Published by department of transportation
Download 6.74 Mb.
|
- Navigate this page:
- 57-3.04 PAYMENT Not Used 57-3.05–57-3.10 RESERVED
- 58-1.03 CONSTRUCTION Not Used 58-1.04 PAYMENT
- 58-2.01C(1) General Reserved 58-2.01C(2) Test Data
- 58-2.01C(5) Samples Submit samples of the CMUs for each color and texture as specified in ASTM C90. 58-2.01C(6) Qualification Data
- 58-2.01C(8) Daily Field Report and Final Report
- 58-2.01D(1) General Reserved 58-2.01D(2) Quality Control
- 58-2.01D(2)(c) Field Quality Control
- 58-2.01D(2)(c)(ii) Special Inspector
- 58-2.01D(2)(c)(iii) Masonry Compressive Strength Testing
57-3.03 CONSTRUCTIONInstall plastic lumber under the manufacturer's instructions. Cut, bevel, drill, counterbore, and otherwise fabricate plastic lumber under the manufacturer's instructions. Fabricate lumber in the manufacturer's plant to the greatest extent possible. Holes for bolts in plastic lumber must be bored 1/8 inch larger in diameter than the bolt to be placed. Holes for lag screws must be bored to a diameter under the manufacturer's instructions. Recess bolts and lag screw heads 1/2 inch from the surface of the face of plastic lumber fenders. Coat holes drilled through CPL members with a concrete sealant approved by the CPL manufacturer. Plastic lumber elements that are split, broken, warped, or otherwise damaged are rejected.
57-3.04 PAYMENTNot Used 57-3.05–57-3.10 RESERVED58 SOUND WALLS 58-1 GENERAL 58-1.01 GENERALSection 58-1 includes general specifications for constructing sound walls. Reinforcement must comply with section 52. 58-1.02 MATERIALSNot Used 58-1.03 CONSTRUCTIONNot Used 58-1.04 PAYMENTSound walls are measured by the area of wall projected on a vertical plane between the elevation lines and wall length. 58-2 MASONRY BLOCK 58-2.01 GENERAL58-2.01A SummarySection 58-2 includes specifications for constructing masonry block sound walls. 58-2.01B DefinitionsReserved 58-2.01C Submittals58-2.01C(1) GeneralReserved 58-2.01C(2) Test DataSubmit test data for: 1. Prepackaged mortar materials 2. Compressive strength of masonry for preconstruction testing and field QC testing 3. Grout compressive strength 58-2.01C(3) Product DataSubmit manufacturer’s descriptive data for each type of CMU, accessory, and manufactured material as an informational submittal. 58-2.01C(4) Mix DesignSubmit a mix design for each grout mix proposed for use. Admixtures are not allowed unless authorized. Submit a mix design for the mortar cap. 58-2.01C(5) SamplesSubmit samples of the CMUs for each color and texture as specified in ASTM C90. 58-2.01C(6) Qualification DataSubmit qualification data for the authorized laboratory as an informational submittal. 58-2.01C(7) Certificates of ComplianceSubmit a certificate of compliance for CMUs, aggregate for grout, and grout. 58-2.01C(8) Daily Field Report and Final ReportSubmit a copy of the daily field report on the business day following the preparation of the report. Upon completion of the work requiring special inspection, submit a copy of the final report. 58-2.01D Quality Assurance58-2.01D(1) GeneralReserved 58-2.01D(2) Quality Control58-2.01D(2)(a) GeneralReserved 58-2.01D(2)(b) Preconstruction TestingPerform masonry preconstruction testing at an authorized laboratory. The authorized laboratory must comply with ASTM E329. Determine the compressive strength of masonry for each grout mix to be used under one of the following 2010 CBC test methods: 1. Unit strength method in section 2105.2.2.1 except grout must comply with item 3.3.2 in the 1st paragraph of section 2105.2.2.1.2 2. Prism test method in section 2105.2.2.2 If the prism test method is used to determine the compressive strength, you must also test the grout compressive strength under ASTM C1019. If prepackaged mortar materials are used, perform the following preconstruction tests at an authorized laboratory: 1. California Test 551. Test data must be from samples having a moist cure, except that the samples must not be immersed in lime water. The average 28-day compressive strength of mortar must be not less than 1,800 psi. 2. California Test 422 or 417. Mortar must not contain more than 0.05 percent soluble chlorides when tested under California Test 422 or more than 0.25 percent soluble sulfates as SO4 when tested under California Test 417. 58-2.01D(2)(c) Field Quality Control58-2.01D(2)(c)(i) GeneralYou must employ a special inspector and an authorized laboratory to perform Level 1 inspections and structural tests of masonry to verify the masonry construction complies with section 1704 and section 2105 of the 2010 CBC. Masonry special inspection personnel used in the work must not be employed or compensated by any subcontractor, or by other persons or entities hired by subcontractors, who will provide other services or materials for the project. 58-2.01D(2)(c)(ii) Special InspectorThe special inspector must be an ICC certified Structural Masonry Special Inspector. The special inspector must perform the inspections required in section 1704.5 of the 2010 CBC. The special inspector must prepare a daily field report providing information regarding the specific activities witnessed, including placing of CMUs and bar reinforcing, grouting, fabrication of test specimens, and other observations of importance to the work. A daily field report is required for each day that the special inspector is on the job site. The special inspector must prepare a signed final report stating whether the work requiring special inspection was, to the best of the inspector's knowledge, in compliance with the plans, specifications, and the applicable workmanship requirements of these specifications and the 2010 CBC.
58-2.01D(3) Department AcceptanceReserved Directory: esc esc -> Biblical Eschatology Presentation by: D. Paul Beck May 4, 2016 Ground Rules esc -> Mikael Håfstrӧm Screenplay by Miles Chapman and Arnell Jesko esc -> Escort affinity Program for Audi Club Members esc -> Preliminary entry form pistol esc -> Application form esc -> Request from Asian and Pacific Training Centre for Information and esc -> Constitution of the engineering student council university of maryland esc -> Subdisciplines of Earth Science Geology; study of the earth Download 6.74 Mb. Share with your friends:
|