NOTE:Graphics is not supported with E series processors and cannot be enabled on Dell servers due to restriction in the chipset.NOTE

Memory subsystem
T150 supports up to 4 DIMM slots, with up to UDIMM 128 GB of memory and speeds of up to 3200 MT/s.
Topics:
•
Supported memory
•
Memory speed
Supported memory
The table below lists the memory technologies supported by the platform.
Table 4. Supported memory technologies
Feature
T150 (DDR4)
DIMM Type
UDIMM
Transfer Speed MT/s, 2933 MT/s, and 3200 MT/s
Voltage
1.2 V (DDR4)
The following table lists the supported DIMMs for the Tat launch. For the latest information about supported DIMMs, seethe Memory NDA Deck. For information about memory configuration, post RTS, seethe Dell EMC PowerEdge T Installation and Service Manual at www.dell.com/poweredgemanuals
Memory speed
The table below lists the performance details for T based on the quantity and type of DIMMs per memory channel.
Table 5. DIMM performance
DIMM type Rank
Capacity
DIMM rated voltage and speed DIMMs per Channel
(DPC)
UDIMM
1R
8 GB GB
DDR4 (1.2 V, 3200 MT/s
3200 MT/s
2R
32 GB
DDR4 (1.2 V, 3200 MT/s
3200 MT/s
5
16
Memory subsystem

Storage
Topics:
•
Storage controllers
•
Supported drives
•
Internal storage configurations
•
External storage
Storage controllers
● PowerEdge Hardware RAID controllers (PERC) series 10, 11 are designed for Enhanced performance Fault tolerance Simplified management of RAID array drives PowerEdge controller series 10, 11 support older legacy SAS and SATA drive interfaces Dell Sis software RAID solution for PowerEdge systems.

Download 5.7 Mb.

Share with your friends: