Pi bailey Sem api interface Manual

Testing Connection to ICI

Download 2.52 Mb.

Page	10/43
Date	01.09.2022
Size	2.52 Mb.
	#59441

1 ... 6 7 8 9 10 11 12 13 ... 43

PI BaSemAPI Manual
PI BASemAPI, UniInt Interface User Manual

Digital States
System Digital State Set

Testing Connection to ICI

Bailey created a connection test utility called Talk90. This utility was distributed with the runtime kit in the past, but as of Bailey semAPI 2.0, it is no longer distributed in the runtime kit. It is still distributed with the supervisory control kit.
Running the test utility looks similar to this:

1-Establish Point	2-Establish Report	3-Output Miscellaneous
4-Connect Point List	5-Disconnect Point List	6-Read Value List
7-Read Status List	8-Read Exceptions	10-Output Value
11-Output Status	12-Module Operation	13-Read Block
14-Read Next Block	15-Read Default Block	16-Write Block
17-Tune Block	18-Delete Block	19-ICI Restart
20-Read Block Output	21-Read Misc Status List	22-Read Misc Stat Excep
23-Disestablish Point	24-Read Excep Report Spec	26-Read Problem Report
27-Demand Module Status	28-Regenerate Specs	29-Output General Msg
33-Set ICI Status	34-Read Work Flag	35-Read Value Group
36-Disconnect Point Group	37-Connect Point Group	38-Read Status Group
39-Read Misc Status Group	40-Output Value Group	41-ICI Callup
42-ICI Hangup	43-Read System Time/Date	44-ICI Online/Offline
45-Output Misc Group	46-Read Ext Prob Report	47-Output Status Group
100-Connect to ICI	101-Disconnect from ICI	102-ICI Management
103-Quick Commands	104-Get Exceptions	105-Enet Commands
106-Block I/O Commands	107-DBUS Commands	108-Firmware Commands
109-Misc. Module Info	110-Decode Error Number
777-Repeat Last Command	888-Next Page	999-Exit

Option: 100
Logical ICI: 1
Timeout is in seconds.
Timeout: 5
Valid Users:
0 = SHARED
1 = EXCLUSIVE
Type of User: 1
Tagnames: 0 = DO NOT RETURN TAGNAMES, 1 = RETURN TAGNAMES
Tagnames: 0
Option 100 should be used to make sure that at least a connection to the ICI can be made. If the connection is not successful, Bailey should be contacted.

Digital States

For more information regarding Digital States, refer to the Data Archive Manuals.

Digital State Sets

PI digital states are discrete values represented by strings. These strings are organized in PI as digital state sets. Each digital state set is a user-defined list of strings, enumerated from 0 to n to represent different values of discrete data. For more information about PI digital tags and editing digital state sets, see the PI Server manuals.
An interface point that contains discrete data can be stored in PI as a digital tag. A Digital tag associates discrete data with a digital state set, as specified by the user.
A PI tag for the Station Status is normally defined as a digital point. A set should be defined with these states in this order:

Manual (unlocked)
Auto (unlocked)
Cascade (unlocked)
Digital Station Failure
Manual (locked)
Control station bypassed
Auto (locked)
Cascade (locked)

System Digital State Set

Similar to digital state sets is the system digital state set. This set is used for all tags, regardless of type to indicate the state of a tag at a particular time. For example, if the interface receives bad data from an interface point, it writes the system digital state bad input to PI instead of a value. The system digital state set has many unused states that can be used by the interface and other PI clients. Digital States 193-320 are reserved for OSIsoft applications.
For more information regarding Digital States, refer to the Data Archive Manuals.

Download 2.52 Mb.

Share with your friends:

1 ... 6 7 8 9 10 11 12 13 ... 43