
   Copy the license bundles xml file (e.g. CN51 Android 6.0 License.xml) into the root directory of Internal Storage (e.g. Computer\CN51 QCF\Internal storage)
   

3. 
   Reboot the device.
   

3. 
   The license will be installed successfully in few seconds once the device boots into desktop. Then the watermark and notification will be removed.
   

Note: The license file copied into internal storage at Step 2 will be deleted immediately once the license is installed. And license will not be deleted if you do the factory reset.

Additional Information

The CN51 handheld computer manual and downloads are located at:

www.intermec.com | Products | Computers | Handheld Computers | CN51

Support Assistance

For product assistance or to report an issue/observation, contact Technical Support by calling 1-

800-755-5505 then option 4, 2. Outside North America, contact your normal support persons and

they will enter a Knowledge Central case. If you would like to submit an online case, follow this

link: http://intermec.custhelp.com/app/ask If you don’t have an account, one can be created via the link on the right hand side.

For more information about ADB, visit: http://developer.android.com/tools/help/adb.html.

For more information about USB Tethering, please see the latest CN51 Android User Guide. Available at: http://www.intermec.com/support/downloads/

Application Support
Common ES Tools:

Download Honeywell_CommonES_Android_ReleaseMelbourne_4.01.00.3566.zip from downloads/Application section

Honeywell Mobility SDK :

Download Honeywell_MobilitySDK_Android_CN51_v1.00.00.0021.zip from downloads/ Developer Tools section

EZ Config:

Download Honeywell_EZConfig_for_Mobility_Setup_r505.zip from downloads/ Console/Server Software section

Version History

Version	Date Available
74.01.01.0006	August 2016

Directory: downloads -> SWFiles
downloads -> Forth coming competitive exams
downloads -> Brush High School Morning Announcements Friday, September 05, 2014 all school
downloads -> Year 9 The Arts — Music
downloads -> Years 7 and 8 standard elaborations — Australian Curriculum: Music draft
downloads -> Chris Young sets 2016 “I’m Comin’ Over” Tour headlining dates
downloads -> Slavery and Abolition: the Plymouth Connection Introduction
downloads -> Summer Assignment
SWFiles -> CN51 os 34 Android™ 2 (Jelly Bean)
SWFiles -> CN51 Android os android™ 0 (Marshmallow)

Download 30.37 Kb.

Share with your friends: