Presentation library

Conditional Symbology Procedure SLCONS04

Download 7.92 Mb.

Page	33/53
Date	23.04.2018
Size	7.92 Mb.
	#46652

1 ... 29 30 31 32 33 34 35 36 ... 53

User Parameter(s): None. Defaults
Loop for each spatial component of the object

13.2.13 Conditional Symbology Procedure SLCONS04

Applies to: S-57 Object Class "shoreline construction" (SLCONS)
Spatial Object(s): Point, Line, Area
Attribute(s) used: S57 object attributes: (CATSLC, CONDTN, WATLEV). Spatial attribute QUAPOS
User Parameter(s): None.
Defaults: Display Priority given by look-up table; OVERRADAR priority given by look-up table; Display Category given by look-up table; Viewing Group given by look-up table. Note these parameters may vary depending on the feature’s geometric primitive.
Remarks: Shoreline construction objects which have a QUAPOS attribute on their spatial component indicating that their position is unreliable are symbolized by a special linestyle in the place of the varied linestyles normally used. Otherwise this procedure applies the normal symbolization.
Figure 29 SLCONS04 conditional symbology procedure

Entry point	The calling Shoreline Construction object.
Is Point?	Is the calling object type Point?
QUAPNT02	Perform the symbology procedure 'QUAPNT02' which returns a flag indicating whether or not to display the low accuracy symbol and returns the selected symbol 'LOWACC01'. It happens if the attribute 'QUAPOS' of the spatial object equal one of the following values: '2', '3', '4', '5', '6', '7', '8' or '9'.
Calling Object	Input parameter
LOWACC01	Output parameter
Does 'QUAPNT02' return 'LOWACC01'?	Is the symbol 'LOWACC01' selected by the procedure 'QUAPNT02'?
SY(LOWACC01)	If so indicated by the procedure 'QUAPNT02', draw the returned low accuracy symbol 'LOWACC01' at the calling object's location in the viewing group 31011
Loop for each spatial component of the object	Loop for each spatial component of the calling object: Setup - The Calling Object. Test - While there is unprocessed spatial component Body - Symbolize spatial components
Exit Procedure	Symbolization is finished

Figure 30 Loop for each spatial component of area and line SLCONS object

LOOP entry point	Spatial components of the calling object.
Get spatial component	Get the next spatial component of the calling object.
Has value ('QUAPOS')?	Is the value of the attribute 'QUAPOS' given?
'QUAPOS' != 1 && 10 && 11?	Does the value of attribute 'QUAPOS' equal to neither of the following values: '1', '10', and '11'?
LC(LOWACC21)	Draw spatial component with line pattern 'LOWACC21'
Symbolize the spatial component	Symbolize the spatial component with as follows, using strict look up table matching procedures: "SLCONS" "" "LS(SOLD,2,CSTLN)" "SLCONS" "CONDTN1" "LS(DASH,1,CSTLN)" "SLCONS" "CONDTN2" "LS(DASH,1,CSTLN)" "SLCONS" "CATSLC6" "LS(SOLD,4,CSTLN)" "SLCONS" "CATSLC15" "LS(SOLD,4,CSTLN)" "SLCONS" "CATSLC16" "LS(SOLD,4,CSTLN)" "SLCONS" "WATLEV2" "LS(SOLD,2,CSTLN)" "SLCONS" "WATLEV3" "LS(DASH,2,CSTLN)" "SLCONS" "WATLEV4" "LS(DASH,2,CSTLN)"
continue	Go to the next spatial component of the object.

Directory: iho pubs -> draft pubs -> PresLib e4.0.0 -> Part I

Download 7.92 Mb.

Share with your friends:

1 ... 29 30 31 32 33 34 35 36 ... 53