Council on archives international records management trust


Methods of Conducting Assessments



Download 339.47 Kb.
Page6/22
Date31.07.2017
Size339.47 Kb.
#25775
1   2   3   4   5   6   7   8   9   ...   22

Methods of Conducting Assessments


Interviews, questionnaires and discussions with focus groups are the three common methods used to carry out a risk assessment and impact analysis. The method chosen will depend in part on the organisation’s resources, its priorities, its size and staff and other factors. Interviewing is the most comprehensive method of conducting a business impact analysis; however, it is time-consuming and would not be practical in all situations. Questionnaires may produce uneven results because not all respondents actually fill out questionnaires completely, and some people may respond inadequately. Meeting with focus groups – small groups of people representing different departments or responsible for different activities within the organisation – can help planners understand specific functional areas, such as a particular department or office. Focus groups usually provide good analytical results without being too time consuming.

Interviews, questionnaires and discussions with focus groups are the three common methods used to carry out a risk assessment and impact analysis.

The information should be matched with the planners’ assessment of which business processes are more ‘vital’; then the results of the assessment can be analysed to determine just how vital each business function or process is to the organisation. Then the vital functions and processes can be addressed in the vital records programme. It is not practical or cost-effective to address all business functions in the plan; rather, it is best to describe only those necessary to support the organisation in the event of a business disruption or failure.



For more information on issues related to establishing project teams and conducting evaluations, see Strategic Planning for Records and Archives Services.

Activity 7

For your institution, identify three benefits and three drawbacks to each of the methods available for conducting a risk assessment and impact analysis: interviews, questionnaires and meetings with focus groups.

Which method would you choose for your institution, based on the benefits and drawbacks you have identified? Explain your reasoning.

Recommendations for Action


Once you have completed the risk assessment and impact analysis, the next step is to determine what should be done to protect records and information. Recommendations can be divided into long term (over several years), medium term (over three to five years), short term (within a year) and immediate (within the next few weeks). For example, a risk assessment might have identified water leaks as a probable hazard for the archival institution, because the pipes are aging and starting to crack. The potential threat could be extremely serious because the records are presently stored directly under the water pipes.

Once the risk assessment and impact analysis are completed, the next step is to develop recommendations for action.

The recommendations might be as follows:



  • long term: seek new storage facilities

  • medium term: replace pipes throughout

  • short term: repair pipes in worst condition

  • immediate: move records away from underneath pipes

cover tops of shelves with plastic sheeting

(to allow water to flow off in the event of a leak)

It is possible also to consider actions in terms of priority. It is not useful to box records if they are stored on the floor of a basement that is highly susceptible to leaks: to do so would probably just mean the boxes as well as the records would be damaged by water. Instead, it might be a better priority to move the records out of the basement or find a way to minimise the chance of leaks.

In general, records are best protected when the following protection is in place in the order presented below.



  1. The building is located in a safe area.

  2. The building is of high quality.

  3. Adequate security systems are in place.

  4. Adequate warning systems (such as fire or water detectors) are in place.

  5. The building, equipment and records are well maintained and well managed.

  6. Records are boxed and shelved adequately.

  7. Fire suppression systems are in place.

Remember, though, that even if the building’s location is not ideal or security systems are not in place, any actions that can be taken to protect are worthwhile. The best short term solutions do not have to be expensive or complicated. Moving records off the floor, placing plastic sheeting over shelves or moving boxes away from windows or doors can be as effective in an emergency as installing expensive water detectors or drainage systems.

Protecting Records and Archives


Regardless of the long-term actions required or the level of emergency planning underway, it is possible to take steps to prevent a potential emergency from becoming a disaster. A number of changes can be instituted to protect records, ensuring their safety on a day-to-day basis as well as in the event of an unforeseen circumstance. These measures range from the simple and quick to the expensive and time consuming.

Actions can be taken to prevent potential emergencies from becoming disasters.

Each institution will have to determine the best course of action to take, depending on its resources, needs and potential risks. The common actions involve protecting records from damage caused by water, fire, hazards such as armed conflicts and abuse or mishandling.



For more information on the physical protection and care of records in general, see Preserving Records.

Protection from Water


Water damage can severely hinder the materials in the care of a records office, records centre or archival institution. All buildings will have some sort of water system in them, whether it be heating and cooling systems, washrooms or drainage systems. To reduce the risk of water damage, the following steps can be taken.

  • Do not store records or archives directly next to or under water pipes.

  • Inspect and repair water systems regularly.

  • Ensure water control systems are easily accessible and their location known to all staff so water can be turned off in the event of a leak or flood.

  • Make floors waterproof whenever possible, and keep all materials off the floor and on shelves. In particular, ensure that records are kept at a level higher than water could reach in the event of a flood.

  • Install drainage direct to the exterior or away from records storage areas, even if this means directing water drainage into other part of the building.

  • Install water alarms if possible to detect the presence of water, but do not rely exclusively on alarms and stop inspections.

  • Store materials in containers such as boxes whenever possible, to reduce the impact of water damage.

  • Take particular care when building construction or repair work is underway that records are protected from accidental water damage.

  • If materials are damaged by water, take all necessary steps to dry them and reduce the chance of mould growth.

For more information on mould damage, see Preserving Records.



Activity 8

Inspect a specific records storage area in your institution and indicate if you feel the records or archives in that area are at any danger from water damage. Using the terms used in this lesson, identify if the risk is extreme, very high, medium, low or negligible. Then, name four actions you could take right away to reduce the risk of water damage.




Download 339.47 Kb.

Share with your friends:
1   2   3   4   5   6   7   8   9   ...   22




The database is protected by copyright ©ininet.org 2024
send message

    Main page