Recognizing And Dealing With Conflicts 279

- If No (or the settings cannot be modified, go to Step 29. Step 24: Resource information is not available Decide which device you should disable. Because both devices need to use the same resource setting, you must decide which device you want to use. You must disable and/or remove the other device. It probably is easier to remove the device that had the original conflict. If you choose to remove the other device, you might see a message stating that you still have a conflict after completing the procedure. Just restart the procedure and continue resolving the conflict. Which device would you like to disable
- If you’d rather disable the original device, go to Step 30.
- If you’d rather disable the other conflicting device, go to Step 31. Step 25: Manual button not available Disable the conflicting hardware by removing it
1. On the hardware list, click the plus sign (+) next to the type of hardware that you want to disable. If you do not seethe hardware list, click Cancel until you return to it.
2. Click the hardware you want to disable.
3. Click Remove. Go to Step 19. Step 26: Free resources found Change the resource settings to utilize the free resources
1. Save the new setting by clicking OK, then clicking OK again.
2. If you see a message about restarting your computer, click No.
3.
Double-click the hardware that first had the conflict.
4. Click the Resources tab.
5.
Double-click the resource that is conflicting. If you see a message that says You must clear the Use Automatic Settings box before you can change a resource setting click OK to close the message, then clear the Use automatic settings box.
6. Change the resource setting to the value you just freed. The Conflicting device list
box might show a conflict with the other hardware that you just changed.
7. Click OK. If you see a message, click Yes to continue. Go to Step 19.

Download 1.89 Mb.

Share with your friends: