Introduction section1: general requirements
Lighting Power Density – Interior
Download 2.29 Mb.
|
- Navigate this page:
- Lighting Power Density – Exterior
Lighting Power Density – InteriorThe average Lighting Power Density for the interior connected lighting load for specific building types must be no more than the watts per square metre of gross floor area given in the Table. Table – Interior Lighting Power Density
Lighting Power Densities for building types not listed in the Table should be no greater than those values given in ASHRAE 90.1-2007 Table 9.5.1.or equivalent as approved by DEWA Lighting Power Density – ExteriorThe average Lighting Power Density for the exterior connected lighting load must be no more than the values given in the Table. Table – Building Exterior Lighting Power Density
Lighting Power Densities for exterior areas not listed in Table should be no greater than those values given in ASHRAE 90.1-2013 or equivalent as approved by DEWA. Download 2.29 Mb. Share with your friends:
|