Troubleshooting Device Installation with the Setupapi log File

Download 331.5 Kb.

Page	39/49
Date	10.02.2021
Size	331.5 Kb.
	#55795

1 ... 35 36 37 38 39 40 41 42 ... 49

setupapilog

6.8Service Deletion Pending

If an INF file deletes a service by using a DelService directive, and then it attempts to add the same service by using an AddService directive, SetupAPI will log an error. The following example illustrates the messages that SetupAPI will log under these conditions for a fictitious Blender service. Note that the only way to correct this error is to reboot.

#-035 Processing service Add/Delete section [Blender_Install_Section.Services].

@ 18:28:34.955 #E279 Add Service: Failed to create service "Blender". Error 1072: The specified service has been marked for deletion.

@ 18:28:34.965 #E033 Error 1072: The specified service has been marked for deletion.

@ 18:28:34.975 #E275 Error while installing services. Error 1072: The specified service has been marked for deletion.

@ 18:28:34.985 #T224 Install Device: Cleaning up failed device.

@ 18:28:35.025 #E122 Device install failed. Error 1072: The specified service has been marked for deletion.

@ 18:28:35.035 #T201 Install Device: End.

@ 18:28:35.146 #E154 Class installer failed. Error 1072: The specified service has been marked for deletion.
In the previous example, the #-035 and #E279 messages relate to the INF file adding the Blender service. The #E033 message indicates that the service was previously marked for deletion. Finally, the #E275 through #E154 messages report that device-installation failed and that the service was previously marked for deletion.

Download 331.5 Kb.

Share with your friends:

1 ... 35 36 37 38 39 40 41 42 ... 49