Pi interface for Bailey Infi90
Download 1.41 Mb. View original pdf
|
- Navigate this page:
- 64-bit application
- Supported Features Feature Support
- PI Interface for Bailey Infi90 3 Feature Support
- Uses PI SDK
| Introduction 2 Reference Manuals OSIsoft PI Server manuals PI API Installation Instructions manual UniInt Interface User Manual ABB/Bailey Computer Interface Unit Programmer's Reference Manual (E) Supported Operating Systems Platforms 32-bit application 64-bit application Windows XP bit OS Yes No bit OS Yes (Emulation Mode) No Windows 2003 Server bit OS Yes No bit OS Yes (Emulation Mode) No Windows Vista bit OS Yes No bit OS Yes (Emulation Mode) No Windows 2008 bit OS Yes No Windows 2008 R bit OS Yes (Emulation Mode) No Windows 7 bit OS Yes No bit OS Yes (Emulation Mode) No Windows 8 bit OS Yes No bit OS Yes (Emulation Mode) No Windows 2012 bit OS Yes (Emulation Mode) No The interface is designed to run on the above mentioned Microsoft Windows operating systems and their associated service packs. Please contact OSIsoft Technical Support for more information. Supported Features Feature Support Interface Part Number PI-IN-BA-I90-NTI Auto Creates PI Points No Point Builder Utility No ICU Control Yes PI Point Types Float / Float / Float / Digital / Int / Int Sub-second Timestamps No PI Interface for Bailey Infi90 3 Feature Support Sub-second Scan Classes No Automatically Incorporates PI Point Attribute Changes Yes * Exception Reporting Yes Outputs from PI Yes Inputs to PI Unsolicited Supports Questionable Bit No Supports Multi-character PointSource No Maximum Point Count About 500 for CIU01, 2500 for CIU02, 5000 for CIU03, 10000 for CIU04, and 10000 for ICI * Uses PI SDK No PINet String Support No * Source of Timestamps PI Server computer History Recovery No UniInt-based * Disconnected Startup * SetDeviceStatus No No No * Failover Yes * Vendor Software Required on Interface Node / PINet Node No Vendor Software Required on Foreign Device No Vendor Hardware Required Yes Additional PI Software Included with interface No Device Point Types Net90/Infi90 point types 1, 2, 3, 4, 5, 6, 7, 12, 13, 14, 15, 19, 21, and 22 Serial-Based interface Yes * See paragraphs below for further explanation. Uses PI SDK The PI SDK and the PI API are bundled together and must be installed on each interface node. This interface does not specifically make PI SDK calls. Download 1.41 Mb. Share with your friends:
|