34
9 DRAINAGE STRUCTURES AND FACILITIES 9.1 Drain and Culvert 9.1.1 All U-shaped drains and box culverts shall be designed
to be hydraulically adequate, structural sound and geotechnically stable in accordance
with the current codes, specifications and requirements.
9.1.2 All roadside drains shall be constructed in accordance with
the standard Land Transport Authority's specifications shown in Drawing No. 1 or such other drawings to be issued by Land Transport Authority or the Board. The roadside drains shall be provided with false bottom as maybe required by the Board.
9.2 Transition A transition is required where there is a change of drain cross-section. The purpose of a transition is to change the shape of flow and surface profile in such a manner that minimum energy losses occur and cross waves and other turbulence are reduced. This maybe achieved using tapering walls with no sudden changes of cross-section. The minimum length of a transition shall betimes the width of the wider drain section.
9.3 Curves and Bends 9.3.1 The presence of curves or bends in drain alignment is sometimes unavoidable. Difficulties in design often arise because of the complexity of the flow around a curved path. A drain curve will increase frictional loss and lead to the danger of serious local erosion due to spiral flow. Hence, the radius of any horizontal curve
shall be as large as possible, consistent
with the general terrain, in order to reduce the super elevation of the water surface and preserve the freeboard. A horizontal curve shall have a minimum radius of 3 times the width of the drain channel.
9.3.2 The benching of the drain at the bend shall be configured to minimise sedimentation at the inner side of the bend.
For this purpose, the dry weather flow channel at the bend shall be aligned towards
the outer side of the bend, with the centre of the channel spaced at a quarter of the drain width from the outer cope of the drain.
Share with your friends: