Composite wood windows



Download 229.84 Kb.
Page4/5
Date13.06.2017
Size229.84 Kb.
#20639
1   2   3   4   5

** NOTE TO SPECIFIER ** Specify subordinate or secondary items that aid and assist primary products specified above or are necessary for preparation or installation of those items.

      1. Accessories:

        1. Exterior Trim and Casing: Where indicated on Drawings, provide vinyl sheathed plywood in the following thickness, conforming to NIST Voluntary Product Standards P.S.1 and rigid vinyl channels.

          1. Thickness: 1/2 inch (12.7 mm).

** NOTE TO SPECIFIER ** Retain thickness above or below.

          1. Thickness: 3/4 inch (19 mm).

          2. Color: Match door framing.

          3. Vinyl Trim Board: 0.043 inch (1.09 mm) thick vinyl with lightly textured surface laminated with adhesive to 3/4 inch (19 mm) thick plywood.

** NOTE TO SPECIFIER ** Retain subparagraph above for andersen® vinyl trim board. Retain subparagraph below for vinyl laminated board.

          1. Vinyl Laminated Board: 0.045 inch (1.14 mm) thick vinyl with smooth surface laminated with adhesive to 1/2 inch (12.7 mm) thick plywood.

          2. Trim Channels: Rigid vinyl extrusions furnished by door manufacturer for use on same product line.

          3. Jamb Depth:

            1. Inswing 4-9/16 inches and 6 9/16 inch (116 mm).

            2. Outswing 4-9/16 inches (116 mm).

            3. Sidelights and Transoms 4-9/16 inches (116 mm).

        1. Interior Extension Jambs: Solid or veneered wood in the following species and depths:

** NOTE TO SPECIFIER ** Retain project required species subparagraph below and delete subparagraphs not required.

          1. Species: Maple.

          2. Species: Pine.

          3. Species: Oak.

          4. Species: Prefinished Pine.

** NOTE TO SPECIFIER ** Retain project required jamb width subparagraph below and delete subparagraphs not required.

          1. Jamb Width: Available in 1/16 inch (1.6 mm) depths up to 7-1/8 inches (181 mm):

        1. A-Series Outswing Door Panel Stop: Provide panel stops fabricated from the following species:

** NOTE TO SPECIFIER ** Retain project required color subparagraph below. Delete subparagraphs not required.

          1. Species: Pine.

          2. Species: Oak.

          3. Species: Maple.

          4. Species: Painted.

        1. A-Series Hinged Inswing and Outswing Door Threshold: Provide threshold fabricated from the following species:

          1. Species: Oak.

** NOTE TO SPECIFIER ** Retain species above or below.

          1. Species: Mahogany.

        1. Exterior Keyed Lock: 6-pin keyed lock system.

        2. Support Mullion Trim: 2 inch (51 mm) wide wood filler and vinyl trim strip.

          1. Color: Match door unit exterior color.

        3. Provide wood interior extension jamb members machined from clear or veneered, finger joined clear material approved in ANSI/AAMA/NWWDA 101/I.S.2. Pre-drill extension jambs for application.

      1. Insect Screens:

        1. Hinged Door Insect Screens: Provide hinged patio doors with an insect screen installed on exterior.

          1. Insect Screen Door Frame: 0.040 inch (1.02 mm) roll formed aluminum frame with chromate conversion coating.

          2. Hinged Insect Screen Door Frame for Single Panel and Active Passive Units: 0.040 inch (1.02 mm) extruded aluminum frame with chromate conversion coating. Provide hinged insect screen doors complete with hinges, closers, and latches.

          3. Double-Hinged Insect Screen: 0.040 inch (1.02 mm) aluminum frame with chromate conversion coating.

            1. Perma-Clean® Top Hung Gliding Insect Screens: Provide Inswing hinged patio doors with gliding insect screen installed on exterior for Active Stationary or 3 panel configurations.

          4. Insect Screen Cloth: 18 by 16 glass fiber mesh, charcoal color finish.

          5. Frame Finish:

** NOTE TO SPECIFIER ** Retain project required color subparagraph below. Delete subparagraphs not required.

            1. Color: White.

            2. Color: Sandtone.

            3. Color: Terratone® .

            4. Color: Forest Green.

            5. Color: Cocoa Bean.

            6. Color: Red Rock.

            7. Color: Black.

            8. Color: Prairie Grass.

            9. Color: Canvas.

            10. Color: Dove Grey.

          1. Rollers: Insect screen doors operate on injection molded bottom rollers with self contained leveling adjusters engaged in sill track.

          2. Operating Handles: Polycarbonate operating handles to receive locking mechanism in the following color.

** NOTE TO SPECIFIER ** Retain project required color subparagraph below. delete subparagraphs not required. "Polane" is a registered trademark of the Sherwin-Williams Company.

            1. Color: White.

            2. Color: Stone.

            3. Color: Forest Green.

            4. Color: Cocoa Bean.

            5. Color: Red Rock.

            6. Color: Black.

            7. Color: Prairie Grass.

            8. Color: Canvas.

            9. Color: Dove Grey.

          1. Polane® coating, 6063 aluminum extrusion with corner locks and drive rivet fastening system.

          2. Color: Match patio door unit exterior color.

        1. Outswing Door Insect Screens: Provide outswing hinged patio doors with retractable insect screen installed on interior jamb.

          1. Retractable Insect Screen Housing Assembly: Aluminum with white painted finish.

          2. Insect Screen Cloth: 18 by 16 glass fiber mesh, charcoal color finish.

** NOTE TO SPECIFIER ** Describe items that must be shop manufactured, fabricated, or assembled before being delivered to the site.

      1. Fabrication:

        1. Preservative Treatment: Treat wood frame and door panel wood members after machining with water repellent preservative per WDMA I.S.4.

        2. Frame Components:

          1. Attach reinforced engineered plastic frame cover to wood frame.

          2. Factory-applied urethane coating (2.6 mil minimum dry film thickness) to exterior exposed surfaces of sensitized, reinforced, engineered plastic frame cover.

        3. Door Panels:

          1. Stiles and Top Rails: Finger joined and edge glued wood core or LVL, 1-3/4 inches (44 mm) thick before milling. Provide solid wood edge strips, phenolic interior and exterior outer substrate, and veneered interior surface.

          2. Bottom Rails: Laminated construction consisting of veneer interior surface over laminated veneer lumber core with phenolic overlay interior and exterior outer substrate.

          3. Corner Fastening:

            1. Door Units: Joint/corners are secured with hardwood dowels and water-resistant structural adhesive.

            2. Sidelight and Transom Units: Multi-surface butt joint with adhesive, silicone and 2 wood screws.

          4. Door Panel Finish:

** NOTE TO SPECIFIER ** Retain appropriate option below or change to change to project staining section.

            1. Interior: Unfinished, natural clear veneer of the following species to receive field applied paint or stain finish as specified in the painting section.

            2. Interior: Natural clear veneer of the following species shall be prefinished.

** NOTE TO SPECIFIER ** Retain project required veneer subparagraph below. Delete subparagraphs not required.

              1. Species: Oak.

              2. Species: Maple.

              3. Species: Pine.

              4. Finish Type: Prefinished water based Painted or Stained interior.

                1. Prefinished Painted White Pine interior.

                2. Prefinished Painted Birch Bark interior.

                3. Prefinished Painted Prime interior.

                4. Prefinished stained clear coat interior.

                5. Prefinished stained Honey interior.

                6. Prefinished stained Cinnamon interior.

                7. Prefinished stained Russet interior.

                8. Prefinished stained Mocha interior.

                9. Prefinished stained Espresso interior.

            1. Exterior: Factory-applied, high durability, urethane coating in the following color:

** NOTE TO SPECIFIER ** Retain project required color subparagraph below. Delete subparagraphs not required.

              1. Color: White.

              2. Color: Sandtone.

              3. Color: Terratone® .

              4. Color: Forest Green.

              5. Color: Cocoa Bean.

              6. Color: Red Rock.

              7. Color: Black.

              8. Color: Prairie Grass.

              9. Color: Canvas.

              10. Color: Dove Grey finish.

        1. Sill: Reinforced Engineered Plastic "Fiberglass".

        2. Weatherstripping: Factory-applied to panel.

        3. Glazing: Factory-glazed with silicone glazing and interior wood glazing stops.

** NOTE TO SPECIFIER ** Select glass and grilles for windows and doors selected for project. Delete provisions not required for project.

    1. GLAZING AND GRILLES

      1. Glazing:

        1. General: Tempered insulating glass units certified through the Insulating Glass Certification Council as conforming to the requirements of IGCC. Provide dual sealed units consisting of polyisobutylene primary seal and silicone secondary seal. Provide metal spacers with bent or soldered corners.

** NOTE TO SPECIFIER ** Retain certification requirements paragraph above or below.

        1. General: Tempered insulating glass units certified through the Insulating Glass Manufacturers Association of Canada (IGMAC) conforming to the requirements of Canadian General Standards Board CAN/CGSB 12.8 or ASTM E2190. Provide dual sealed units consisting of polyisobutylene primary seal and silicone secondary seal. Provide metal spacers with bent or soldered corners.

** NOTE TO SPECIFIER ** Select between the following standard glazing options. Consult Andersen Corporation for additional glazing options. Consult Andersen Corporation for assistance in selecting appropriate glazing type.

        1. High-Performance™ Low-E4® Argon Gas Blend Filled Insulating Glass Units:

          1. Glass: Tempered insulating glass units consisting of an outboard and inboard lite of clear tempered glass conforming to ASTM C1048, Type 1, Class 1, q3, Kind FT.

          2. Magnetron sputtering vapor deposition (MSVD) TiO2 coating applied to the No. 1 surface.

          3. High-Performance Low-E4 Glass Coating: Magnetron sputtering vapor deposition (MSVD) Low-E coating applied to the No. 2 surface.

          4. Filling: Fill space between glass lites with argon gas blend.

          5. Protective removable polyolefin film applied to glass surfaces No. 1 and No. 4.

        2. High-Performance Low-E4 Sun Glass, Low SHGC, Argon Gas Blend Filled Insulating Glass Units:

          1. Glass: Tempered insulating glass units consisting of an outboard and inboard lite of clear tempered glass conforming to ASTM C1048, Type 1, Class 1, q3, Kind FT.

          2. Magnetron sputtering vapor deposition (MSVD) TiO2 coating applied to the No. 1 surface.

          3. High-Performance Low-E4 Sun Glass Coating: Magnetron sputtering vapor deposition (MSVD) Low-E coating applied to the No. 2 surface.

          4. Filling: Fill space between glass lites with argon gas blend.

          5. Protective removable polyolefin film applied to glass surfaces No. 1 and No. 4.

        3. SmartSun™Low-E Glass, Low SHGC, Argon Gas Blend Filled Insulating Glass Units:

          1. Glass: Tempered insulating glass units consisting of an outboard and inboard lite of clear tempered glass conforming to ASTM C1048, Type 1, Class 1, q3, Kind FT.

** NOTE TO SPECIFIER ** Where patterned glass is required for project, delete paragraph above and retain paragraph below with appropriate patterned glass type. Delete types not required for project.

          1. Glass: Tempered insulating glass units consisting of an outboard lite of clear tempered glass conforming to ASTM C1048, Type 1, Class 1, q3, Kind FT and the following patterned glass:

          2. Inboard Pattern Glass Lite:

            1. Cascade.

            2. Fern.

            3. Obscure.

            4. Reed.

          3. Air Space: 3/4 inch (19 mm).

          4. SmartSun™ Low-E Glass Coating: Magnetron sputtering vapor deposition (MSVD) Low-E coating applied to the No. 2 surface.

          5. Filling: Fill space between glass lites with argon gas blend.

        1. High-Performance™ Low-E4® SmartSun Glass, Low SHGC, Argon Gas Blend Filled Insulating Glass Units:

          1. Glass: Tempered insulating glass units consisting of an outboard and inboard lite of clear tempered glass conforming to ASTM C1048, Type 1, Class 1, q3, Kind FT.

** NOTE TO SPECIFIER ** Where patterned glass is required for project, delete paragraph above and retain paragraph below with appropriate patterned glass type. Delete types not required for project.

          1. Glass: Tempered insulating glass units consisting of an outboard lite of clear tempered glass conforming to ASTM C1048, Type 1, Class 1, q3, Kind FT and the following patterned glass:

          2. Inboard Pattern Glass Lite:

            1. Cascade.

            2. Fern.

            3. Obscure.

            4. Reed.

          3. Air Space: 3/4 inch (75 mm).

          4. Magnetron sputtering vapor deposition (MSVD) TiO2 coating applied to the No. 1 surface.

          5. High-Performance Low-E4 Sun Glass Coating: Magnetron sputtering vapor deposition (MSVD) Low-E coating applied to the No. 2 surface.

          6. Filling: Fill space between glass lites with argon gas blend.

          7. Protective removable polyolefin film applied to glass surfaces No. 1 and No. 4.

** NOTE TO SPECIFIER ** Select between the two impact resistant glass types if impact resistant glazing required.

        1. Monolithic Impact Glass:

          1. Impact Resistant Glazing: Provide impact resistant glazing that has been tested per ASTM E1996 large missile impact requirements.

          2. Glass: Impact resistant glass consisting of two (2) lites of clear annealed glass conforming to ASTM C1036, Type 1, Class 1, q3, Kind LA, laminated with 0.090 inch (2.3 mm) polyvinyl butyral interlayer in the following color:

** NOTE TO SPECIFIER ** Retain project required color below. Delete colors not required.

            1. Color: Clear.

            2. Color: Gray tinted.

          1. Protective removable polyolefin film applied to glass surfaces No. 1 and No. 2.

        1. Insulating Impact Resistant Glass:

          1. Impact Resistant Glazing: Provide impact resistant glazing that has been tested per ASTM E1996 large missile impact requirements.

          2. Glass: Insulating glass units consisting of an outboard lite of clear tempered glass conforming to ASTM C1048, Type 1, Class 1, q3, Kind FT, and a laminated inboard lite of cleared annealed glass conforming to ASTM C1036, Type 1, Class 1, q3, Kind LA, laminate with a 0.090 inch (2.3 mm) polyvinyl butyral interlayer.

          3. Magnetron sputtering vapor deposition (MSVD) TiO2 coating applied to the No. 1 surface.

          4. High-Performance Low-E4 Coating: Magnetron sputtering vapor deposition (MSVD) Low-E coating applied to the No. 2 surface.

** NOTE TO SPECIFIER ** Retain subparagraph above for standard low-e coating. Retain subparagraph below for sun low-e coating.

          1. High-Performance™ Low-E4® Sun Glass: Magnetron sputtering vapor deposition (MSVD) Low-E coating applied to the No. 2 surface.

          2. Filling: Fill space between glass lites with argon gas blend.

          3. Protective removable polyolefin film applied to glass surfaces No. 1 and No. 4.

      1. Grilles:

** NOTE TO SPECIFIER ** Interior grilles can be fixed or permanently applied Fibrex® material or wood as selected below. Fixed interior grilles must be used in conjunction with fixed exterior grilles. Consult specifications for grille material of adjacent unit for joined units of different types. Consult an Andersen representative for additional grille options.
** NOTE TO SPECIFIER ** Coordinate specifications for grille material of adjacent unit for joined units of different types. Refer to Andersen® Divided Light Pattern Guide for available divided light patterns and details. Exterior and interior colors can be different colors. Retain project required grille pattern subparagraph below and delete subparagraphs not required. Full divided light and Finelight grilles are not available for impact resistant glazed products.

        1. Full Divided Light Grilles: Fixed exterior and interior grilles with an anodized aluminum muntin bar, 1/2 inch (13 mm) wide, to match spacer within insulated glass unit where indicated on Drawings.

          1. Exterior Grille: Provide Fibrex material exterior grilles where indicated on Drawings. Install grilles on exterior of glass with adhesive tape to simulate true divided light muntin bars in the following color:

            1. Color: White.

            2. Color: Stone.

            3. Color: Sandtone.

            4. Color: Forest Green.

            5. Color: Black.

            6. Color: Coco Bean.

            7. Color: Dove Grey.

            8. Color: Canvas.

            9. Color: Red Rock.

            10. Color: Prairie Grass.

            11. Color: Dark Bronze

            12. Color: Terratone.

          2. Fixed Interior grille: Provide profiled wood grilles applied with adhesive tape to interior glass surface.

            1. Grille Type: Unfinished Maple.

            2. Grille Type: Unfinished Oak.

            3. Grille Type: Unfinished Pine.

            4. Grille Type: White Fibrex material.

            5. Grille Type: Primed wood.

            6. Grille Type: Finished wood.

              1. Finished Wood Type: Oak.

              2. Finished Wood Type: Pine.

              3. Finished Wood Type: Maple.

              4. Finish Color: Clear Coat.

              5. Finish Color: Honey Stain.

              6. Finish Color: Cinnamon Stain.

              7. Finish Color: Russet Stain.

              8. Finish Color: Mocha Stain.

              9. Finish Color: Espresso Stain.

              10. Finish Color: Andersen White Paint.

              11. Finish Color: Birch Bark Paint.

** NOTE TO SPECIFIER ** Retain project required grille width subparagraph below. Delete subparagraphs not required.

          1. Width: 3/4 inch (19 mm).

          2. Width: 7/8 inch (22 mm).

          3. Width: 1-1/8 inches (29 mm).

          4. Width: 2-1/4 inches (57mm).

          5. Pattern as indicated on Drawings.

        1. Simulated Divided Light Grilles: Fixed exterior grilles with fixed or removable interior grilles where indicated on Drawings.

          1. Exterior Grille: Provide Fibrex material exterior grilles where indicated on Drawings. Install grilles on exterior of glass with continuous adhesive tape to simulate true divided light muntin bars in the following color:

            1. Color: White.

            2. Color: Terratone.

            3. Color: Sandtone.

            4. Color: Black.

            5. Color: Coco Bean.

            6. Color: Dove Grey.

            7. Color: Canvas.

            8. Color: Red Rock.

            9. Color: Prairie Grass.

            10. Color: Forest Green.

            11. Color: Dark Bronze

** NOTE TO SPECIFIER ** Retain project required interior grille subparagraph below. Delete subparagraphs not required.

          1. Fixed Interior Grille: Provide profiled wood grilles applied with adhesive tape to interior glass surface.

            1. Grille Type: Unfinished Maple.

            2. Grille Type: Unfinished Oak.

            3. Grille Type: Unfinished Pine.

            4. Grille Type: White Fibrex material.

            5. Grille Type: Primed wood.

            6. Grille Type: Finished wood.

              1. Finished Wood Type: Oak.

              2. Finished Wood Type: Pine.

              3. Finished Wood Type: Maple.

              4. Finish Color: Clear Coat.

              5. Finish Color: Honey Stain.

              6. Finish Color: Cinnamon Stain.

              7. Finish Color: Russet Stain.

              8. Finish Color: Mocha Stain.

              9. Finish Color: Espresso Stain.

              10. Finish Color: Andersen White Paint.

              11. Finish Color: Birch Bark Paint.

          2. Removable Interior Grilles: Provide removable, hardwood maple divided light grilles where indicated on Drawings. Install removable grilles against interior glass, attached with metal fasteners or integral tabs to sash.

** NOTE TO SPECIFIER ** Delete wood species not required.

            1. Species: Oak.

            2. Species: Maple.

** NOTE TO SPECIFIER ** Delete wood finish not required.

            1. Finish: Unfinished.

            2. Finish: Clear coat finish.

            3. Finish: Stain Color - Cinnamon.

            4. Finish: Stain Color - Espresso.

            5. Finish: Stain Color - Honey.

            6. Finish: Stain Color - Mocha.

            7. Finish: Stain Color - Russet.

            8. Finish: Painted Color (Pine) - White.

            9. Finish: Painted Color (Pine) - Birch Bark.

            10. Finish: Painted Color (Pine) - Prime.

            11. Match window interior unit wood species and finish.

** NOTE TO SPECIFIER ** Retain project required Grille width subparagraph below. Delete subparagraphs not required.

          1. Width: 3/4 inch (19 mm).

          2. Width: 7/8 inch (22 mm).

          3. Width: 1-1/8 inches (29 mm).


Download 229.84 Kb.

Share with your friends:
1   2   3   4   5



The database is protected by copyright ©ininet.org 2024
send message
    Main page
following species
major different types