Open Systems Manager (Front Cover)
Download 0.88 Mb. View original pdf
|
- Navigate this page:
- INTRODUCTION
| Nomenclature Description Table 1-4. Specifications Property Characteristic/Value INESM01 module and adapter boards: Power requirements A maximum at 5 VDC Memory 8 Mbyte RAM Operating frequency MHz Communication rate Mbaud (Ethernet adapter board) Input/output Ethernet port Keyboard port Header for floppy disk drive and IDE hard disk drive SCSI port Serial communication port VGA video port (video adapter board) System capability Up to 30,000 database points typical Mounting Module and adapter boards occupy 1 standard INFI 90 OPEN module mounting unit slot INTRODUCTION SPECIFICATIONS 1 - 8 WBPEEUI350001B0 ® INDDM01 module: Power requirements A maximum for 4 secs at power up A maximum operating A nominal operating Disk drive capacity One 120-Mbyte hard disk drive One in, 1.44-Mbyte floppy disk drive NTSM01 termination unit: Power requirements A maximum at 24 VDC, 48 W maximum Common mode voltage, all inputs Vrms, Installation category III Fuse 3 A, 125 V Mounting Screw mounts to an NFTP01 Field Termination Panel INOSM01 environmental: Electromagnetic/radio frequency interference Meets IEC 801-3, level 3, 10 V/m Keep cabinet doors closed. Do not use communication equipment any closer than 2 m (6.6 ft) from the cabinet. Operating temperature to C (32° to 131°F) Relative humidity to 90% relative humidity up to CF) noncondensing (storage and transportation to 80% relative humidity up to CF) noncondensing (CF) wet bulb, operating) Atmospheric pressure tom to 10,000 ft) operating tom to 40,000 ft) not operating Air quality Noncorrosive INOSM01 certification CSA certification for use as process control equipment in an ordinary (nonhazardous) environment. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. Table 1-5. Type Base Specifications Download 0.88 Mb. Share with your friends:
|