Getting Started with Maximo Anywhere 5 Document version 0


System Requirements and Supported Configurations



Download 152.5 Kb.
Page4/7
Date17.06.2017
Size152.5 Kb.
#20972
1   2   3   4   5   6   7

System Requirements and Supported Configurations


Our tests show that a single Worklight server can support many mobile devices. If high availability is a factor, at least two Worklight servers should be configured in a cluster and load balanced so that in the event of a failure, Worklight will continue to be available.

The link below provides the most up to date information for minimum prerequisites and other specifications. Please review this content in detail.

https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/IBM%20Maximo%20Asset%20Management/page/Maximo%20Anywhere%20system%20requirements

Installation Procedures

Whether you have an existing Maximo implementation or you are starting a new one, Maximo Anywhere 7.5 mobile solutions are designed to “plug in” to your system using dedicated components combined with state of the art Open Service for Lifecycle Collaboration (OSLC) integration communications.


Before you begin, you should understand the difference between a multi-instance database and a multi-schema database. A multi-instance database environment is one where a database server is configured with distinct database instances for connectivity and storage of data. A multi-schema database environment is one where a single database instance is configured and database objects such as tables and indexes are setup under unique users/owners. In multi-schema, there is only one database but owners within that database have access to different objects.
Out of the box, Worklight expects to be in a multi-instance environment. In cases where multi-schema is required, please follow the installation procedures closely for your database environment.
The following sections describe the procedure for installing the Maximo Anywhere software. Architectural considerations are delineated, so please refer to the section that applies to your system. The first six steps are common to all architectures.

  1. Download the appropriate Packages from Passport Advantage

  • Maximo Anywhere

  • Worklight Server

  1. Extract the contents of the Maximo Anywhere package into a folder called "Launchpad"


  2. Extract the disk1 folder of Worklight Server package into Launchpad\masterSetupDisk


  3. Run the Launchpad for your Corresponding Architecture (32 or 64 bit)


  4. Click on Install Required Components, point to your Maximo directory and install Maximo Integration Framework and Maximo Anywhere Enablement and
    information center to your current Maximo environment as you would any other Maximo FP install.

    1. IBM recommends that you choose to manually defer the update and deployment option.

  5. Once complete, manually run updatedb from ibm\smp\maximo\tools\maximo folder. Then rebuild and redeploy the maximo.ear file.

Note: Worklight is shipped with WebSphere Liberty, a lighter version of WebSphere which does not require configuration for Worklight deployment. The following steps include steps for configuring the full versions of WebSphere. Those steps are identified by the words “On the WebSphere Server”.

To use the included WebSphere Liberty product, select “Install WebSphere Application Server Liberty Profile” from the application server panel. If you are using Liberty, steps identified by “On the WebSphere Server” can be skipped.



If you are not using the included WebSphere Liberty option, before you begin the Worklight Server installation, confirm that a WebSphere profile has been setup in your WebSphere environment for Worklight. See the following link for more information on WebSphere profile management:

http://pic.dhe.ibm.com/infocenter/wasinfo/v8r5/topic/com.ibm.websphere.base.doc/ae/tpro_profiles.html

Worklight Server/DB2/Multi Instance


  1. Before beginning the Worklight Install, create the DB2 user that you will use for Worklight and assign the user to the DB2ADMIN group such as DB2USERS on the operating system hosting your DB2 database. Note: The DB2 user is created at the Operating System level. Create an OS user for DB2 to use with the Worklight DB. We create a user called “wluser” as an example. Replace instances of wluser with the username you create.

  1. Run the following statements to create the required databases and grant permissions to the Worklight database user you created above.

CREATE DATABASE WORKLIGHTDB COLLATE USING SYSTEM PAGESIZE 32768
CONNECT TO WORKLIGHTDB
GRANT CONNECT ON DATABASE TO USER wluser
DISCONNECT WRKLGHT
CREATE DATABASE WLREPORT COLLATE USING SYSTEM PAGESIZE 32768
CONNECT TO WLREPORT
GRANT CONNECT ON DATABASE TO USER wluser
DISCONNECT WLREPORT
CREATE DATABASE APPCNTR COLLATE USING SYSTEM PAGESIZE 32768
CONNECT TO APPCNTR
GRANT CONNECT ON DATABASE TO USER wluser
DISCONNECT APPCNTR
QUIT

  1. Click on the 'Install Maximo Anywhere Work Manager' and check the box beside 'IBM Worklight Server for Worklight Consumer Edition'


  2. Select the Work Light Version 5.0.6 Install Package and click next.


  3. Choose your shared install directory path then click next then choose the installation directory for Worklight, click next again.


  4. On the database configuration screen choose IBM DB2 Enterprise Server Edition V9.7 and later.



  1. On the setting screen enter the following data and click next three times

Hostname: {host_name} for the db2 server

Port: port to the db2 server (generally 50000 for windows, 50005 for UNIX platforms)

User name: WLUSER created previously

Password: WLUSER password created previously.

IBM DB2 Driver for JDBC: Download the driver from the link provided on the install screen, extract the driver, and point this installer field to it.


  1. For full WebSphere installs, on the application server choice screen choose 'Use pre-installed application server' then choose 'WebSphere Application Server (Liberty Profile, 7.0,8.0,8.5 Full Profile)' and click next.



  1. For full WebSphere installs, select the directory for your WebSphere Application Server that contains the Worklight Profile (e.g c:\IBM\WebSphere\AppServer.)



  1. For full WebSphere installs, choose the Worklight Profile and then Select the Worklight Server and enter your WASADMIN username and password.


  2. For full WebSphere installs, select the Installation Mode, either Single user or Multiple users. If multiple users select the appropriate OS group and continue until you can click install.


  3. For full WebSphere installs, if prompted for an install package point to your disk1 folder in Launchpad\masterSetupDisk.

This will install and deploy the Worklight Server to WebSphere Full Profile. You can verify the appcenterconsole and worklight console are running using the following URL.

http://{yourhostname}:{yourport}/worklight/console



http:// {yourhostname}:{yourport}/appcenterconsole


Download 152.5 Kb.

Share with your friends:
1   2   3   4   5   6   7



The database is protected by copyright ©ininet.org 2024
send message
    Main page
device connects