Dov leshchinsky



Download 0.65 Mb.
Page4/5
Date14.11.2017
Size0.65 Mb.
#34036
1   2   3   4   5

Reports






Arellano, D., Stark, T. D., Horvath, J. S., and Leshchinsky, D. Guidelines for Geofoam Applications in Slope Stability Projects. NCHRP Project No. 24-11(02), Transportation Research Board of the National Academies, Washington, D.C., 2011 (Released in April 2013).






Arellano, D., T.D. Stark, J.S. Horvath, and D. Leshchinsky. Guidelines for Geofoam Applications in Slope Stability Projects. NCHRP Project 24-11(02) Interim Report. Transportation Research Board of the National Academies, Washington D.C., 2009.






Folliard, K.J., Trejo, D., Halmen, C. Sabol, S., Leshchinsky, D. Development of a Recommended Practice for Use of Controlled Low-Strength Material in Highway Construction. NCHRP Report 597, ‘08.






Stark, Arellano, Horvath, Leshchinsky, “Guidelines and Recommended Standard for Geofoam Applications in Highway Embankments,” NCHRP Report 529, ‘04.






Voluva, C. and Leshchinsky, D., “Effects of Geosynthetic Reinforcement Spacing on the Performance of Mechanically Stabilized Earth Walls,“ FHWA-03-048, ‘04.






Stark, T.D., Arellano, D., Horvath, J.S. and Leshchinsky, D., “Guidelines for Geofoam Application in Embankment Projects,” NCHRP Project No. 24-11, ‘02.






Shulley, S, Leshchinsky, D., and Ling, H. I. "Effects of Short Polymeric Fibers on Crack Development in Clays," Geotechnical Laboratory, US Army Corps of Eng., Waterways Experiment Station, REMR-GT-25, January 1997, Vicksburg, MS.






Leshchinsky, D., "Design Procedure for Geosynthetic Reinforced Steep Slopes," Geotechnical Laboratory, US Army Corps of Eng., Waterways Experiment Station, REMR-GT-23, January 1997, Vicksburg, Mississippi.






Leshchinsky, D., "Use of Geocomposite Drainage Systems as Temporary Measure to Improve the Surficial Stability of Levees,” Geotechnical Laboratory, Waterways Experiment Station, US Army Corps of Eng., Technical Report REMR-GT-24, October 1996.






Leshchinsky, D. and Leshchinsky, O., "Geosynthetic Confined Pressurized Slurry (GeoCoPS): Supplemental Notes for Version 1.0," Report TR CPAR-GL-96-1, September 1996, US Army Engineer Waterways Experiment Station, Vicksburg, Mississippi.






Leshchinsky, D., "Descriptors for Granular Bottom Sediments to be Dredged," June 1994, Contract Report DRP-94-3, Dredging Research Program, Waterways Experiment Station, Vicksburg, Mississippi.






Richter, S.D. and Leshchinsky, D., "Hydraulically Transported Clay Balls," April 1994, Contract Report DRP-94-1, Dredging Research Program, Waterways Experiment Station, Vicksburg, Mississippi.






Leshchinsky, D., "Compaction of Crust Material: Field Test Results," March 1991, submitted to the Geotechnical Laboratory, Soil Mechanics Division, Waterways Experiment Station, Vicksburg, Mississippi.






Jewell, R.A. and Leshchinsky, D., "North American Design Guide for Steep Reinforced Slopes," March, 1991, Report No. OUEL 1879/91, Soil Mechanics Report No. 118/91, University of Oxford, Dept. of Eng. Science, Oxford, UK.






Leshchinsky, D., "Load‑Elongation of High‑Strength Geotextiles: Calibration Curves," Sept. 1988, submitted to the Geotechnical Laboratory, Soil Mechanics Division, Waterways Experiment Station, Vicksburg, Mississippi, Contract No. DACW3988M2195.






Leshchinsky, D., "Guide Specification for Geotextile Reinforced Retaining Walls," Sept. 1987, prepared for the Soil Mechanics Division, U.S. Army Corps of Engineers, Waterways Experiment Station, Vicksburg, Mississippi.






Leshchinsky, D., "Short ‑ Term Stability of Reinforced Granular Embankment Over Clayey Foundation," Oct. 1986, prepared for the Pavement Systems Division, U.S. Army Corps of Engineers, Waterways Experiment Station, Vicksburg, Mississippi.






Leshchinsky, D., "Design Manual for Geotextile‑Retained Earth Walls," Sept. 1985, Research Report CE85‑51, Department of Civil Engineering, University of Delaware. (NTIS Order #ADA191510)






Chrismer, S.M., Leshchinsky, D. and Saxena, S.K., "Performance Tests for Geotextiles in Railroad Track," Report #R‑607, Association of American Railroads, Research and Test Dept., Chicago, Ill., Sept., 1985.






Leshchinsky, D., "Geotextile Reinforced Earth: Analytical and Experimental Study," Research Report #CE84‑44, Department of Civil Engineering, University of Delaware, July 1984.






Leshchinsky, D., "Geotextile Reinforced Earth: Numerical Procedure," Research Report CE84‑45, Department of Civil Engineering, Univ. of Delaware, July ’84.






Leshchinsky, D., "Development of a Track Quality Index," Association of American Railroads ‑ Technical Center, Report WR‑100, February 1982.






Leshchinsky, D., "The El Dorado Line Change ‑ Field Test Results," Association of American Railroads ‑ Technical Center. Report submitted to the Atchison, Topeka and Santa Fe Railway, January 1982.






Leshchinsky, D., "Development of Predictive Equations for Lateral Track Behavior," Association of American Railroads ‑ Technical Center, Report R‑481, June 1981.




Presentations






“Lessons Learned from Failed MSE Walls,” “Seismic Performance of Geosynthetic Reinforced Earth Structures,” Lessons Learned from Exhumed Geogrid Reinforced Wall,” FHWA, Vancouver, Washington, March, 2013






“Lessons Learned from Failed MSE Walls,” Dept. of Civil and Construction Engineering, Oregon State University, February, 2013






“Lessons Learned from Failed MSE Walls,” ”Case History: Construction of Reinforced Embankment over Soft Soil,” Indiana DOT, Indianapolis, January 29, 2013






“Lessons Learned from Failed MSE Walls,” Invited Keynote Lecture, International Symposium on Geotechnical Engineering for High-Speed Transportation Infrastructure, Zhejiang University, October 2012, Hangzhou, China






The 7th Sun Jun Distinguished Lecture: “Lessons Learned from Failed MSE Walls,” Tongji University, Shanghai, China, October 2012






“Selected Topics in Soil Reinforcement,” Half-day Workshop, Tierra Armada, Lima, Peru, September 2012






“Mechanically Stabilized Earth Walls: Global Acceptance?,” Keynote Lecture, Inauguration of Freyssinet Tierra Armada, Lima, Peru, Sept. 2012






“Design and Analysis of Geotextile Tubes,” Maccaferri International, Hagerstown, Maryland, August 2012.






“New Tools for Ultimate Limit State Design,” Delaware Valley Geo-Institute (DVGI), ASCE, Philadelphia, Pennsylvania, May 2012.






“Lessons learned from failed MSE walls,” Keynote and Opening Lecture, GeoAmericas 2012 Conference, Lima, Peru, May 2012






“Efficient Methodology to Determine Geosynthetic Layout in Reinforced Earth Structures,” Keynote lecture, International Conference on Highway Engineering, Bangkok, Thailand, April 2012






“Lessons learned from failed MSE walls,” Acadia Geotechnical Company, Prague, the Czech Republic, March 2012






“Successful and Unsuccessful Design and Construction Practice of MSE Walls,” Keynote Lecture, Experience, Practical Adjustments and Case Studies, 2nd International Conference, Czech Technical University, Prague, the Czech Republic, February 2012






“New Tools for Ultimate Limit State Design,” Capitol Chapter, Geotechnical Section, ASCE, McLean, Virginia, February 2012.






“Topics in Geosynthetics Reinforced Earth Structures,” Keynote Lecture, 23rd Annual Polytechnic Torino Italian Geotechnical Conference, Nov. 2011.






“Lessons learned from failed MSE walls,” Keynote Lecture, 43rd Annual Geotechnical Conference, Kansas, November 2011.






“The Safety Map tool,” Fugro Geoconsulting, Brussels, Belgium, June 2011.






“The Safety Map tool,” Université catholique de Louvain, Belgian Geotechnical Society, Belgium, June 2011.






“Lessons learned from failed MSE walls,” University of Colorado, Boulder, April 2011.






“Seismic Performance and Design of MSE Walls,” University of Colorado, Boulder, April 2011.






Seismic Performance and Design of MSE Walls,” NJ ASCE, Newark, NJ, March 2011.






“Basic Design of Geosynthetic Reinforced Segmental Walls,” Czech Technical University, Prague, December 2010.






Performance of Geocell Retention Systems Subjected to Seismic Loading,” Technion – Israel Institute of Technology, Haifa, Israel, November 2010.






“Lessons learned from failed MSE walls,” 5th Ibero-American Congress on Erosion and Sediment Control, Panama City, Panama, October 2010.






Design of Reinforced Walls and Slopes,” 1-Day Workshop, preconference course, 5th Ibero-American Congress on Erosion and Sediment Control, Panama City, Panama, October 2010.






Design of Reinforced Walls and Slopes,” 1-Day Workshop for Thailand DOH, Bangkok, August 2010.






“Lessons learned from failed MSE walls,” International Conference on Slopes – Keynote Lecture, Chiang Mai, Thailand, July 2010.






Design of Reinforced Walls and Slopes,” 2-Day Workshop, sponsored by Layfield, Edmonton, Canada, July 2010.






Exhumed Geogrid-Reinforced Retaining Wall: Lessons Learned,” Technion – Israel Institute of Technology, Haifa, Israel, June 2010.






Seismic Performance of Geosynthetic Reinforced Structures,” National Conference on Geosynthetics – Invited Lecture, Istanbul, Turkey, June 2010.






Exhumed Geogrid-Reinforced Retaining Wall: Lessons Learned,” Capitol Chapter, Geotechnical Section, ASCE, McLean, Virginia, May 2010.






“Exhumed Geogrid-Reinforced Retaining Wall: Lessons Learned,” Delaware Valley Geo-Institute, Philadelphia, Pennsylvania, May 2010.






Lessons Learned from Failed MSE Walls,” South West Geotechnical Conference, FHWA, Baton Rouge, Louisiana, April 2010.






Design of Reinforced Walls and Slopes,” 1-Day Workshop for Florida DOT (Gainesville; workshop also broadcasted via video to 4 districts in Florida)), February 2010.






Lessons Learned from Failed MSE Walls,” The University of Hong Kong, January 2010.






Design of Reinforced Walls and Slopes,” 1-Day Workshop to about 25 engineers, Tolunay-Wong Engineers, Houston, Texas, December 2009.






Design of Reinforced Walls and Slopes,” 1/2-Day Workshop in each Sao Paulo, Rio De Janeiro, and Belo Horizonate, Brazil, to a total of about 400 engineers, August 2009.






New Trends in Design of Geosynthetic Reinforced Walls” and “Design and Analysis of Geotextile Tubes,” Husker Engineering Meeting, Gescher, Germany, June 2009.






“Seismic Performance of Geosynthetic Reinforced Structures,” CalTrans, Sacramento, California, April 2009.






Design of Reinforced Walls and Slopes,” 1/2-Day Workshop to a total of about 50 engineers, DOT, Ho Chi Minh City, Vietnam, March 2009.






Seismic Performance of Geosynthetic Reinforced Structures,” Delaware Valley Geo-Institute, ASCE, March, 2009.






Performance of Geocell Retention Systems Subjected to Seismic Loading,” Committee of Geosynthetics, TRB, Washington, DC, January, 2009.






“Failure of MSE Walls,” CH2MHILL, Chantilly, Virginia, January, 2009.






Design of Reinforced Walls and Slopes,” 2-Day Workshop to a total of 16 engineers, South Carolina DOT, Columbia, SC, December 2008.






Analysis and Design of Geotextile Tubes,” Workshop on Geotextile Tubes held in Mississippi State University, Columbus, MS, November, 2008, sponsored by the Homeland Security Office.






Lessons Learned from Failed MSE Walls,” Capitol Section of Geotechnical Engineering, ASCE, McLean, Virginia, October 2008.






“Seismic Performance of Geosynthetic Reinforced Earth Structures,” Invited Lecture at the Annual Conference of Structural Engineering Association of Hawaii (SEAS), Maui, Hawaii, August 2008.






Design of Reinforced Walls and Slopes,” 1-Day Workshop sponsored by Hawaii Masonry Association, Honolulu, Hawaii August 2008.






Design of Reinforced Walls and Slopes,” 2-Day Workshop, Kansas DOT, Lawrence, Kansas, August 2008.






Seismic Behavior of Geocell Retention Systems,” Invited Lecture, GeoAsia, Shanghai, China, June 2008






“Design of Geosynthetic Reinforced Walls and Slopes,” GeoAsia (short course), Shanghai, China, June, 2008






“Failure of MSE Walls,” Chang’an University, Xi’an, China, June 2008






Failure of MSE Walls,” Association of Metallically Stabilized Earth (AMSE), Dallas, Texas, June 2008






Lessons Learned from Failed MSE Walls,” New York City Metro Section of Geotechnical Engineering, ASCE, The 33rd Martin S. Kapp Lecture, Jan. 2008






Design of Reinforced Walls and Slopes,” 2-Day Workshop to a total of about 60 engineers, Bangkok, Thailand, January 2008.






Design of Reinforced Walls and Slopes,” 1-Day Workshop to a total of about 50 engineers, Hanoi, Vietnam, January 2008.






Design of Reinforced Walls and Slopes,” 2-Day Workshop to a total of 22 engineers, Oregon DOT, Salem, Oregon, July 2007.






“Design of Reinforced Walls and Slopes,” 2-Day Workshop to a total of 12 engineers, Delaware DOT, Dover, Delaware, June 2007.






Lessons Learned from Failed MSE Walls,” Institut für textile Bau- und Umwelttechnik, Greven, Germany, June 2007






“Lessons Learned from Failed MSE Walls,” Technion-Israel Institute of Technology, Faculty of Civil Engineering, Haifa, Israel, May 2007.






Lessons Learned from Failed MSE Walls,” KU, Kansas, May 2007.






Design of Reinforced Walls and Slopes,” 1-Day Workshop to a total of 36 engineers, Guatemala City, Guatemala, April, 2007.






Design of Reinforced Walls and Slopes,” 1-Day Workshop to a total of 36 engineers, Santiago, Chile, March, 2007.






Lessons Learned from Failed MSE Walls,” 55th Annual Geotechnical Engineering Conference, University of Minnesota, St. Paul, March 2007.






Design of Geosynthetic Reinforced Walls and Slopes,“ ½-Day Workshop to a total of 60 engineers, University of Minnesota, Continuing Education and Conference Center, March 2007.






Mechanically Stabilized Earth Walls & Reinforced Soil Slopes" (LRFD and ASD Design Approaches), 3-Day Course to 36 engineers, Outreach Program, College of Engineering, University of Delaware, March 2007.






“Lessons Learned from Failed MSE Walls,” Tokyo University of Science, Japan, March 2007.






Analytical Framework for Design of Flexible Reinforced Earth Structures”, ASCE, GeoDenver Conference, Feb. 2007.






“Lessons Learned from Failed MSE Walls,” Gilmore & Associates, New Britain, Pennsylvania, February 2007.






“Lessons Learned from Failed MSE Walls,” Technical University ETH, Zurich, Switzerland, January 2007.






Design of Reinforced Walls and Slopes,” 1-Day Workshop to a total of 70 engineers, Budapest, Hungary, January, 2007.






“Design of Reinforced Walls and Slopes,” 1-Day Workshop to a total of 50 engineers, Warsaw, Poland, January, 2007.






Design of Reinforced Walls and Slopes,” 1-Day Workshop to a total of 35 engineers, Piestany, Slovakia, January, 2007.






“Large scale shake table tests on geocell walls,” GRI Conference, Washington DC, January, 2007.






Design of Reinforced Walls and Slopes,” 1-Day Workshop to a total of 34 engineers, Bogota, Colombia, November, 2006.






“Lessons Learned from Failed MSE Walls,” Delaware Valley Geo-Institute, ASCE, November, 2006.






“Design of Reinforced Walls and Slopes,” 1-Day Workshop to a total of 35 engineers, Seoul, Korea, August, 2006.






Design of Reinforced Walls and Slopes,” 1-Day Workshop to a total of about 10 engineers, Maryland State Highway Authority, Baltimore, June 2006.






“Case Histories: Failures of MSE Structures,” Tsinghua University, Beijing, China, June 2006.






Analytical Design Framework for the Design of Geosynthetic Reinforced Earth Structures,” Keynote presentation in GeoShanghai, China, ASCE, June 2006






Design of Reinforced Walls and Slopes,” 1-Day Workshop to a total of about 50 engineers, Lima, Peru and Panama City, Panama, April 2006.






“Shaking Table Tests on Large MSE Walls,” Keynote Lecture, Geotechnical Symposium in Roma – Tatsuoka Symposium, March 16-17, 2006, Rome, Italy.






Demonstration of Example Problem,” MSE Demonstration Session, GeoCongress, ASCE, Atlanta, Georgia, February 2006.






“Case Histories of Failed MSE Structures,” The Dongju Lee Memorial Lecture, Department Civil Engineering and Engineering Mechanics, Columbia University, NYC, February 2006.






Design of Geosynthetic Reinforced Walls and Slopes,” 2-Day Workshop to FHWA engineers in Vancouver, Washington, January, 2006.






“Design of Geosynthetic Reinforced Walls and Slopes,” 1-Day Workshop organized by Asian Institute of Technology, Bangkok, Thailand, December ’05.






LRFD versus ASD in MSEW Design,” Ohio Transportation Engineering Conference (OTEC), October 2005.






“Design of Geosynthetic Reinforced Walls,” 1-Day Workshop given the European engineers of Naue Fasertechnik, Luebbecke, Germany, August ‘05.






Design Framework for Geosynthetic Reinforced Earth Structures”, Baton Rouge, Louisiana, Symposium Honoring R. M. Koerner, Engineering Mechanics Conference, ASCE and ASME, June 2005.






Geosynthetic Reinforced SRW”, Australia, 5-hour seminar in each of these cities: Melbourne, Sydney, and Brisbane. Sponsored by C&M (Australia) and Allan Block (USA). May, 2005.






“Seismic Performance of SRW Retaining Walls,” Geomechanics Group, Auckland, New Zealand, February 2005.






Fundamentals of Soil Reinforcement”, New Zealand, 1-Day Workshop in each of these cities: Auckland, Wellington, Nelson, and Christchurch. Sponsored by New Zealand Institute of Highway Technology (NZIHT); over 130 engineers attended. February 2005.






Practical Solutions to Highway Engineering Problems,” Bangkok, Thailand, Department of Highways, January 2005.






“Fundamental of Soil Reinforcement,” Aschaffenburg, Germany, 1-Day Workshop to 30 engineers from 6 countries in Europe, August 2004.






Pseudo-Static Slope Stability Analysis & Shaking Table Test Results on SRW”, ASCE Geotechnical Section, San Diego, June 2004.






“Reinforced Walls and Slopes Technology,” Naresuan University, Phitsanulok, Thailand, June 2004.






Overview of Specialty Software in Geotechnical Problems,” 1-Day Workshop to Nebraska Department of Roads, Lincoln, Nebraska, May 2004.






“Large Scale Shaking Table Test Results on SRW” and “Geosynthetic Design Software,” Vancouver, Seattle, and San Francisco, April 2004.






Fundamental of Soil Reinforcement,” Carlsbad, California, 1-Day Workshop to 80 geotechnical engineers in Orange and San Diego counties, February 2004.






“Large Scale Shaking Table Test Results on SRW,” Annual Meeting of NCMA, Atlanta, February 2004.






Training on Using Specialty Software in Geotechnical Problems,” 1-Day Workshop to FHWA Geotechnical Engineers, Atlanta, Georgia, February 2004.






“Fundamental of Soil Reinforcement,” 1.5-Day Workshop to 30 worldwide practitioners in soil reinforced structures in Bangkok, Thailand, January 2004.






Limited Space Reinforcement: Design Implications,” The 17th Geosynthetic Research Institute Conference, Las Vegas, December, 2003.






”Analysis of Multitiered Reinforced Walls,” Annual Meeting of the Ohio Valley Geotechnical Group, Lexington, Kentucky, September, 2003.






Use of ReSSA and FoSSA Software in Transportation Problems,” Annual Mid-West DOT Meeting, La-Crosse, Wisconsin, October 2003.






Case History: Design, construction and Performance of Reinforced Embankment Over Soft Soil,” Conference on Soft Soil, Kuala Lumpur, Malaysia, July, 2003.






Reinforced Soil,” Etsong, Qingdow, China, March 2003






“Shaking Table Tests on Reinforced Soil Walls and Multitiered Walls,” NCMA meeting, Salt Lake City, February, 2003.






Shaking Table Tests on Reinforced Soil Walls,” TRB annual meeting, A2K07 Committee, Washington, DC, January 2003.






Multitiered Reinforced Soil,” 7th International Conference on Geosynthetics, Nice, France, September 2002.






AASHTO Seismic Design of MSE Walls,” 7th International Conference on Geosynthetics, Nice, France, September 2002.






Design of Geosynthetic Reinforced Structures,” Taiwanese Society of Geosynthetics, 8 hours including simultaneous translation to Chinese, Taipei, Taiwan, July, 2002.






Design of Geosynthetic Reinforced Structures,” Taiwanese Society of Geosynthetics, 6 hours including simultaneous translation to Chinese, Kaosiung, Taiwan, July, 2002.






Geosynthetic Reinforced Earth Structures,” International Geosynthetics Society, Korean Chapter, Seoul, Korea, May 3, 2002.






Dimensioning of Reinforced Soil Structures,” Huesker Partners Meeting, Phuket, Thailand, April 12, 2002.






“Performance of Reinforced Soil Structures Under Seismic Loading,” National Science Foundation Workshop, Antalya, Turkey, March 24, 2002.






Effects of Reinforcement Spacing on the Failure Mechanisms of Geosynthetic Reinforced Walls,” FHWA-NCMA Workshop, Turner-Fairbank Research Center, McLean, Virginia, January 2002.






Design Dilemma: Use Peak or Residual Strength in Geosynthetic Reinforced Structures?” IS-Kyushu, Japan, November 2001.






“Concluding Remarks on Design of Reinforced Earth Structures,” IS-Kyushu, Japan, November 2001.






“Design of MSE Block Walls,” Colbond, Arnhem, Holland, May 2001.






Effects of Reinforcement Spacing on the Failure Mechanisms of Geosynthetic Reinforced Walls,” TRB, Washington, January 2001.






“Design of geosynthetic reinforced walls,” ASCE, National Geotechnical Conference in Denver, August 2000.






Design Enhanced Software for Reinforced Walls and Slopes,” Technion-Israel Institute of Technology, Haifa, June 2000.






“On the Safety Factor in Reinforced Steep Slopes,” ASCE, National Geotechnical Conference in Denver, August 2000.






Selecting and Ensuring Geosynthetic Properties Relevant for Specific Applications,” Keynote at Huesker Meeting, Bangkok, Thailand, June 2000.






“Some US Experience with Geotextile Tubes, Bags and Containers,” Huesker Partners Meeting, Bangkok, Thailand, June 2000.






Design Enhanced Software for Reinforced Walls and Slopes,” Geotechnical section of ASCE, Utah Chapter, Salt Lake City, May, 2000.






“Stability of Geosynthetic Reinforced Steep Slopes,” ETH, Technical University of Switzerland, Zurich, April 2000.






The Design Engineer and Quality Assurance,” Symposium on Technology – Driving the Future, sponsored by Techtextil, Atlanta, March 24, 2000






“MSEW and RSS: Design Software,” presentation at a workshop at the TRB meeting, Washington, DC, January 2000.






Design Enhanced Software for Reinforced Walls and Slopes,” Geotechnical section of ASCE, Atlanta Chapter, January, 2000.






“Stability of Geosynthetic Reinforced Steep Slopes,” Keynote lecture, International Symposium on Slope Stability Engineering, Matsuyama, Japan, November, 1999.






Case History of Reinforced Embankment over Soft Soil,” Japanese Society of Soil Mechanics, Kyushu Chapter, Fukuoka, Japan, November 1999.






“Stability and Progressive Failure of Reinforced Steep Slopes,” International Geosynthetics Society, Japanese Chapter, Tokyo, 1999.






Residual versus Peak Soil Strength in Stability Calculations,” International Symposium on Slope Stability Engineering, Matsuyama, Japan, Nov. 1999.






Analysis, Design and Case Histories of Geosynthetic Tubes,” invited lecture at a specialty workshop held at Cheng Kung University, Tainan, Taiwan, Aug. ‘99.






“Use of Computer Software for the Design of Geosynthetic Reinforced Structures,” Huesker Corporation, Gescher, Germany, January 1999.






Issue and Nonissue in Block Walls as Implied through Computer Aided Design,” 12th GRI Conference, Philadelphia, December 1998.






“Use of Computer in Design of RSS and MSEW,” lecture sponsored by the Italian Chapter of the International Geosynthetic Society and the Technical University of Turin, Turin, Italy, November 1998.






Design of Reinforced Steep Slopes, Reinforced Walls, and Embankment over Soft Soil,” Technical University of Norway, Trondheim, October 1998.






"A Case History of Design, Construction and Performance of Reinforced Embankment over Soft Soil," University of Tokyo, Japan, October 1997.






"A Case History of Design, Construction and Performance of Reinforced Embankment over Soft Soil," ASCE Annual National Convention, Minneapolis, Minnesota, October, 1997.






Use of Geotextile Tubes to Contain Waste Paper Sludge,” International Workshop on the Use of the Paper Industry Sludge in the Environmental Geotechnology, Helsinki, Finland, August 1997.






Construction and Performance of Reinforced Embankment over Soft Soil,” Technion, Israel Institute of Technology, Haifa, June 1997.






”Unified Approach to Reinforced Slopes and Walls,” Technion, Israel Institute of Technology, Haifa, April 1997.






”Use of Computer in Design of Reinforced Slopes,” Israel National Civil Engineering Conference, Jerusalem, Israel, March 1997.






Geosynthetics in Geotechnical Engineering Applications,” 1-day Workshop, Mekorot - Israel National Water Company, Tel Aviv, March 1997.






”Design Aspects of Geotextile Tubes,” Technion, Israel Institute of Technology, Haifa, March 1997.






Design Aspects of Geotextile Tubes,” 76th Annual Transportation Research Board meeting in Washington, DC, January 1997.






"Analysis and Design of Geosynthetic Tubes," University of Tokyo, Institute of Industrial Sciences, and at Gunma University, Japan, November 1996.






"Analysis, Design and Construction of Reinforced Embankment over Soft Soil," University of Tokushima and at Gunma University, Japan, November 1996.






"Current Design Methods of Geosynthetic Reinforced Soil Structures in the US," Conference on Soil Reinforcement, Kyushu, Japan, November 1996.






"Seismic Design of Geosynthetic Reinforced Walls," Conference on Soil Reinforcement, Kyushu, Japan, November 1996.






"Analysis and Design of Geosynthetically Reinforced Slopes and Walls," Course for geotechnical engineers in Fredericksburg, Virginia, May 1995 (sponsored by Colorado Transportation Institute and Virginia DOT).






“Some Applications of Geosynthetic Reinforcement of Soil," Technion-Israel Institute of Technology, Geotechnical Program, March 1995, Haifa, Israel.






"Design of Geosynthetic Reinforced Slopes and Segmental Walls," Advances in Reinforced Soil, January 1995, National Cheng Kung University, Taiwan.






"Reinforced Embankment Over Soft Soil: A Case History," National ASCE meeting, October 1994, Atlanta.






"Geosynthetic Reinforced Steep Slopes and Walls: Effects of Facing Blocks," keynote lecture, First International Seminar on Slope Stability Engineering held in December 1993 in Tokushima, Japan.






"Three Dimensional Slope Stability Analysis," meeting of the committee on 3-D Evaluation of Ground Failures, Japanese Society of Soil Mechanics and Foundation Engineering, July 26, 1993, Tokyo, Japan.






"Crust Compaction: Dredged Material Containment Site South Blakeley, Mobile, Alabama," 26th Ann. Dredging Seminar, May 26, 1993, Atlantic City, NJ






"Geotextile Tubes and Crust Compaction: Field Tests Results, Mobile, Alabama," Waterways Experiment Station, Vicksburg, MS., March 1993.






"Low Cost Construction Utilizing Geosynthetics and other Issues," Drexel University, PA., February 1993.






"Issues in Geosynthetic-Reinforced Soil," keynote lecture, International Symposium on Earth Reinforcement Practice, Nov. '92, Kyushu, Japan.






"Active versus Reactive Reinforcement Force: Design Implications," International Symposium on Recent Case Histories of Permanent Geosynthetic-Reinforced Soil Retaining Walls, Nov. '92, Tokyo, Japan.






"Comparison of Rigorous Slope Stability Methods: Statical Aspects," Stability and Performance of Slopes and Embankments Conference in UC Berkeley, session on Benchmark Problems, June 1992.






"Behavior of Clay Balls in a Dredge Pipeline," with S. Richter and J. Fowler, 13th Conf. of the Western Dredging Association, Mobile, Alabama, May 1992.






State‑of‑the‑art report: "Design of Geosynthetically Reinforced Slopes," Geotechnical Engineering Congress, Boulder, Colorado, June 1991.






"Reinforced Embankment over Soft Foundation," Johns Hopkins University, Department of Civil Engineering, Baltimore, April 1991.






"Variational Slope Stability Analysis," University of Oxford, Dept. of Engineering Science, UK, March 1991.






"Construction of Reinforced Embankments on Soft Foundations," Geotechnical Engineering Group, ASCE, Maryland Section, Baltimore, March 1991.






"Stability of Reinforced Embankment over Soft Foundation," Regional Symposium on Polymer Reinforced Soil Structures, Orlando, FL, March 1991.






"Failure of Cohesionless Model Slopes Reinforced with Flexible and Extensible Inclusions," 70th meeting of the Trans. Research Board, Wash., DC, Jan. ‘91.






"Clayballing in Dredging Operations," Waterways Experiment Station, U.S. Army Corps of Engineers, Vicksburg, Mississippi, October 1990.






"Construction over Soft Soil Using High‑Strength Geotextile," Woodward‑Clyde, Plymouth Meeting, Pennsylvania, October 1990.






"Field Installation of Strain Gaged Geotextiles," ASCE Materials Congress, Denver, Colorado, Aug. 1990.






"Fabric Reinforced Containment Dike, New Bedford Superfund site," 4th International Conference on Geotextiles, The Hague, The Netherlands, May 1990.






"Geosynthetic Reinforced Soil Structures," and "Bearing Capacity of Shallow Foundations," Institute of Industrial Science, University of Tokyo, Japan, October 1989.






"Laboratory Study of Strain Gaged High‑Strength Geotextiles," Waterways Experiment Station, U.S. Army Corps of Engineers, Vicksburg, Mississippi, April 1989.






"Reinforcement Against Deep ‑ Seated Failures: Stability Analysis," International Symposium on Theory and Practice of Earth Reinforcement, Fukuoka, Kyushu, Japan, October 1988.






"A Design Procedure for Geotextile‑Reinforced Walls," Geosynthetic Conference, New Orleans, LA, February, 1987.






"In‑Soil Load Elongation, Tensile Strength and Interface Friction of Nonwoven Geotextiles," Geosynthetic Conference, New Orleans, LA, February, 1987.






"Predictive Equation for the Stability of Geotextile Reinforced Earth Structures," 3rd International Conference on Geotextiles, Vienna, Austria, April, 1986.






"Performance Tests for Geotextiles in Railroad Track," 65th annual meeting of the Transportation Research Board, Washington, DC, January 1986.






"Stability Charts for Geotextile Reinforced Walls," 64th annual meeting of the Transportation Research Board, Washington, DC, January, 1985.






"Track Quality Index," 62nd annual meeting of the Transportation Research Board, Washington, DC, January 1983.






"A Simplified Methodology to Evaluate the Effect of Heavier Axle Load on Track Substructure Performance," 2nd International Heavy Haul Railway Conference, Colorado Springs, Colorado, Sept. 1982.






"Behavior of Soil‑Fabric‑Ballast System," Geotechnical Division, Illinois Section of ASCE, Chicago, Illinois, October 1981.






"Laboratory Investigation of Geotextile," Committee 1, American Railway Engineering Association, Pueblo, Colorado, October 1980.




Directory: directories
directories -> Resolution
directories -> American bar association adopted by the house of delegates
directories -> 109a american bar association adopted by the house of delegates february 10, 2014
directories -> Adopted by the house of delegates
directories -> 115 american bar association adopted by the house of delegates february 6, 2017
directories -> American bar association adopted by the house of delegates
directories -> 112g american bar association criminal justice section report to the house of delegates
directories -> American bar association standing committee on paralegals report to the house of delegates
directories -> 119b american bar association adopted by the house of delegates august 14-15, 2017
directories -> 107d american bar association adopted by the house of delegates february 9, 2015

Download 0.65 Mb.

Share with your friends:
1   2   3   4   5




The database is protected by copyright ©ininet.org 2024
send message

    Main page