Programming guide friendly ghost language


APPENDIX B - GHOSTWRITER COMMANDS - Quick Reference Chart



Download 1.07 Mb.
Page26/27
Date29.01.2017
Size1.07 Mb.
#11977
1   ...   19   20   21   22   23   24   25   26   27

APPENDIX B - GHOSTWRITER COMMANDS - Quick Reference Chart





  • ROW/COLUMN COMMAND -

  • ROTATION COMMAND - No rotation

Rotate right (+90)

Rotate upside down (+180)

Rotate left (+270 or - 90)


  • HEIGHT/WIDTH COMMAND -

  • FONT SIZE COMMAND - Font1 characters (5x7)

Font2 characters (8x16)

OCRB (17x31)

OCRA (5x9)

large OCRB (30x52)

OCRA (15x29)

Courier (20x40)(20x33)

small OCRB (13x20)



Prestige (25x41)

Script (25x49)

Orator (46x91)

Courier (20x40)(20X42)



  • BOXSIZE COMMAND -

  • CLEAR BUFFER COMMAND -

  • GRAPHICS COMMAND - byte1,byte2,byte3,byte4,byte5,byte6,byte7 OR

byte1,byte2...byte#

Old style - rotation commands have no effect on bar codes.

A= U (for upc and ean8)

A= E (for ean-13)

A= N (for three of nine)

A= F (for interleaved two of five)

A= C (for uss-codabar)

A= O (for code 128)


New style - rotation commands do effect bar codes.

a= u (for upc and ean8)

a= e (for ean-13)

a= n (for three of nine)

a= f (for interleaved two of five)

a= c (for uss-codabar)

a= o (for code 128)

a= s (for softstrip)

B= P (for picket-fence)

B= L (for ladder)

# = width of bar code

string = bar code data




  • BAR CODE EXPANDED COMMAND -

  • BAR CODE RATIO ADJUST - string or string

  • PRINTING LENGTH COMMAND -
    or


  • PERMANENT TICKET LENGTH COMMAND -

  • DELETE PERMANENT LENGTH COMMAND -

  • REPEAT COMMAND - not available on Mag printers

  • TRANSPARENT MODE ON -

  • TRANSPARENT MODE OFF -

  • STATUS REQUEST -

  • PROM TYPE AND TICKET COUNT STATUS REQUEST -

  • DELAYED STATUS - or

  • NO STATUS - or

  • ASCII STATUS - or

  • DOWNLOAD BYTES AVAILABLE STATUS -

  • PARTIAL ASCII STATUS - or

  • DIRTY BYTES TOTAL STATUS

  • CLEAR PERMANENT STATUS COMMAND -

  • PRINT DOWNLOADABLE FONT -

  • PRINT DOWNLOADABLE LOGO -

  • PRINT LOGO -

  • STARTING POINT - for logos only

  • DRAW BOX COMMAND -

  • DRAW VERTICAL LINE -

  • DRAW HORIZONTAL LINE -

  • LINE THICKNESS COMMAND -

  • RESET TICKET COUNT - [not available on FGL42/22]

  • PRINT TICKET COUNT -


  • LOAD TICKET COUNT -

  • ENABLE INVERTED PRINT MODE -

  • DISABLE INVERTED PRINT MODE -

  • CRT MESSAGE ENABLE -

  • CRT MESSAGE DISABLE -

  • MULTIPLE TICKET MODE DISABLED -

  • MULTIPLE TICKET MODE ENABLED -

  • DIAGNOSTIC MODE COMMAND -

  • PURGE PRINTER OF REMAINING TICKETS COMMAND -


  • PARKING TICKET COMMAND -
    or


  • DELETE PERMANENT PARKING TICKET COMMAND -

  • SINGLE BUFFER MODE COMMAND -

  • MULTIPLE BUFFER MODE COMMAND -

  • EXPANDED CHARACTER MODE ENABLE COMMAND -

  • EXPANDED CHARACTER MODE DISABLE COMMAND -

  • TRANSLATION TABLE COMMAND - or

  • RESIDENT FONT TRANSLATION TABLE ENABLE/DISABLE COMMAND - or

  • TEST BUTTON DISABLED COMMAND -


  • TEST BUTTON ENABLED COMMAND -

  • PRINT ON TICKET PATH #1 -


  • PRINT ON TICKET PATH #2 -


  • DUAL MODE -



  • DUAL SUPPLY MODE -


  • VENTEK DUAL SUPPLY MODE -


  • CASH DRAW A COMMAND -

  • CASH DRAW B COMMAND -

  • ENABLE TEST TICKET ACKNOWLEDGE COMMAND -

  • DISABLE TEST TICKET ACKNOWLEDGE COMMAND -

  • FILE ID COMMAND -

  • PERMANENT FILE COMMAND -
    [not available on FGL22/24]

  • TEMPORARY FILE COMMAND -

  • DELETE FILE COMMAND -

  • NORMAL PRINT / CUT COMMAND - 0CH (FF) or


  • PRINT / NO CUT - 1DH or

  • PRINT & EJECT TICKET -

  • PRINT / CUT (HOLD TICKET IMAGE) - not available on Mag printers

  • PRINT / NO CUT (HOLD TICKET IMAGE) - not available on Mag printers

  • CASH DRAW COMMAND - 1CH

  • LOAD DOWNLOADABLE LOGO - ESC(BYTE1 -BYTE#) (BYTES)...ESC

  • CLEAR DOWNLOADABLE STORAGE AREA – ESCc

    • LOW VOLTAGE ENABLE -

    • OVERWRITE ENABLE COMMAND -

    • OVERWRITE DISABLE COMMAND -

    • TOP ADJUSTMENT COMMAND -

    The following commands are NOT AVAILABLE on 22/44 printers



    • SCALE DOWN -

    • SHADE PATTERN IN BACKGROUND -


    • SHADE PATTERN IN FOREGROUND -


    • SHADE PATTERN # -


    • ENABLE SHADING -

    • DISABLE SHADING -

    • PCX FILE BEING SENT COMMAND -


    • NO CUT MODE - For use with FGL Driver only (Windows Only).

    • CUT MODE - For use with FGL Driver only (Windows Only).

    • CENTER TEXT COMMAND -

    • DOWNLOAD TRUETYPE FONT -

    • SELECT TRUETYPE FONT -

    • SELECT TRUETYPE CODEPAGE - or

    • USB DEVICE TYPE HID OR PRINTER - or


    Note: There are additional specialized commands not listed here. Please refer to the following supplements for these commands:
    CONFIGURATION TEST TICKET SUPPLEMENT

    MEMORY INVENTORY COMMAND SUPPLEMENT

    ETHERNET INTERFACE ADDENDUM

    RFID ADDENDUM



    BLUETOOTH ADDENDUM


  • Download 1.07 Mb.

    Share with your friends:
    1   ...   19   20   21   22   23   24   25   26   27




    The database is protected by copyright ©ininet.org 2024
    send message

        Main page